[coreboot] AMD Geode LX800 - CS5536 with Coreboot v3?

[Darmawan Salihun]

Hi Kyosti,

On 1/30/14, Kyösti Mälkki <kyosti.malkki at gmail.com> wrote:
> On 01/30/2014 09:41 AM, Darmawan Salihun wrote:
>> Hi all,
>>
>> Is it still possible to use Coreboot v3 for an AMD Geode LX800-CS5536
>> board?
>> Or do I have to resort to other Coreboot version?
>>
>
> You might be very much on your own just with the v3 build environment. I
> think bachmann/ot200 board is one of the most recent boards with Geode
> LX + CS5536 and some testing on coreboot v4.

OK. I'll have a look at Coreboot v4.
Is this where to clone it from:
http://review.coreboot.org/coreboot.git

??

>
>> I have all the required datasheet and circuit diagram to do the port.
>> The board is a custom board, not from any of the usual motherboard
>> manufacturers.
>>
>> Kind Regards,
>>
>> Darmawan
>
> BTW.. Thanks for your excellent articles at InfoSec on the topic of
> System Address map initialization on PCI.

Sure. Nice to hear people benefited from it.

Kind Regards,

Darmawan
--------------------------------------------------------------------
-= Знания людей принадлежат миру =-
[-Human knowledge belongs to the world-]