AW: LinuxBios now working on Epia MII-10000

[Ignacio Verona]

Ok, tonight I'll send you a ready-to-burn image, and please, if you burn
it with bios savior, try to write your experience. I've had a lot of
problems using it, and finally, i'm using two flash I get from a local
distributor (for free :D), but biosSavior is not working.

> Sounds interessting, I want a simialr thing (for private)
> but didn't start for now..  I bought This Bios-Savior now, -
> can you provide me a bootable "ready ROM" for a quick test?
>
> Regards,
> -Ingo
>
>
> -----Ursprüngliche Nachricht-----
> Von: Ignacio Verona [mailto:nacho at estudio-verona.com]
> Gesendet: Montag, 17. Mai 2004 13:05
> An: Baab, Ingo
> Cc: linuxbios at clustermatic.org
> Betreff: AW: LinuxBios now working on Epia MII-10000
>
>
> Ingo: I've been working on linuxbios for 2 weeks or so (Delayed by
> BiosSavior not working properly :( ) and what I have now is (as I've said
> in subject, Epia mII-10000 but I think almost everything should work on
> epia-m as well):
>
> LinuxBios booting, from hw detection to linux login on serial console,
> with on-board ethernet. I haven't tested sound so far, my main goal was to
> boot with linuxbios.
>
> what I do not have is:
> VGA working (It seems to detect, but monitor doesn't show anything).
> PCMCIA/CF slot. If I boot with them on board linuxbios will reboot
> forever.
>
> More about car-pc: Is my final course proyect, and I will do an interface
> for controlling mp3/video playing, maybe a modification to GiantDisc, but
> I'm still not sure.
>
> If u want to know anything else, please, let me know.
>
>
>> Hello Ignacio,
>> I want to start also a in-car-project, can you
>> inform me about the state of your project?
>> How far are you, what is working ;))?
>> Thank You,
>> -Ingo from Germany
>>
>> -----Urspr¨¹ngliche Nachricht-----
>> Von: Ignacio Verona [mailto:nacho at estudio-verona.com]
>> Gesendet: Samstag, 15. Mai 2004 17:10
>> An: linuxbios at clustermatic.org
>> Betreff: LinuxBios now working on Epia MII-10000
>>
>>
>> At least, I've linuxbios booting my kernel with filo. Now I've a few
>> questions:
>>
>> 1. When booting, it stops about 2 o 3 secs on "Jumping to entry point".
>> Is
>> this normal? Can't I reduce this time? (My main purpouse of using LB is
>> for
>> getting as small boot time as possible for my in-car PC)
>>
>> 2. Can I get acpi to work on Epia? I mean, halt and power-off the
>> system?
>>
>> thanks!!
>> _______________________________________________
>> Linuxbios mailing list
>> Linuxbios at clustermatic.org
>> http://www.clustermatic.org/mailman/listinfo/linuxbios
>>
>>
>> *******************************************
>> Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte
>> Informationen. Wenn Sie nicht der richtige Adressat sind oder diese
>> E-Mail
>> irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender
>> und
>> loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
>> Weitergabe dieser Mail ist nicht gestattet.
>>
>> This e-mail may contain confidential and/or privileged information. If
>> you
>> are not the intended recipient (or have received this e-mail in error)


>> please notify the sender immediately and delete this e-mail. Any
>> unauthorized copying, disclosure or distribution of the contents in this
>> e-mail is strictly forbidden.
>> *******************************************
>>
>>
>
>
> *******************************************
> Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte
> Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail
> irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und
> loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte
> Weitergabe dieser Mail ist nicht gestattet.
>
> This e-mail may contain confidential and/or privileged information. If you
> are not the intended recipient (or have received this e-mail in error)
> please notify the sender immediately and delete this e-mail. Any
> unauthorized copying, disclosure or distribution of the contents in this
> e-mail is strictly forbidden.
> *******************************************
>
>