[LinuxBIOS] S2735 tree is totall broken

[YhLu]

with romcc, also there is a werid reset, in raminit stage

LinuxBIOS-1.1.8_s2735_Fallback Thu Jun 16 19:15:24 PDT 2005 starting...

SMBus controller enabled

Ram1.00
Ram2.00
Ram3

LinuxBIOS-1.1.8_s2735_Fallback Thu Jun 16 19:15:24 PDT 2005 starting...
SMBus controller enabled
Ram1.00
Ram2.00
Ram3
Ram4
PCI: 00:00.00
00: 86 80 4c 25 06 00 90 00 01 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
40: 09 00 05 11 00 00 00 00 00 00 00 00 00 00 00 00
50: 04 60 0d 00 00 00 00 00 00 30 33 33 33 33 33 33
60: 10 20 30 40 50 60 60 60 00 00 00 00 00 00 00 00
70: 44 44 44 00 00 00 00 00 1f 02 01 39 79 02 67 20
80: b1 0b 71 00 00 00 00 00 00 98 10 d2 88 00 00 00
90: 00 00 00 00 00 00 00 00 55 05 55 05 01 02 38 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 44 c0 50 11 00 c0 60 00 70 00 00 00 00 00 00 00
d0: 02 28 00 0e 03 00 00 33 80 09 31 b5 00 00 00 00
e0: 1c 1d 00 00 00 00 00 00 58 44 00 00 00 00 00 00
f0: 00 00 00 00 76 00 30 40 40 0f 00 00 00 00 00 00
Done.
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8_s2735_Fallback Thu Jun 16 19:15:24 PDT 2005 booting...
clocks_per_usec: 4538
Enumerating buses...
PCI_DOMAIN: 0000 enabled
APIC_CLUSTER: 0 enabled
done
Allocating resources...
Reading resources...
PCI_DOMAIN: 0000 missing read_resources
APIC_CLUSTER: 0 missing read_resources
PCI_DOMAIN: 0000 missing read_resources
APIC_CLUSTER: 0 missing read_resources
Done reading resources.
Setting resources...
PCI_DOMAIN: 0000 missing read_resources
APIC_CLUSTER: 0 missing read_resources
PCI_DOMAIN: 0000 missing read_resources
APIC_CLUSTER: 0 missing read_resources
Done setting resources.
Done allocating resources.
Enabling resourcess...
PCI_DOMAIN: 0000 missing enable_resources
APIC_CLUSTER: 0 missing enable_resources
done.
Initializing devices...
Root Device init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
Inconsistent IRQ routing table size (0xd0/0x110)
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
/home/yhlu/xx/xx/freebios2/src/arch/i386/boot/pirq_routing.c:
36:check_pirq_routing_table() - checksum is: 0x91 but should be: 0a
done.
Wrote the mp table end at: 00000020 - 000001e4
Wrote linuxbios table at: 00000500 - 00000b9c  checksum 56e5

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3