[coreboot-gerrit] Change in coreboot[master]: Fizz: Set PL2 and PsysPL2 MSRs
Shelley Chen (Code Review)
gerrit at coreboot.org
Thu Jun 29 21:45:30 CEST 2017
Shelley Chen has uploaded this change for review. ( https://review.coreboot.org/20418
Change subject: Fizz: Set PL2 and PsysPL2 MSRs
......................................................................
Fizz: Set PL2 and PsysPL2 MSRs
BUG=b:7473486, b:35775024
BRANCH=None
TEST=On bootup make sure PL2 and PsysPL2 values set
properly (through debug output)
Change-Id: I847a8458382e7db1689b426f32ff2dcbc5a0899c
Signed-off-by: Shelley Chen <shchen at chromium.org>
---
M src/mainboard/google/fizz/devicetree.cb
M src/mainboard/google/fizz/mainboard.c
M src/soc/intel/skylake/cpu.c
M src/soc/intel/skylake/include/soc/cpu.h
M src/soc/intel/skylake/include/soc/msr.h
5 files changed, 71 insertions(+), 6 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/18/20418/1
diff --git a/src/mainboard/google/fizz/devicetree.cb b/src/mainboard/google/fizz/devicetree.cb
index a493de5..d0bddba 100644
--- a/src/mainboard/google/fizz/devicetree.cb
+++ b/src/mainboard/google/fizz/devicetree.cb
@@ -210,7 +210,6 @@
}"
register "speed_shift_enable" = "1"
- register "tdp_pl2_override" = "7"
register "tcc_offset" = "10" # TCC of 90C
# Use default SD card detect GPIO configuration
diff --git a/src/mainboard/google/fizz/mainboard.c b/src/mainboard/google/fizz/mainboard.c
index a925f08..4eb12d4 100644
--- a/src/mainboard/google/fizz/mainboard.c
+++ b/src/mainboard/google/fizz/mainboard.c
@@ -17,6 +17,7 @@
#include <console/console.h>
#include <device/device.h>
#include <ec/ec.h>
+#include <soc/cpu.h>
#include <soc/pci_devs.h>
#include <soc/nhlt.h>
#include <vendorcode/google/chromeos/chromeos.h>
@@ -24,6 +25,41 @@
static const char *oem_id = "GOOGLE";
static const char *oem_table_id = "FIZZ";
+/*
+ * mainboard_get_pl2
+ *
+ * @return value Pl2 should be set to based on cpu id
+ *
+ * NOTE: This is purely based on cpu id, which only work for the
+ * current build because we have a different cpu id per sku. However,
+ * on the next build, we'll have distinct board ids per sku. We'll
+ * need to modify that at this point.
+ */
+u32 mainboard_get_pl2(void)
+{
+ struct cpuid_result cpuidr;
+
+ cpuidr = cpuid(1);
+ printk(BIOS_DEBUG, "CPU(1): 0x%x\n", cpuidr.eax);
+ if (cpuidr.eax == 0x806ea) {
+ /* i7 needs higher pl2 */
+ return 44;
+ }
+ return 29;
+}
+
+/*
+ * mainboard_get_psyspl2
+ *
+ * This is 90 Watts across all SKUs for Fizz
+ *
+ * @return value PsysPl2 should be set to
+ */
+u32 mainboard_get_psyspl2(void)
+{
+ return 90;
+}
+
static void mainboard_init(device_t dev)
{
mainboard_ec_init();
diff --git a/src/soc/intel/skylake/cpu.c b/src/soc/intel/skylake/cpu.c
index e3be738..825fd15 100644
--- a/src/soc/intel/skylake/cpu.c
+++ b/src/soc/intel/skylake/cpu.c
@@ -104,6 +104,19 @@
[0x11] = 128,
};
+u32 __attribute__((weak)) mainboard_get_pl2(void)
+{
+ device_t dev = SA_DEV_ROOT;
+ config_t *conf = dev->chip_info;
+
+ return conf->tdp_pl2_override;
+}
+
+u32 __attribute__((weak)) mainboard_get_psyspl2(void)
+{
+ return 0;
+}
+
/*
* Configure processor power limits if possible
* This must be done AFTER set of BIOS_RESET_CPL
@@ -115,8 +128,8 @@
unsigned int power_unit;
unsigned int tdp, min_power, max_power, max_time, tdp_pl2;
u8 power_limit_1_val;
- device_t dev = SA_DEV_ROOT;
- config_t *conf = dev->chip_info;
+ u32 pl2_val;
+ u32 psyspl2_val;
if (power_limit_1_time > ARRAY_SIZE(power_limit_time_sec_to_msr))
power_limit_1_time = 28;
@@ -159,10 +172,12 @@
limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) <<
PKG_POWER_LIMIT_TIME_SHIFT;
- /* Set short term power limit to 1.25 * TDP */
+ /* Set short term power limit to 1.25 TDP if no config given */
limit.hi = 0;
- tdp_pl2 = (conf->tdp_pl2_override == 0) ?
- (tdp * 125) / 100 : (conf->tdp_pl2_override * power_unit);
+ pl2_val = mainboard_get_pl2();
+ tdp_pl2 = (pl2_val == 0) ?
+ (tdp * 125) / 100 : (pl2_val * power_unit);
+ printk(BIOS_DEBUG, "CPU PL2 = %u Watts\n", pl2_val);
limit.hi |= (tdp_pl2) & PKG_POWER_LIMIT_MASK;
limit.hi |= PKG_POWER_LIMIT_CLAMP;
limit.hi |= PKG_POWER_LIMIT_EN;
@@ -174,6 +189,18 @@
MCHBAR32(MCH_PKG_POWER_LIMIT_LO) = limit.lo & (~(PKG_POWER_LIMIT_EN));
MCHBAR32(MCH_PKG_POWER_LIMIT_HI) = limit.hi;
+ /* Set PsysPl2 */
+ limit.lo = 0;
+ limit.hi = 0;
+ psyspl2_val = mainboard_get_psyspl2();
+ if (psyspl2_val) {
+ printk(BIOS_DEBUG, "CPU PsysPL2 = %u Watts\n", psyspl2_val);
+ limit.hi |= (psyspl2_val) & PKG_POWER_LIMIT_MASK;
+ limit.hi |= PKG_POWER_LIMIT_EN;
+
+ wrmsr(MSR_PLATFORM_POWER_LIMIT, limit);
+ }
+
/* Set DDR RAPL power limit by copying from MMIO to MSR */
msr.lo = MCHBAR32(MCH_DDR_POWER_LIMIT_LO);
msr.hi = MCHBAR32(MCH_DDR_POWER_LIMIT_HI);
diff --git a/src/soc/intel/skylake/include/soc/cpu.h b/src/soc/intel/skylake/include/soc/cpu.h
index 059367a..47d3e63 100644
--- a/src/soc/intel/skylake/include/soc/cpu.h
+++ b/src/soc/intel/skylake/include/soc/cpu.h
@@ -50,6 +50,8 @@
(IRTL_1024_NS >> 10))
/* Configure power limits for turbo mode */
+u32 mainboard_get_pl2(void);
+u32 mainboard_get_psyspl2(void);
void set_power_limits(u8 power_limit_1_time);
/* CPU identification */
diff --git a/src/soc/intel/skylake/include/soc/msr.h b/src/soc/intel/skylake/include/soc/msr.h
index bb4b8e7..ef4027a 100644
--- a/src/soc/intel/skylake/include/soc/msr.h
+++ b/src/soc/intel/skylake/include/soc/msr.h
@@ -41,5 +41,6 @@
#define MSR_VR_MISC_CONFIG2 0x636
#define MSR_PP0_POWER_LIMIT 0x638
#define MSR_PP1_POWER_LIMIT 0x640
+#define MSR_PLATFORM_POWER_LIMIT 0x65c
#endif
--
To view, visit https://review.coreboot.org/20418
To unsubscribe, visit https://review.coreboot.org/settings
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I847a8458382e7db1689b426f32ff2dcbc5a0899c
Gerrit-Change-Number: 20418
Gerrit-PatchSet: 1
Gerrit-Owner: Shelley Chen <shchen at google.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot-gerrit/attachments/20170629/9aa2eff5/attachment.html>
More information about the coreboot-gerrit
mailing list