[coreboot] Video ROM and VSA for Geode LX

Phani Babu Giddi phanig at gmail.com
Mon Mar 3 21:17:32 CET 2008


Yes I have tested and I can see the messages. Do I need to check how the
serial port on DB800 board has been routed. Looks like the Config ROM
expects it to be on 3f8 and take out from the Winbond Super IO. If the board
has picked up the serial port either from the sourth bridge of else if its
using some other port then that could be the reason for this.

How about the Video ROM image does it go after VSA or before that ?


On Mon, Mar 3, 2008 at 12:12 PM, Marc Jones <marc.jones at amd.com> wrote:

> Phani,
> It should just work. Have you tested a serial console with the normal
> BIOS in Linux?
> Marc
> --
> Marc Jones
> Senior Firmware Engineer
> (970) 226-9684 Office
> mailto:Marc.Jones at amd.com
> http://www.amd.com/embeddedprocessors
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080303/31726d89/attachment.html>

More information about the coreboot mailing list