[coreboot-gerrit] Change in coreboot[master]: google/grunt: Remove BayHub EMMC driving strength override

[Kevin Chiu (Code Review)]

Kevin Chiu has uploaded this change for review. ( https://review.coreboot.org/28084


Change subject: google/grunt: Remove BayHub EMMC driving strength override
......................................................................

google/grunt: Remove BayHub EMMC driving strength override

Side effect was observed that after override BayHub EMMC
driving strength to the max, EMMC CLK will be reduced to
51.x Mhz from 200 Mhz.

This will cause OS installation fail on Samsung EMMC sku.

BUG=b:111964336
BRANCH=master
TEST=emerge-grunt coreboot
Change-Id: I848ab0cae474b15fbc4264c8ade63d5c6b4e489d
Signed-off-by: Kevin Chiu <Kevin.Chiu at quantatw.com>
---
M src/mainboard/google/kahlee/variants/baseboard/mainboard.c
1 file changed, 0 insertions(+), 25 deletions(-)



  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/84/28084/1

diff --git a/src/mainboard/google/kahlee/variants/baseboard/mainboard.c b/src/mainboard/google/kahlee/variants/baseboard/mainboard.c
index b1bd492..cf38b99 100644
--- a/src/mainboard/google/kahlee/variants/baseboard/mainboard.c
+++ b/src/mainboard/google/kahlee/variants/baseboard/mainboard.c
@@ -17,8 +17,6 @@
 #include <baseboard/variants.h>
 #include <gpio.h>
 #include <variant/gpio.h>
-#include <device/pci.h>
-#include <drivers/generic/bayhub/bh720.h>
 
 uint8_t variant_board_sku(void)
 {
@@ -37,26 +35,3 @@
 	gpio_set(GPIO_133, 0);
 }
 #endif
-
-void bh720_driving_strength(struct device *dev)
-{
-	u32 sdbar;
-	u32 bh720_pcr_data;
-
-	sdbar = pci_read_config32(dev, PCI_BASE_ADDRESS_1);
-
-	/* Enable Memory Access Function */
-	write32((void *)(sdbar + BH720_MEM_ACCESS_EN), 0x40000000);
-	write32((void *)(sdbar + BH720_MEM_RW_DATA), 0x80000000);
-	write32((void *)(sdbar + BH720_MEM_RW_ADR), 0x800000D0);
-
-	/* Read current EMMC 1.8V CLK/DATA,CMD driving strength */
-	write32((void *)(sdbar + BH720_MEM_RW_ADR), 0x40000304);
-	bh720_pcr_data = read32((void *)(sdbar + BH720_MEM_RW_DATA));
-
-	/* set EMMC 1.8V CLK/DATA,CMD the max level */
-	write32((void *)(sdbar + BH720_MEM_RW_DATA),
-		bh720_pcr_data | (BH720_PCR_CLK_DRV_MAX << 4) |
-		(BH720_PCR_DATA_CMD_DRV_MAX << 1));
-	write32((void *)(sdbar + BH720_MEM_RW_ADR), 0x80000304);
-}

-- 
To view, visit https://review.coreboot.org/28084
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I848ab0cae474b15fbc4264c8ade63d5c6b4e489d
Gerrit-Change-Number: 28084
Gerrit-PatchSet: 1
Gerrit-Owner: Kevin Chiu <Kevin.Chiu at quantatw.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot-gerrit/attachments/20180814/3ed15894/attachment-0001.html>