[coreboot] fam10/newconfig on supermicro h8dme - early hang

Myles Watson mylesgw at gmail.com
Fri Dec 18 19:38:46 CET 2009

On Fri, Dec 18, 2009 at 10:54 AM, Ward Vandewege <ward at gnu.org> wrote:

> Hi all,
> I'm trying to port the h8dme to fam10. My test hardware has two quad core
> CPUs and 32G of ram. I'm seeing a hang very early on during boot:
> ---------------------------------------
> coreboot-2.0.0-r4978:4979M_h8dme_fam10_Fallback Wed Dec 16 17:29:28 EST
> 2009
> starting...

> Start node 01 done.
> bsp_apicid=00
> pre wait_all_co
> ---------------------------------------
> It stops in the middle of the output there (hang). This is against svn
> head.
> I'm building with xgcc 4.4.1 (same problem with stock Ubuntu gcc 3.4). I'm
> not sure what I'm doing wrong; any pointers to things that I could try?<http://www.coreboot.org/mailman/listinfo/coreboot>

I would check the early startup code for the remote nodes.  It looks like
you hang right where it gets garbled for Knut.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091218/bbb914d1/attachment.html>

More information about the coreboot mailing list