[LinuxBIOS] LinuxBios with SuperIO Winbond W83627HG-AW

Marc Jones marc.jones at amd.com
Mon Aug 27 23:22:17 CEST 2007

Steffen D. wrote:
> Dear Mailinglist,
> im trying to build a bios for GeodeLX cpu. I have a development board 
> from LogicPC. Afaik this is the same board that was used for the 
> development for OLCP.
> I try it with the svn version Linuxbios-3. I have made a image with make 
> menuconfig and configured everything cleary for the geodelx board. I 
> flash the rom with windows and a galep 5 flash device.
> Im very sure that the flashing works because i can clone the bios which 
> comes with the board.
> I dont get any output over rs232.
> Im using SST 49LF004B roms with 4mbit. Maybe here is the problem? I have 
> made linuxbios.rom with a target size of 2mb. I also tryed "cat 
> linuxbios.rom linuxbios.rom > linuxbios4m.rom". I found this hin here in 
> the ml.
> Every help is welcome!
> Regards,
> Steffen

Use linuxBIOS v2 and buildrom to build GeodeLX platforms. Start with the 
amd/norwich or amd/db800 mainboards.


Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com

More information about the coreboot mailing list