[coreboot] [PATCH] Support for HP DL165g6 Fam10

[Stefan Reinauer]

On 5/26/10 11:55 AM, Arne Georg Gleditsch wrote:
> Hi,
>
> Attached is a patch implementing support for the HP DL165g6 mainboard
> (with fam10 CPUs).  It is based on the code for the DL145 and
> SerialICE-observation of the vendor ROM.  It touches
> superio/serverengines/pilot/pilot_early_init.c, which is also used by
> the DL145 board.  I belive the changes to be harmless, but it would be
> good if someone with the board in hand could check it out.
>
> As seems to also be the case with the DL145 board, the Matrox VGA ROM
> needs to be loaded by SeaBIOS.
>
> Signed-off-by: Arne Georg Gleditsch <arne.gleditsch at numascale.com>
>
>   
I tried compiling this with HEAD and I get

HOSTCC coreboot-builds/sharedutils/romcc/romcc (this may take a while)
ROMCC mainboard/hp/dl165_g6_fam10/bootblock.inc
romcc_io.h:88.37:
pci_mmio_read_config8 undeclared
make: ***
[coreboot-builds/hp_dl165_g6_fam10/mainboard/hp/dl165_g6_fam10/bootblock.inc]
Error 1


-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de  • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866