[coreboot] [PATCH] v2: Enable printk in CAR for all AMD K8 boards
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Mon Dec 22 10:53:53 CET 2008
On 15.12.2008 23:03, Marc Jones wrote:
> On Thu, Dec 11, 2008 at 6:40 PM, Carl-Daniel Hailfinger
> <c-d.hailfinger.devel.2006 at gmx.net> wrote:
>
>> Hi,
>>
>> in the process of trying to debug some HT sync problems I added lots of
>> debug code to src/northbridge/amd/amdk8/incoherent_ht.c.
>> However, printk is not available for all boards at that stage.
>>
>> I'd like to change the following boards:
>> agami/aruma
>> arima/hdama
>> asus/a8n_e
>> broadcom/blast
>> ibm/e325
>> ibm/e326
>> iwill/dk8s2
>> iwill/dk8x
>> msi/ms7135
>> newisys/khepri
>> sunw/ultra40
>> tyan/s2850
>> tyan/s2875
>> tyan/s2880
>> tyan/s2881
>> tyan/s2882
>> tyan/s2885
>> tyan/s2891
>> tyan/s2892
>> tyan/s2895
>> tyan/s4880
>> tyan/s4882
>>
>> abuild works fine for all of them.
>> agami/aruma needs a Config-abuild.lb which doesn't have fallback and
>> normal due to size problems.
>>
>> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
>>
>>
>
> Thanks, This needed doing.
> Acked-by: Marc Jones <marcj303 at gmail.com>
>
Thanks, committed in r3829.
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
More information about the coreboot
mailing list