[coreboot] [PATCH] v2: Enable printk in CAR for all AMD K8 boards

[Marc Jones]

On Thu, Dec 11, 2008 at 6:40 PM, Carl-Daniel Hailfinger
<c-d.hailfinger.devel.2006 at gmx.net> wrote:
> Hi,
>
> in the process of trying to debug some HT sync problems I added lots of
> debug code to src/northbridge/amd/amdk8/incoherent_ht.c.
> However, printk is not available for all boards at that stage.
>
> I'd like to change the following boards:
> agami/aruma
> arima/hdama
> asus/a8n_e
> broadcom/blast
> ibm/e325
> ibm/e326
> iwill/dk8s2
> iwill/dk8x
> msi/ms7135
> newisys/khepri
> sunw/ultra40
> tyan/s2850
> tyan/s2875
> tyan/s2880
> tyan/s2881
> tyan/s2882
> tyan/s2885
> tyan/s2891
> tyan/s2892
> tyan/s2895
> tyan/s4880
> tyan/s4882
>
> abuild works fine for all of them.
> agami/aruma needs a Config-abuild.lb which doesn't have fallback and
> normal due to size problems.
>
> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
>

Thanks, This needed doing.
Acked-by: Marc Jones <marcj303 at gmail.com>