building romimage for tyan s2850 mainboard

Stefan Reinauer stepan at
Sun Sep 12 05:09:00 CEST 2004

* Sagiv Yefet <sagivy at> [040912 12:50]:
> In order to start I wanted to build only the normal image. Only to see
> some output in the console.
> I made the following changes in 
> * put the romimage "fallback" statement in comment.
> * remove "fallback from build: buildrom ./linuxbios.rom ROM_SIZE
> "normal"

The way LinuxBIOS is built you need to build a fallback image without
normal image instead. This will work. 

The fallback image is more a "base image" whereas the normal image is an
"add on image".


More information about the coreboot mailing list