[coreboot] [PATCH] Remove reset in SB600 SATA speed fall down

[Dan Lykowski]

I thought I had read that it was needed somewhere. I haven't been able to find it again. I based the removal on section 6.5 in the SB600 rpr. I interpreted the end of the section to say the reset could cause problems and was unneeded. It seems to work fine without it. Either way is fine for me, I was just trying to keeps things minimal.

Thanks,
Dan Lykowski 

--- On Sat, 1/24/09, Peter Stuge <peter at stuge.se> wrote:

From: Peter Stuge <peter at stuge.se>
Subject: Re: [coreboot] [PATCH] Remove reset in SB600 SATA speed fall down
To: coreboot at coreboot.org
Date: Saturday, January 24, 2009, 7:00 PM


-----Inline Attachment Follows-----

Dan Lykowski wrote:
> I discovered I didn't need to do the reset when falling down to
> 1.5g.

Docs seemed to say the reset is needed though? Can you comment?


//Peter

--
coreboot mailing list: coreboot at coreboot.org
http://www.coreboot.org/mailman/listinfo/coreboot



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20090125/2e275160/attachment.html>