[coreboot] SeaBIOS on DBE63 not functional

Kevin O'Connor kevin at koconnor.net
Wed Jan 28 16:28:09 CET 2009

On Wed, Jan 28, 2009 at 04:25:56AM +0200, Mart Raudsepp wrote:
> On T, 2009-01-27 at 20:02 -0500, Kevin O'Connor wrote:
> > > The log output at default loglevel of 1 is attached. At higher log
> > > levels the last dump seems to come from a different place. Should I
> > > gather such logs with a larger loglevel or does this say something
> > > revealing already? Anything else I can provide here?
> > 
> > Those messages aren't reporting a problem - I see them on my epia-cn
> > and on qemu.  You'll need to increase the debugging level to see if
> > something else is seen before a failure.
> The output at loglevel 20 is very noisy, it will be probably too high
> for attachment even. The end few kilobytes of output should be as good
> probably? I can put it on some webspace though if there's a chance the
> non-tail parts of it could help.

You can gzip it and mail it to me directly, put it on a website, etc.

Debug level 20 tends to show all the irqs - which can adversely impact
the boot because of timing.  So sending both the log from debug level
20 and a log with debug level 8 would help.


More information about the coreboot mailing list