[LinuxBIOS] LB Post codes
yinghailu at gmail.com
Sat Jul 1 14:31:56 CEST 2006
that is right. the post code is only useful before we get the output
from serial port.
On 7/1/06, Stefan Reinauer <stepan at coresystems.de> wrote:
> * bios at lists.actweb.info <bios at lists.actweb.info> [060701 02:43]:
> > From what ive read on the LB site, LB uses post codes quitre a bit,
> > but i cant find a list of the codes ANYWARE :(
> > Ive just tried LB on a VIA-EPAI-PD10000 board using the EPAI-M LB
> > config (i dont have a serial cable connected at present, going to grab
> > one tomorow!)
> Getting the system up without serial cable is really hard to impossible
> I guess..
> The post codes are not really used in LinuxBIOS as far as I can say.
> coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
> Tel.: +49 761 7668825 • Fax: +49 761 7664613
> Email: info at coresystems.de • http://www.coresystems.de/
> linuxbios mailing list
> linuxbios at linuxbios.org
More information about the coreboot