[LinuxBIOS] No console, yet... Ideas?

Richard Smith smithbone at gmail.com
Tue Jan 24 00:03:01 CET 2006

> pc/104 slot and no jtag.  The superIO is controled by a via vt1211.  I
> think I have that part of my config correct. (see below) But I am not
> sure how to figure out the pnp address.

Normally the superIO will have the address set in hardware by a pin
strapping.  Get the datasheet on the superIO and look at the options. 
Then verify by some simple IO testing to the data register.  You
should be able to write a value to the data register and then read it

Richard A. Smith

More information about the coreboot mailing list