[coreboot-gerrit] Patch set updated for coreboot: mc_tcu3: Remove FSP_BAYTRAIL_GFX_INIT in Kconfig

[Werner Zeh (werner.zeh@siemens.com)]

Werner Zeh (werner.zeh at siemens.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/18110

-gerrit

commit 97244532c46c4ae313d55a5e8eba1b3dc7136c67
Author: Werner Zeh <werner.zeh at siemens.com>
Date:   Thu Jan 12 06:52:58 2017 +0100

    mc_tcu3: Remove FSP_BAYTRAIL_GFX_INIT in Kconfig
    
    As the config switch FSP_BAYTRAIL_GFX_INIT is now set per default in
    fsp_baitrail, there is no need to set it here again. Just remove it from
    this Kconfig file.
    
    Change-Id: I9052b36668103d6c4481be13709e5bd157027c4b
    Signed-off-by: Werner Zeh <werner.zeh at siemens.com>
---
 src/mainboard/siemens/mc_tcu3/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/src/mainboard/siemens/mc_tcu3/Kconfig b/src/mainboard/siemens/mc_tcu3/Kconfig
index 5ff233d..6a3b3c4 100644
--- a/src/mainboard/siemens/mc_tcu3/Kconfig
+++ b/src/mainboard/siemens/mc_tcu3/Kconfig
@@ -29,7 +29,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select SOC_INTEL_FSP_BAYTRAIL_MD
 	select USE_BLOBS
 	select CBFS_AUTOGEN_ATTRIBUTES
-	select FSP_BAYTRAIL_GFX_INIT
 	select USE_SIEMENS_HWILIB
 
 config MAINBOARD_DIR