[coreboot] Problems about booting windows xp

[Wang, Qingpei]

Hi,all
1) My seabios version is 0.3.0
2) In dbm690t seabios + coreboot can boot linux successfully.
3) I tried the windows 7 64bits too, still does not work. 
4) The e820 memory map is 
	0: 0000 0000 0000 0000 - 0000 0000 0009 fc00 1
	1: 0000 0000 0009 fc00 - 0000 0000 000a 0000 2
	2: 0000 0000 000f 0000 - 0000 0000 0010 0000 2
	3: 0000 0000 0010 0000 - 0000 0000 1bff 0000 1
	4: 0000 0000 1bff 0000 - 0000 0000 1c00 0000 2
	5: 0000 0000 1c00 0000 - 0000 0000 3800 0000 1
	6: 0000 0000 3800 0000 - 0000 0000 4000 0000 2

The ACPI table address is 0x1bff0400, MP table address is 1bff3410 
Bios_table_addr is ff0a5~ff841

Look forward your help~~~


Jason Wang
BeiJing Technology Development Center
Advanced Micro Devices (AMD)

-----Original Message-----
From: Kevin O'Connor [mailto:kevin at koconnor.net] 
Sent: Sunday, January 18, 2009 10:10 AM
To: Wang, Qingpei
Cc: Coreboot; Rudolf Marek
Subject: Re: [coreboot] Problems about booting windows xp

On Fri, Jan 16, 2009 at 10:00:39AM +0800, Wang, Qingpei wrote:
>     I am trying to boot windows xp with my dbm690t which has S1G1 CPU,
> sb600 and rs690 chipset. Now, It still soft reset after loading
several
> files. The serial debug message says:
> 
> "fail handle_1ab1:154
> Fail handle_1aXX:274
> Fail get_device:608(00000001)
> Fail handle_15XX:308(00000086)"

Most of the time, these messages are harmless.  They indicate that the
bios returned an error code to the caller - there are many cases where
this is normal.

What version of seabios are you using?
Have you confirmed that coreboot+seabios can boot linux successfully?

-Kevin