[coreboot] via vt82c686 southbridge

[Daniel Lindenaar]

Daniel Lindenaar wrote:
> Corey Osgood wrote:
>> On Thu, Sep 4, 2008 at 5:20 PM, Daniel Lindenaar
>> <daniel-coreboot at lindenaar.eu> wrote:
>>  
>>> hmmm it's working partly, it seems. First i did something wrong that 
>>> skrewed
>>> up the com port setup, which I fixed. I now get the debug messages I 
>>> added
>>> via the serial line, but, strangely, only when i do a (warm) reboot 
>>> from a
>>> running linux, not with a cold boot... probably something needs to 
>>> be set
>>> that doesn't get set by default on cold reboot.
>>>     
>>
>> Not good. Can you send me a copy of your tree or a patch, and a
>> complete boot log? I've seen the same issue, I just can't remember how
>> I fixed it at the moment. It's something to do with either the romcc
>> build parameters or failover code, I can't remember atm. Also, vt8601
>> is compatible with both c3 and p2/p3, right? Which are you using?
>>
>>   
> OK, there some small progress made. I'll send you a patch later. 
> Here's a complete bootlog. first after a warm reboot, then after a 
> power cycle and then after a reset.
Here's the patch... Hope you can help <:)


-------------- next part --------------
A non-text attachment was scrubbed...
Name: tk3350.patch.gz
Type: application/gzip
Size: 9664 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080906/d6ba07e4/attachment.bin>