[coreboot-gerrit] Change in coreboot[master]: Documentation: Spell "blob" in lowercase

[Jonathan Neuschäfer (Code Review)]

Jonathan Neuschäfer has uploaded this change for review. ( https://review.coreboot.org/28827


Change subject: Documentation: Spell "blob" in lowercase
......................................................................

Documentation: Spell "blob" in lowercase

It's not an acronym (outside of database software).

Change-Id: I529561e4fc9889be7f9d6bd6d5f9a876e2007671
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer at gmx.net>
---
M Documentation/mainboard/lenovo/xx20_series.md
M Documentation/mainboard/lenovo/xx30_series.md
M Documentation/northbridge/intel/sandybridge/nri_features.md
3 files changed, 5 insertions(+), 5 deletions(-)



  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/27/28827/1

diff --git a/Documentation/mainboard/lenovo/xx20_series.md b/Documentation/mainboard/lenovo/xx20_series.md
index 976a29b..8603853 100644
--- a/Documentation/mainboard/lenovo/xx20_series.md
+++ b/Documentation/mainboard/lenovo/xx20_series.md
@@ -26,8 +26,8 @@
 * Do **NOT** accidently swap pins or power on the board while a SPI flasher
   is connected. It will destroy your device.
 * It's recommended to only flash the BIOS region. In that case you don't
-  need to extract BLOBs from vendor firmware.
-  If you want to flash the whole chip, you need BLOBs when building
+  need to extract blobs from vendor firmware.
+  If you want to flash the whole chip, you need blobs when building
   coreboot.
 * The shipped *Flash layout* allocates 3MiB to the BIOS region, which is the space
   usable by coreboot.
diff --git a/Documentation/mainboard/lenovo/xx30_series.md b/Documentation/mainboard/lenovo/xx30_series.md
index e65a3f2..ad85605 100644
--- a/Documentation/mainboard/lenovo/xx30_series.md
+++ b/Documentation/mainboard/lenovo/xx30_series.md
@@ -26,8 +26,8 @@
 * Do **NOT** accidently swap pins or power on the board while a SPI flasher
   is connected. It will permanently brick your device.
 * It's recommended to only flash the BIOS region. In that case you don't
-  need to extract BLOBs from vendor firmware.
-  If you want to flash the whole chip, you need BLOBs when building
+  need to extract blobs from vendor firmware.
+  If you want to flash the whole chip, you need blobs when building
   coreboot.
 * The *Flash layout* shows that by default 7MiB of space are available for
   the use with coreboot.
diff --git a/Documentation/northbridge/intel/sandybridge/nri_features.md b/Documentation/northbridge/intel/sandybridge/nri_features.md
index 51297bd..d700b54 100644
--- a/Documentation/northbridge/intel/sandybridge/nri_features.md
+++ b/Documentation/northbridge/intel/sandybridge/nri_features.md
@@ -8,7 +8,7 @@
     * There might be errors to fix.
     * Position in romstage doesn't matter.
 2.  mrc.bin raminit
-    * Closed Source (aka BLOB)
+    * Closed Source (aka blob)
     * No known errors.
     * Needs to be placed at fixed offset in romstage.
 

-- 
To view, visit https://review.coreboot.org/28827
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I529561e4fc9889be7f9d6bd6d5f9a876e2007671
Gerrit-Change-Number: 28827
Gerrit-PatchSet: 1
Gerrit-Owner: Jonathan Neuschäfer <j.neuschaefer at gmx.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot-gerrit/attachments/20180930/24c4bab0/attachment.html>