[coreboot] Wyse S10 Information

Oliver Schinagl oliver at schinagl.nl
Fri May 28 10:53:01 CEST 2010


On 05/28/10 01:20, Peter Stuge wrote:
> Oliver Schinagl wrote:
>   
>> I get a message from the pata_cs5536 driver that IDE is disabled by
>> the bios; and of course no option to enable it.
>>     
> Try adding pata_cs5536.msr=1 to the kernel parameters, to make the
> driver use native GeodeLink access to the hardware rather than PCI.
> It may or may not ignore the setting then.
>
>
>   
I allready tried that, didn't know what it was for, but i added it to
the module. This was btw when unloading, and reloading the module
though; i'll try to do it with my custom kernel where cs5536 is built in
and then pass the parameter.
>> I'm very convinced that wyse OS is somewhere in the 2Megabyte flash
>>     
> Yes, I also believe you're right about that.
>
>
> //Peter
>
>   





More information about the coreboot mailing list