[coreboot-gerrit] Change in ...coreboot[master]: Coreboot: Add support for USB host mode for mistral platform
Name of user not set (Code Review)
gerrit at coreboot.org
Fri Nov 30 11:14:07 CET 2018
nsekar at codeaurora.org has uploaded this change for review. ( https://review.coreboot.org/c/coreboot/+/29966
Change subject: Coreboot: Add support for USB host mode for mistral platform
......................................................................
Coreboot: Add support for USB host mode for mistral platform
Add required changes for USB host mode working on mistral platform for USB disk
enumeration.
Change-Id: I35ec549b49b9789389c80843f6103e7243d52aac
Signed-off-by: Nitheesh Sekar <nsekar at codeaurora.org>
Signed-off-by: Vijayavardhan Vennapusa <vvreddy at partner-android.googlesource.com>
Signed-off-by: Sricharan R <sricharan at codeaurora.org>
---
M src/mainboard/google/mistral/mainboard.c
M src/mainboard/google/mistral/romstage.c
M src/soc/qualcomm/qcs405/Makefile.inc
M src/soc/qualcomm/qcs405/include/soc/addressmap.h
M src/soc/qualcomm/qcs405/include/soc/clock.h
M src/soc/qualcomm/qcs405/include/soc/iomap.h
A src/soc/qualcomm/qcs405/include/soc/usb.h
A src/soc/qualcomm/qcs405/usb.c
8 files changed, 370 insertions(+), 11 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/66/29966/1
diff --git a/src/mainboard/google/mistral/mainboard.c b/src/mainboard/google/mistral/mainboard.c
index c249a32..7201874 100644
--- a/src/mainboard/google/mistral/mainboard.c
+++ b/src/mainboard/google/mistral/mainboard.c
@@ -16,10 +16,34 @@
#include <device/device.h>
#include <bootblock_common.h>
#include <timestamp.h>
+#include <soc/usb.h>
+
+static struct usb_board_data usb0_board_data = {
+ .parameter_override_x0 = 0x63,
+ .parameter_override_x1 = 0x03,
+ .parameter_override_x0 = 0x1d,
+ .parameter_override_x1 = 0x03,
+};
+
+static struct usb_board_data usb1_board_data = {
+ .parameter_override_x0 = 0x63,
+ .parameter_override_x1 = 0x03,
+ .parameter_override_x0 = 0x1d,
+ .parameter_override_x1 = 0x03,
+};
+
+static void setup_usb(void)
+{
+ /* Setting Primarty usb controller */
+ setup_usb_host(HSUSB_SS_PORT_0, &usb0_board_data);
+
+ /* Setting secondary usb controller */
+ setup_usb_host(HSUSB_HS_PORT_1, &usb1_board_data);
+}
static void mainboard_init(device_t dev)
{
-
+ setup_usb();
}
static void mainboard_enable(device_t dev)
diff --git a/src/mainboard/google/mistral/romstage.c b/src/mainboard/google/mistral/romstage.c
index 71968fc..31e5113 100644
--- a/src/mainboard/google/mistral/romstage.c
+++ b/src/mainboard/google/mistral/romstage.c
@@ -20,12 +20,19 @@
#include <console/console.h>
#include <timestamp.h>
#include <arch/stages.h>
+#include <soc/usb.h>
#ifdef CONFIG_QC_SOC_SIMULATE
extern void qcs405_mmu_dram_config_c(void);
#endif
void platform_romstage_main(void)
{
+ /*
+ * Do DWC3 core and phy reset. Kick these resets off early
+ * so they get atleast 1msec to settle.
+ */
+ reset_usb(HSUSB_SS_PORT_0);
+ reset_usb(HSUSB_HS_PORT_1);
#ifdef CONFIG_QC_SOC_SIMULATE
qcs405_mmu_dram_config_c();
#endif
diff --git a/src/soc/qualcomm/qcs405/Makefile.inc b/src/soc/qualcomm/qcs405/Makefile.inc
index 57d59f8..c174cae 100644
--- a/src/soc/qualcomm/qcs405/Makefile.inc
+++ b/src/soc/qualcomm/qcs405/Makefile.inc
@@ -27,6 +27,7 @@
romstage-y += mmu.c
romstage-$(CONFIG_DRIVERS_UART) += uart.c
romstage-$(CONFIG_QC_SOC_SIMULATE) += flash_controller.c
+romstage-y += usb.c
################################################################################
ramstage-y += soc.c
@@ -37,6 +38,7 @@
ramstage-y += clock.c
ramstage-$(CONFIG_DRIVERS_UART) += uart.c
ramstage-$(CONFIG_QC_SOC_SIMULATE) += flash_controller.c
+ramstage-y += usb.c
################################################################################
diff --git a/src/soc/qualcomm/qcs405/include/soc/addressmap.h b/src/soc/qualcomm/qcs405/include/soc/addressmap.h
index 435b680..696bc42 100644
--- a/src/soc/qualcomm/qcs405/include/soc/addressmap.h
+++ b/src/soc/qualcomm/qcs405/include/soc/addressmap.h
@@ -23,4 +23,12 @@
#define TLMM_NORTH_TILE_BASE 0x1300000
#define TLMM_SOUTH_TILE_BASE 0x1000000
+/* USB BASE ADDRESS */
+#define USB_HOST0_DWC3_BASE 0x758C100
+#define USB3_USB30_QSCRATCH_BASE 0x7678800
+#define USB2_FEMTO_PHY_PRI_BASE 0x007A000
+
+#define USB_HOST1_DWC3_BASE 0x78CC100
+#define USB2_USB30_QSCRATCH_BASE 0x79B8800
+#define USB2_FEMTO_PHY_SEC_BASE 0x007C000
#endif /* __SOC_QUALCOMM_QCS405_ADDRESS_MAP_H__ */
diff --git a/src/soc/qualcomm/qcs405/include/soc/clock.h b/src/soc/qualcomm/qcs405/include/soc/clock.h
index aa8bbe5..d02ecd7 100644
--- a/src/soc/qualcomm/qcs405/include/soc/clock.h
+++ b/src/soc/qualcomm/qcs405/include/soc/clock.h
@@ -65,10 +65,10 @@
/**
* USB BCR registers
*/
-#define GCC_USB_HS_PHY_CFG_AHB_BCR 0x1841038
+#define GCC_USB_HS_PHY_CFG_AHB_BCR 0x180000C
#define GCC_USB_HS_BCR 0x1841000
#define GCC_USB_30_BCR 0x1839000
-#define GCC_USB2A_PHY_BCR 0x1841028
+#define GCC_USB2A_PHY_BCR 0x180000C
#define GCC_USB2_HS_PHY_ONLY_BCR 0x1841034
#define GCC_QUSB2_PHY_BCR 0x184103C
diff --git a/src/soc/qualcomm/qcs405/include/soc/iomap.h b/src/soc/qualcomm/qcs405/include/soc/iomap.h
index 2a7a148..571c62f 100644
--- a/src/soc/qualcomm/qcs405/include/soc/iomap.h
+++ b/src/soc/qualcomm/qcs405/include/soc/iomap.h
@@ -99,14 +99,6 @@
#define GPIO_CONFIG_ADDR(x) (TLMM_BASE_ADDR + 0x1000 * (x))
#define GPIO_IN_OUT_ADDR(x) (GPIO_CONFIG_ADDR(x) + 4)
-/* Yes, this is not a typo... host2 is actually mapped before host1. */
-#define USB_HOST2_XHCI_BASE 0x10000000
-#define USB_HOST2_DWC3_BASE 0x1000C100
-#define USB_HOST2_PHY_BASE 0x100F8800
-#define USB_HOST1_XHCI_BASE 0x11000000
-#define USB_HOST1_DWC3_BASE 0x1100C100
-#define USB_HOST1_PHY_BASE 0x110F8800
-
#define UART1_DM_BASE ((void *)0x078af000)
#define UART2_DM_BASE ((void *)0x078B1000)
diff --git a/src/soc/qualcomm/qcs405/include/soc/usb.h b/src/soc/qualcomm/qcs405/include/soc/usb.h
new file mode 100644
index 0000000..80674bb
--- /dev/null
+++ b/src/soc/qualcomm/qcs405/include/soc/usb.h
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2018 Qualcomm Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <types.h>
+
+#ifndef _QCS405_USB_H_
+#define _QCS405_USB_H_
+
+/* QSCRATCH_GENERAL_CFG register bit offset */
+#define PIPE_UTMI_CLK_SEL BIT(0)
+#define PIPE3_PHYSTATUS_SW BIT(3)
+#define PIPE_UTMI_CLK_DIS BIT(8)
+
+/* Global USB3 Control Registers */
+#define DWC3_GUSB3PIPECTL_DELAYP1TRANS BIT(18)
+#define DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX BIT(27)
+#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12)
+#define DWC3_GCTL_PRTCAP_OTG 3
+#define DWC3_GCTL_PRTCAP_HOST 1
+
+/* Global USB2 PHY Configuration Register */
+#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) ((n) << 10)
+#define DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
+#define DWC3_GUSB2PHYCFG_PHYIF(n) ((n) << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
+#define USBTRDTIM_UTMI_8_BIT 9
+#define UTMI_PHYIF_8_BIT 0
+
+#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
+#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
+#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
+#define DWC3_GCTL_U2EXIT_LFPS (1 << 2)
+#define DWC3_GCTL_DSBLCLKGTNG (1 << 0)
+
+/* USB2 PHY register values */
+#define USB2PHY_TCSR_CTRL 0x01
+#define USB2PHY_REFCLK_CTRL 0x0d
+#define USB2PHY_UTMI_CTRL5 0x12
+#define USB2PHY_PARAMETER_OVERRIDE_X0 0x63
+#define USB2PHY_PARAMETER_OVERRIDE_X1 0x03
+#define USB2PHY_PARAMETER_OVERRIDE_X2 0x1d
+#define USB2PHY_PARAMETER_OVERRIDE_X3 0x03
+#define USB2PHY_HS_PHY_CTRL1 0x23
+#define QUSB2PHY_HS_PHY_CTRL_COMMON0 0x08
+#define QUSB2PHY_HS_PHY_CTRL_COMMON1 0xdc
+#define USB2PHY_HS_PHY_CTRL2 0xe0
+
+struct usb_board_data {
+ /* Register values going to override from the boardfile */
+ u8 parameter_override_x0;
+ u8 parameter_override_x1;
+ u8 parameter_override_x2;
+ u8 parameter_override_x3;
+};
+
+enum usb_port {
+ HSUSB_SS_PORT_0,
+ HSUSB_HS_PORT_1,
+};
+
+void setup_usb_host(enum usb_port port, struct usb_board_data *data);
+/* Call reset_ before setup_ */
+void reset_usb(enum usb_port port);
+
+#endif /* _QCS405_USB_H_ */
diff --git a/src/soc/qualcomm/qcs405/usb.c b/src/soc/qualcomm/qcs405/usb.c
new file mode 100644
index 0000000..67574cf
--- /dev/null
+++ b/src/soc/qualcomm/qcs405/usb.c
@@ -0,0 +1,250 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2018 Qualcomm Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <lib.h>
+#include <stdlib.h>
+#include <console/console.h>
+#include <delay.h>
+#include <soc/usb.h>
+#include <soc/clock.h>
+#include <soc/addressmap.h>
+#include <timer.h>
+
+struct usb_qscratch {
+ u8 rsvd0[8];
+ u32 *qscratch_cfg_reg;
+
+};
+check_member(usb_qscratch, qscratch_cfg_reg, 0x08);
+
+struct usb_usb2_phy_dig {
+ u8 rsvd1[116];
+ u32 utmi_ctrl5;
+ u32 ctrl_common0;
+ u32 ctrl_common1;
+ u8 rsvd2[12];
+ u32 phy_ctrl1;
+ u32 phy_ctrl2;
+ u8 rsvd3;
+ u32 override_x0;
+ u32 override_x1;
+ u32 override_x2;
+ u32 override_x3;
+ u8 rsvd4[24];
+ u32 tcsr_ctrl;
+ u8 rsvd5[36];
+ u32 refclk_ctrl;
+};
+check_member(usb_usb2_phy_dig, utmi_ctrl5, 0x74);
+check_member(usb_usb2_phy_dig, phy_ctrl1, 0x8C);
+check_member(usb_usb2_phy_dig, override_x0, 0x98);
+check_member(usb_usb2_phy_dig, tcsr_ctrl, 0xC0);
+check_member(usb_usb2_phy_dig, refclk_ctrl, 0xE8);
+
+struct usb_dwc3 {
+ u32 sbuscfg0;
+ u32 sbuscfg1;
+ u32 txthrcfg;
+ u32 rxthrcfg;
+ u32 ctl;
+ u32 pmsts;
+ u32 sts;
+ u32 uctl1;
+ u32 snpsid;
+ u32 gpio;
+ u32 uid;
+ u32 uctl;
+ u64 buserraddr;
+ u64 prtbimap;
+ u8 reserved1[32];
+ u32 dbgfifospace;
+ u32 dbgltssm;
+ u32 dbglnmcc;
+ u32 dbgbmu;
+ u32 dbglspmux;
+ u32 dbglsp;
+ u32 dbgepinfo0;
+ u32 dbgepinfo1;
+ u64 prtbimap_hs;
+ u64 prtbimap_fs;
+ u8 reserved2[112];
+ u32 usb2phycfg;
+ u8 reserved3[60];
+ u32 usb2i2cctl;
+ u8 reserved4[60];
+ u32 usb2phyacc;
+ u8 reserved5[60];
+ u32 usb3pipectl;
+ u8 reserved6[60];
+};
+check_member(usb_dwc3, usb3pipectl, 0x1c0);
+
+struct usb_dwc3_cfg {
+ struct usb_dwc3 *usb_host_dwc3;
+ struct usb_usb2_phy_dig *usb2_phy_dig;
+ struct usb_qscratch *usb_qscratch_reg;
+ u32 *usb2_phy_bcr;
+ u32 *usb2_phy_por_bcr;
+ u32 *usb3_bcr;
+ struct usb_board_data *board_data;
+};
+
+static struct usb_dwc3_cfg usb_host_base[2] = {
+ [HSUSB_SS_PORT_0] = {
+ .usb_host_dwc3 = (void *)USB_HOST0_DWC3_BASE,
+ .usb2_phy_dig = (void *)USB2_FEMTO_PHY_PRI_BASE,
+ .usb2_phy_bcr = (void *)GCC_USB_HS_PHY_CFG_AHB_BCR,
+ .usb2_phy_por_bcr = (void *)GCC_USB2A_PHY_BCR,
+ .usb3_bcr = (void *)GCC_USB_30_BCR,
+ .usb_qscratch_reg = (void *)USB3_USB30_QSCRATCH_BASE,
+ },
+ [HSUSB_HS_PORT_1] = {
+ .usb_host_dwc3 = (void *)USB_HOST1_DWC3_BASE,
+ .usb2_phy_dig = (void *)USB2_FEMTO_PHY_SEC_BASE,
+ .usb2_phy_bcr = (void *)GCC_QUSB2_PHY_BCR,
+ .usb2_phy_por_bcr = (void *)GCC_USB2_HS_PHY_ONLY_BCR,
+ .usb3_bcr = (void *)GCC_USB_HS_BCR,
+ .usb_qscratch_reg = (void *)USB2_USB30_QSCRATCH_BASE,
+ },
+};
+
+void reset_usb(enum usb_port port)
+{
+ struct usb_dwc3_cfg *dwc3 = &usb_host_base[port];
+
+ /* Put Core in Reset */
+ printk(BIOS_INFO, "Starting DWC3 reset for USB%d\n", port);
+
+ /* Assert Core reset */
+ clock_reset_bcr(dwc3->usb3_bcr, 1);
+}
+
+static void usb2_phy_override_phy_params(struct usb_dwc3_cfg *dwc3)
+{
+ write8(&dwc3->usb2_phy_dig->override_x0, dwc3->board_data->parameter_override_x0);
+ write8(&dwc3->usb2_phy_dig->override_x1, dwc3->board_data->parameter_override_x1);
+ write8(&dwc3->usb2_phy_dig->override_x2, dwc3->board_data->parameter_override_x2);
+ write8(&dwc3->usb2_phy_dig->override_x3, dwc3->board_data->parameter_override_x3);
+}
+
+static void hs_usb_phy_init(struct usb_dwc3_cfg *dwc3)
+{
+ write8(&dwc3->usb2_phy_dig->tcsr_ctrl, USB2PHY_TCSR_CTRL);
+ write8(&dwc3->usb2_phy_dig->refclk_ctrl, USB2PHY_REFCLK_CTRL);
+ write8(&dwc3->usb2_phy_dig->utmi_ctrl5, USB2PHY_UTMI_CTRL5);
+ write8(&dwc3->usb2_phy_dig->override_x0, USB2PHY_PARAMETER_OVERRIDE_X0);
+ write8(&dwc3->usb2_phy_dig->override_x1, USB2PHY_PARAMETER_OVERRIDE_X1);
+ write8(&dwc3->usb2_phy_dig->override_x2, USB2PHY_PARAMETER_OVERRIDE_X2);
+ write8(&dwc3->usb2_phy_dig->override_x3, USB2PHY_PARAMETER_OVERRIDE_X3);
+
+ if (dwc3->board_data)
+ /* Overridw board specific PHY tuning values */
+ usb2_phy_override_phy_params(dwc3);
+
+ write8(&dwc3->usb2_phy_dig->phy_ctrl1, USB2PHY_HS_PHY_CTRL1);
+ write8(&dwc3->usb2_phy_dig->ctrl_common0, QUSB2PHY_HS_PHY_CTRL_COMMON0);
+ write8(&dwc3->usb2_phy_dig->ctrl_common1, QUSB2PHY_HS_PHY_CTRL_COMMON1);
+ write8(&dwc3->usb2_phy_dig->phy_ctrl2, USB2PHY_HS_PHY_CTRL2);
+ udelay(20);
+ write8(&dwc3->usb2_phy_dig->utmi_ctrl5, 0x10);
+ write8(&dwc3->usb2_phy_dig->phy_ctrl2, 0x60);
+}
+
+static void setup_dwc3(struct usb_dwc3 *dwc3)
+{
+ /* core exits U1/U2/U3 only in PHY power state P1/P2/P3 respectively */
+ clrsetbits_le32(&dwc3->usb3pipectl,
+ DWC3_GUSB3PIPECTL_DELAYP1TRANS,
+ DWC3_GUSB3PIPECTL_UX_EXIT_IN_PX);
+
+ clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_SCALEDOWN_MASK |
+ DWC3_GCTL_DISSCRAMBLE),
+ DWC3_GCTL_U2EXIT_LFPS | DWC3_GCTL_DSBLCLKGTNG);
+
+ /* configure controller in Host mode */
+ clrsetbits_le32(&dwc3->ctl, (DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)),
+ DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_HOST));
+ printk(BIOS_INFO, "Configure USB in Host mode\n");
+}
+
+/* Initialization of DWC3 Core and PHY */
+void setup_usb_host(enum usb_port port, struct usb_board_data *board_data)
+{
+ struct usb_dwc3_cfg *dwc3 = &usb_host_base[port];
+ u32 val;
+
+ printk(BIOS_INFO, "Setting up USB HOST%d controller.\n", port);
+
+ dwc3->board_data = board_data;
+
+ /* Clear core reset. */
+ clock_reset_bcr(dwc3->usb3_bcr, 0);
+
+
+ if (port == HSUSB_SS_PORT_0) {
+ /* Set PHY reset. */
+ setbits_le32(&dwc3->usb2_phy_bcr, BIT(1));
+ udelay(15);
+ /* Clear PHY reset. */
+ clrbits_le32(&dwc3->usb2_phy_bcr, BIT(1));
+ } else {
+ clock_reset_bcr(dwc3->usb2_phy_bcr, 1);
+ udelay(15);
+ clock_reset_bcr(dwc3->usb2_phy_bcr, 0);
+ }
+ udelay(100);
+
+ /* Initialize PHYs */
+ hs_usb_phy_init(dwc3);
+
+ if (port == HSUSB_SS_PORT_0) {
+ /* Set PHY POR reset. */
+ setbits_le32(&dwc3->usb2_phy_por_bcr, BIT(0));
+ val = read8(&dwc3->usb2_phy_dig->ctrl_common0);
+ val &= ~(0x4);
+ write8(&dwc3->usb2_phy_dig->ctrl_common0, val);
+ udelay(20);
+ /* Clear PHY POR reset. */
+ clrbits_le32(&dwc3->usb2_phy_por_bcr, BIT(0));
+ } else {
+ clock_reset_bcr(dwc3->usb2_phy_por_bcr, 1);
+ val = read8(&dwc3->usb2_phy_dig->ctrl_common0);
+ val &= ~(0x4);
+ write8(&dwc3->usb2_phy_dig->ctrl_common0, val);
+ udelay(20);
+ clock_reset_bcr(dwc3->usb2_phy_por_bcr, 0);
+ }
+ udelay(100);
+
+ setup_dwc3(dwc3->usb_host_dwc3);
+
+ /*
+ * Below sequence is used when dwc3 operates without
+ * SSPHY and only HS/FS/LS modes are supported.
+ */
+
+ /* Configure dwc3 to use UTMI clock as PIPE clock not present */
+ setbits_le32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
+ PIPE_UTMI_CLK_DIS);
+ udelay(2);
+ setbits_le32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
+ PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW);
+ udelay(3);
+ clrbits_le32(&dwc3->usb_qscratch_reg->qscratch_cfg_reg,
+ PIPE_UTMI_CLK_DIS);
+
+ printk(BIOS_INFO, "DWC3 and PHY setup finished\n");
+}
--
To view, visit https://review.coreboot.org/c/coreboot/+/29966
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Change-Id: I35ec549b49b9789389c80843f6103e7243d52aac
Gerrit-Change-Number: 29966
Gerrit-PatchSet: 1
Gerrit-Owner: nsekar at codeaurora.org
Gerrit-Reviewer: Martin Roth <martinroth at google.com>
Gerrit-Reviewer: Patrick Georgi <pgeorgi at google.com>
Gerrit-Reviewer: nsekar at codeaurora.org
Gerrit-MessageType: newchange
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot-gerrit/attachments/20181130/02045d49/attachment-0001.html>
More information about the coreboot-gerrit
mailing list