[coreboot-gerrit] Change in coreboot[master]: siemens/mc_apl3: Adjust Legacy IRQ routing for PCI devices

[Mario Scheithauer (Code Review)]

Mario Scheithauer has uploaded this change for review. ( https://review.coreboot.org/29513


Change subject: siemens/mc_apl3: Adjust Legacy IRQ routing for PCI devices
......................................................................

siemens/mc_apl3: Adjust Legacy IRQ routing for PCI devices

On this mainboard there is a legacy PCI device, which is connected to
the PCIe root port via a PCIe-2-PCI bridge. This device only supports
legacy interrupt routing. For this reason we have to adjust the PIR6
register (0x314c) which is responsible for PCIe device 13h and 14h. This
means that the interrupt routing will also be the same for both PCIe
devices. The bridge is connected to PCIe root port 2 and 3 over two
lanes (Device 13.0 and 13.1).

The following routing is required:
INTA#->PIRQD#, INTB#->PIRQA#, INTC#->PIRQB#, INTD#->PIRQC#

Change-Id: I5028c26769a2122b1c609ad7789c9949e3cb7a87
Signed-off-by: Mario Scheithauer <mario.scheithauer at siemens.com>
---
M src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
1 file changed, 2 insertions(+), 2 deletions(-)



  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/13/29513/1

diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c b/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
index ccf3ab8..f6858b0 100644
--- a/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
+++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl3/mainboard.c
@@ -34,9 +34,9 @@
 
 	/*
 	 * PIR6 register mapping for PCIe root ports
-	 * INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA#
+	 * INTA#->PIRQD#, INTB#->PIRQA#, INTC#->PIRQB#, INTD#-> PIRQC#
 	 */
-	pcr_write16(PID_ITSS, 0x314c, 0x0321);
+	pcr_write16(PID_ITSS, 0x314c, 0x2103);
 
 	/* Disable clock outputs 1-5 (CLKOUT) for XIO2001 PCIe to PCI Bridge. */
 	dev = dev_find_device(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2001, 0);

-- 
To view, visit https://review.coreboot.org/29513
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I5028c26769a2122b1c609ad7789c9949e3cb7a87
Gerrit-Change-Number: 29513
Gerrit-PatchSet: 1
Gerrit-Owner: Mario Scheithauer <mario.scheithauer at siemens.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot-gerrit/attachments/20181106/7d75b7d8/attachment-0001.html>