[coreboot] [PATCH] Support for HP DL165g6 Fam10
Arne Georg Gleditsch
arne.gleditsch at numascale.com
Wed May 26 11:55:23 CEST 2010
Attached is a patch implementing support for the HP DL165g6 mainboard
(with fam10 CPUs). It is based on the code for the DL145 and
SerialICE-observation of the vendor ROM. It touches
superio/serverengines/pilot/pilot_early_init.c, which is also used by
the DL145 board. I belive the changes to be harmless, but it would be
good if someone with the board in hand could check it out.
As seems to also be the case with the DL145 board, the Matrox VGA ROM
needs to be loaded by SeaBIOS.
Signed-off-by: Arne Georg Gleditsch <arne.gleditsch at numascale.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 42427 bytes
Desc: not available
More information about the coreboot