答复: PVR with LinuxBIOS. What board is recommended? Some questions
YhLu at tyan.com
Mon Apr 26 16:31:37 CEST 2004
S2850 would be better that s2880.
It only takes one CPU.
发件人: Hendricks David W. [mailto:dwh at lanl.gov]
发送时间: 2004年4月26日 14:11
收件人: Jochen Roemling
抄送: linuxbios at clustermatic.org
主题: Re: PVR with LinuxBIOS. What board is recommended? Some questions
On Mon, 26 Apr 2004, Jochen Roemling wrote:
> I spent hours on the net trying to find a suitable motherboard. To be
> serious: I found not even one that seems to be supported by LinuxBIOS,
> supports everything I need and is still in the shops of the retailers or
> eBay. The Status page on linuxbios.org seems to contain mainly very
> small boards with only 2 or 3 PCI slots that are aimed towards cluster
The EPIA-M seems to be a popular choice for personal video apps.
> reply at least yes or no, I would then commit a HOWTO if I get the whole
> stuff working:
> 1. I found out that LinuxBIOS supports VGA only for very few chipsets
> like the SiS630. If I would use a VGA card that comes with it's own BIOS
> (let's say some ATI radeon) and not using any on-board-VGA-device, would
> it work if the mainboard has a LinuxBIOS-supported chipset? My feelings
> say "yes", don't they?
Vendors haven't exactly been the most cooperative with sharing VGABIOS
info. But we do have video working at least on the EPIA, SiS630, and now
the Rage XL chips that come on server boards like the S2885 and HDAMA.
However, you probably want something more powerful than those. We don't
have nVidia or ATi Radeon support coming up from the get-go just yet, but
so far we've been able to start a GeForce FX vgabios with 8x AGP support
on a Tyan S2885. This is done with an x86 emulator that runs the vgabios
after LinuxBIOS has already started.
> 3. Just to verify that I understood everything right: The Kernel that is
> burned into the DoC will be the kernel that runs the machine after
> bootup and it is possible to mount the root fs via NFS just like LTSP
> does? Or will the kernel on the DoC just to be used to initialize the
> hardware and then load another kernel via the net or from disk? Or do I
> have both possibilities?
You can boot your kernel from pretty much anywhere. If your flash part is
big enough, you can put a kernel on it. Otherwise, you can boot off an ide
hard disk, compact flash, or over the network.
> 4. Is it correct that kernel 2.4.19 is the latest one supported by
> LinuxBIOS? Should the patches be good for 2.4.26 also? What about 2.6?
You can run any kernel. We're currently running 2.6.5 on our Opteron
> Maybe you can recommend some motherboards out of the box that are still
> available in the shops? They should support CPUs with about 1200 MHz,
HOw much did you want to spend on the thing? If you want fast, you might
want to try a Tyan S2880, as YhLu has that working with VGA (Rage XL). It
also has plenty of PCI slots, and will take dual Opterons.
Linuxbios mailing list
Linuxbios at clustermatic.org
More information about the coreboot