[coreboot] patch: set dbe62 to have com2 on com1 address

Marc Jones marc.jones at amd.com
Wed Mar 5 17:33:59 CET 2008

ron minnich wrote:
> On Wed, Mar 5, 2008 at 5:22 AM, Carl-Daniel Hailfinger
> <c-d.hailfinger.devel.2006 at gmx.net> wrote:
>>  If you look at the dbe61 dts, you can see the same settings except that
>>  dbe61 additionally sets com2_irq = "4".
> and there is a good question. I might have misread the v2 code, I will
> have to go back and check.
> But will com2 still interrupt on irq 3 no matter what? I'm never sure
> how things go on this chipset.
> ron

There is no chipset default. Each piece needs to be setup. If you didn't 
set it in the mainboard dts it will use the chipset dts default.

Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com

More information about the coreboot mailing list