[coreboot] SeaBIOS on DBE63 not functional

Kevin O'Connor kevin at koconnor.net
Wed Jan 28 19:36:14 CET 2009


On Wed, Jan 28, 2009 at 05:43:31PM +0200, Mart Raudsepp wrote:
> Ühel kenal päeval, K, 2009-01-28 kell 10:28, kirjutas Kevin O'Connor:
> > On Wed, Jan 28, 2009 at 04:25:56AM +0200, Mart Raudsepp wrote:
> > > On T, 2009-01-27 at 20:02 -0500, Kevin O'Connor wrote:
> > > > > The log output at default loglevel of 1 is attached. At higher log
> > > > > levels the last dump seems to come from a different place. Should I
> > > > > gather such logs with a larger loglevel or does this say something
> > > > > revealing already? Anything else I can provide here?
> > > > Those messages aren't reporting a problem - I see them on my epia-cn
> > > > and on qemu.  You'll need to increase the debugging level to see if
> > > > something else is seen before a failure.

I'm CC'ing the coreboot list again.

> I think loglevel 20 went into an infinite loop (just this time maybe?),
> and I see a lot of these blocks, with either three or four entries:
> 
> handle_1c

That's the user timer irq handler.

> enter handle_16:
>   a=00000100 b=00000049 c=00008e26 d=00000000 si=00000010 di=00000044
>   ds=00000000 es=00000000 ip=00008e55 cs=00000000 f=00000246 r=00001fd2

That's grub asking if there is keyboard input.

> handle_08

That's the timer irq handler.

So, you're getting interrupts, and it appears grub is running (or at
least responding to irqs).

BTW, what are you using for a vgabios?  I thought geode didn't have a
vga bios available.

-Kevin




More information about the coreboot mailing list