[coreboot-gerrit] Patch set updated for coreboot: mainboard/intel: add leafhill board directory

Brenton Dong (brenton.m.dong@intel.com) gerrit at coreboot.org
Tue Jan 10 01:00:40 CET 2017


Brenton Dong (brenton.m.dong at intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/18038

-gerrit

commit 428bc7df2897aeecdd011d38aa1207511d3e4935
Author: Brenton Dong <brenton.m.dong at intel.com>
Date:   Wed Jan 4 15:12:27 2017 -0700

    mainboard/intel: add leafhill board directory
    
    This commit adds the initial scaffolding for the Intel Leafhill CRB
    with Apollo Lake silicon.
    
    The google/reef directory is used as a template. This commit only
    makes the minimum changes to Kconfig and Kconfig.name needed for
    the build bot to not have issues.
    
    Change-Id: I088edee0e94ecfb4666fa31e08dbcfd24a81891b
    Signed-off-by: Brenton Dong <brenton.m.dong at intel.com>
---
 src/mainboard/intel/leafhill/Kconfig               | 108 ++++++
 src/mainboard/intel/leafhill/Kconfig.name          |   4 +
 src/mainboard/intel/leafhill/Makefile.inc          |  19 +
 src/mainboard/intel/leafhill/acpi_tables.c         |  14 +
 src/mainboard/intel/leafhill/board_info.txt        |   6 +
 src/mainboard/intel/leafhill/boardid.c             |  29 ++
 src/mainboard/intel/leafhill/bootblock.c           |  32 ++
 src/mainboard/intel/leafhill/chromeos.c            |  51 +++
 src/mainboard/intel/leafhill/chromeos.fmd          |  53 +++
 src/mainboard/intel/leafhill/dsdt.asl              |  68 ++++
 src/mainboard/intel/leafhill/ec.c                  |  71 ++++
 src/mainboard/intel/leafhill/mainboard.c           | 123 +++++++
 src/mainboard/intel/leafhill/romstage.c            |  29 ++
 src/mainboard/intel/leafhill/smihandler.c          |  52 +++
 .../intel/leafhill/variants/baseboard/Makefile.inc |  10 +
 .../intel/leafhill/variants/baseboard/boardid.c    |  22 ++
 .../leafhill/variants/baseboard/devicetree.cb      | 235 +++++++++++++
 .../intel/leafhill/variants/baseboard/gpio.c       | 391 +++++++++++++++++++++
 .../baseboard/include/baseboard/acpi/dptf.asl      |  89 +++++
 .../variants/baseboard/include/baseboard/ec.h      |  76 ++++
 .../variants/baseboard/include/baseboard/gpio.h    |  53 +++
 .../baseboard/include/baseboard/variants.h         |  49 +++
 .../intel/leafhill/variants/baseboard/memory.c     | 155 ++++++++
 .../intel/leafhill/variants/baseboard/nhlt.c       |  44 +++
 .../intel/leafhill/variants/pyro/Makefile.inc      |   1 +
 .../intel/leafhill/variants/pyro/devicetree.cb     | 211 +++++++++++
 .../variants/pyro/include/variant/acpi/dptf.asl    |  89 +++++
 .../leafhill/variants/pyro/include/variant/ec.h    |  21 ++
 .../leafhill/variants/pyro/include/variant/gpio.h  |  21 ++
 .../intel/leafhill/variants/pyro/memory.c          | 114 ++++++
 .../variants/reef/include/variant/acpi/dptf.asl    |  16 +
 .../leafhill/variants/reef/include/variant/ec.h    |  21 ++
 .../leafhill/variants/reef/include/variant/gpio.h  |  21 ++
 .../intel/leafhill/variants/snappy/devicetree.cb   | 223 ++++++++++++
 .../variants/snappy/include/variant/acpi/dptf.asl  |  89 +++++
 .../leafhill/variants/snappy/include/variant/ec.h  |  21 ++
 .../variants/snappy/include/variant/gpio.h         |  21 ++
 37 files changed, 2652 insertions(+)

diff --git a/src/mainboard/intel/leafhill/Kconfig b/src/mainboard/intel/leafhill/Kconfig
new file mode 100644
index 0000000..30e1658
--- /dev/null
+++ b/src/mainboard/intel/leafhill/Kconfig
@@ -0,0 +1,108 @@
+
+config BOARD_GOOGLE_BASEBOARD_REEF
+	def_bool n
+	select SOC_INTEL_APOLLOLAKE
+	select BOARD_ROMSIZE_KB_16384
+	select EC_GOOGLE_CHROMEEC
+	select EC_GOOGLE_CHROMEEC_LPC
+	select HAVE_ACPI_RESUME
+	select HAVE_ACPI_TABLES
+	select I2C_TPM
+	select MAINBOARD_HAS_CHROMEOS
+	select MAINBOARD_HAS_TPM2
+	select MAINBOARD_HAS_I2C_TPM_CR50
+	select TPM2
+	select GOOGLE_SMBIOS_MAINBOARD_VERSION
+
+if BOARD_INTEL_LEAFHILL
+
+config BASEBOARD_REEF_LAPTOP
+	def_bool n
+	select SYSTEM_TYPE_LAPTOP
+
+config DRIVER_TPM_I2C_BUS
+	hex
+	default 0x2
+
+config DRIVER_TPM_I2C_ADDR
+	hex
+	default 0x50
+
+config DRIVER_TPM_I2C_IRQ
+	int
+	default 60 # GPE0_DW1_28
+
+config CHROMEOS
+	select EC_GOOGLE_CHROMEEC_SWITCHES
+	select HAS_RECOVERY_MRC_CACHE
+	select MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN
+	select LID_SWITCH if BASEBOARD_REEF_LAPTOP
+
+config DRIVERS_I2C_DA7219
+	default y
+
+config DRIVERS_I2C_GENERIC
+	default y
+
+config DRIVERS_I2C_WACOM
+	default y
+
+config DRIVERS_PS2_KEYBOARD
+	default y
+
+config DRIVERS_GENERIC_GPIO_REGULATOR
+	default y
+
+config MAINBOARD_DIR
+	string
+	default intel/leafhill
+
+config VARIANT_DIR
+	string
+	default "reef"
+	default "pyro" if BOARD_GOOGLE_PYRO
+	default "snappy" if BOARD_GOOGLE_SNAPPY
+
+config DEVICETREE
+	string
+	default "variants/pyro/devicetree.cb" if BOARD_GOOGLE_PYRO
+	default "variants/snappy/devicetree.cb" if BOARD_GOOGLE_SNAPPY
+	default "variants/baseboard/devicetree.cb"
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "Reef"
+	default "Pyro" if BOARD_GOOGLE_PYRO
+	default "Snappy" if BOARD_GOOGLE_SNAPPY
+
+config MAINBOARD_FAMILY
+	string
+	default "Google_Reef"
+
+config GBB_HWID
+	string
+	depends on CHROMEOS
+	default "REEF TEST 3240" if BOARD_GOOGLE_REEF
+	default "PYRO TEST 0290" if BOARD_GOOGLE_PYRO
+	default "SNAPPY TEST 1088" if BOARD_GOOGLE_SNAPPY
+
+config MAX_CPUS
+	int
+	default 8
+
+config UART_FOR_CONSOLE
+	int
+	default 2
+
+config INCLUDE_NHLT_BLOBS
+	bool "Include blobs for audio."
+	select NHLT_DMIC_1CH_16B
+	select NHLT_DMIC_2CH_16B
+	select NHLT_DMIC_4CH_16B
+	select NHLT_DA7219
+	select NHLT_MAX98357
+
+config DRIVERS_GENERIC_MAX98357A
+	default y
+
+endif # BOARD_INTEL_LEAFHILL
diff --git a/src/mainboard/intel/leafhill/Kconfig.name b/src/mainboard/intel/leafhill/Kconfig.name
new file mode 100644
index 0000000..d6d66e7
--- /dev/null
+++ b/src/mainboard/intel/leafhill/Kconfig.name
@@ -0,0 +1,4 @@
+config BOARD_INTEL_LEAFHILL
+	bool "Leafhill"
+	select BOARD_GOOGLE_BASEBOARD_REEF
+	select BASEBOARD_REEF_LAPTOP
diff --git a/src/mainboard/intel/leafhill/Makefile.inc b/src/mainboard/intel/leafhill/Makefile.inc
new file mode 100644
index 0000000..ac654fb
--- /dev/null
+++ b/src/mainboard/intel/leafhill/Makefile.inc
@@ -0,0 +1,19 @@
+bootblock-y += bootblock.c
+bootblock-y += ec.c
+
+romstage-$(CONFIG_CHROMEOS) += chromeos.c
+romstage-y += boardid.c
+
+ramstage-y += boardid.c
+ramstage-$(CONFIG_CHROMEOS) += chromeos.c
+ramstage-y += ec.c
+ramstage-y += mainboard.c
+
+verstage-$(CONFIG_CHROMEOS) += chromeos.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c
+
+subdirs-y += variants/baseboard
+CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/baseboard/include
+
+subdirs-y += variants/$(VARIANT_DIR)
+CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include
diff --git a/src/mainboard/intel/leafhill/acpi_tables.c b/src/mainboard/intel/leafhill/acpi_tables.c
new file mode 100644
index 0000000..8d4d1cf
--- /dev/null
+++ b/src/mainboard/intel/leafhill/acpi_tables.c
@@ -0,0 +1,14 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Blank file required by build system assumptions of this file being present.
+ */
diff --git a/src/mainboard/intel/leafhill/board_info.txt b/src/mainboard/intel/leafhill/board_info.txt
new file mode 100644
index 0000000..9b1f2a4
--- /dev/null
+++ b/src/mainboard/intel/leafhill/board_info.txt
@@ -0,0 +1,6 @@
+Vendor name: Google
+Board name: Reef Apollolake Reference Board
+Category: laptop
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/intel/leafhill/boardid.c b/src/mainboard/intel/leafhill/boardid.c
new file mode 100644
index 0000000..f240fca
--- /dev/null
+++ b/src/mainboard/intel/leafhill/boardid.c
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Google Inc.
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <boardid.h>
+#include <stddef.h>
+
+uint8_t board_id(void)
+{
+	MAYBE_STATIC int id = -1;
+
+	if (id < 0)
+		id = variant_board_id();
+
+	return id;
+}
diff --git a/src/mainboard/intel/leafhill/bootblock.c b/src/mainboard/intel/leafhill/bootblock.c
new file mode 100644
index 0000000..57d20d9
--- /dev/null
+++ b/src/mainboard/intel/leafhill/bootblock.c
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <bootblock_common.h>
+#include <ec/ec.h>
+#include <soc/lpc.h>
+#include <soc/gpio.h>
+#include <variant/ec.h>
+
+void bootblock_mainboard_init(void)
+{
+	const struct pad_config *pads;
+	size_t num;
+
+	lpc_configure_pads();
+	pads = variant_early_gpio_table(&num);
+	gpio_configure_pads(pads, num);
+	mainboard_ec_init();
+}
diff --git a/src/mainboard/intel/leafhill/chromeos.c b/src/mainboard/intel/leafhill/chromeos.c
new file mode 100644
index 0000000..256db16
--- /dev/null
+++ b/src/mainboard/intel/leafhill/chromeos.c
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <boot/coreboot_tables.h>
+#include <gpio.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+#include <soc/gpio.h>
+#include <variant/gpio.h>
+
+void fill_lb_gpios(struct lb_gpios *gpios)
+{
+	struct lb_gpio chromeos_gpios[] = {
+		{-1, ACTIVE_HIGH, get_write_protect_state(), "write protect"},
+		{-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
+		{-1, ACTIVE_HIGH, get_developer_mode_switch(), "developer"},
+		{-1, ACTIVE_HIGH, get_lid_switch(), "lid"},
+		{-1, ACTIVE_HIGH, 0, "power"},
+		{-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"},
+		{GPIO_EC_IN_RW, ACTIVE_HIGH,
+			gpio_get(GPIO_EC_IN_RW), "EC in RW"},
+	};
+	lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
+}
+
+int get_write_protect_state(void)
+{
+	/* Read PCH_WP GPIO. */
+	return gpio_get(GPIO_PCH_WP);
+}
+
+void mainboard_chromeos_acpi_generate(void)
+{
+	const struct cros_gpio *gpios;
+	size_t num;
+
+	gpios = variant_cros_gpios(&num);
+	chromeos_acpi_gpio_generate(gpios, num);
+}
diff --git a/src/mainboard/intel/leafhill/chromeos.fmd b/src/mainboard/intel/leafhill/chromeos.fmd
new file mode 100644
index 0000000..3c289a1
--- /dev/null
+++ b/src/mainboard/intel/leafhill/chromeos.fmd
@@ -0,0 +1,53 @@
+FLASH 16M {
+	WP_RO at 0x0 0x400000 {
+		SI_DESC at 0x0 0x1000
+		IFWI at 0x1000 0x1ff000
+		RO_VPD at 0x200000 0x4000
+		RO_SECTION at 0x204000 0x1fc000 {
+			FMAP at 0x0 0x800
+			RO_FRID at 0x800 0x40
+			RO_FRID_PAD at 0x840 0x7c0
+			COREBOOT(CBFS)@0x1000 0x17b000
+			GBB at 0x17c000 0x40000
+			RO_UNUSED at 0x1bc000 0x40000
+		}
+	}
+	MISC_RW at 0x400000 0x30000 {
+		UNIFIED_MRC_CACHE at 0x0 0x21000 {
+			RECOVERY_MRC_CACHE at 0x0 0x10000
+			RW_MRC_CACHE at 0x10000 0x10000
+			RW_VAR_MRC_CACHE at 0x20000 0x1000
+		}
+		RW_ELOG at 0x21000 0x3000
+		RW_SHARED at 0x24000 0x4000 {
+			SHARED_DATA at 0x0 0x2000
+			VBLOCK_DEV at 0x2000 0x2000
+		}
+		RW_VPD at 0x28000 0x2000
+		RW_NVRAM at 0x2a000 0x6000
+	}
+	RW_SECTION_A at 0x430000 0x480000 {
+		VBLOCK_A at 0x0 0x10000
+		FW_MAIN_A(CBFS)@0x10000 0x46ffc0
+		RW_FWID_A at 0x47ffc0 0x40
+	}
+	RW_SECTION_B at 0x8b0000 0x480000 {
+		VBLOCK_B at 0x0 0x10000
+		FW_MAIN_B(CBFS)@0x10000 0x46ffc0
+		RW_FWID_B at 0x47ffc0 0x40
+	}
+	RW_LEGACY(CBFS)@0xd30000 0x200000
+	BIOS_UNUSABLE at 0xf30000 0x4f000
+	DEVICE_EXTENSION at 0xf7f000 0x80000
+	# Currently, it is required that the BIOS region be a multiple of 8KiB.
+	# This is required so that the recovery mechanism can find SIGN_CSE
+	# region aligned to 4K at the center of BIOS region. Since the
+	# descriptor at the beginning uses 4K and BIOS starts at an offset of
+	# 4K, a hole of 4K is created towards the end of the flash to compensate
+	# for the size requirement of BIOS region.
+	# FIT tool thus creates descriptor with following regions:
+	# Descriptor --> 0 to 4K
+	# BIOS       --> 4K to 0xf7f000
+	# Device ext --> 0xf7f000 to 0xfff000
+	UNUSED_HOLE at 0xfff000 0x1000
+}
diff --git a/src/mainboard/intel/leafhill/dsdt.asl b/src/mainboard/intel/leafhill/dsdt.asl
new file mode 100644
index 0000000..dc63436
--- /dev/null
+++ b/src/mainboard/intel/leafhill/dsdt.asl
@@ -0,0 +1,68 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <variant/ec.h>
+#include <variant/gpio.h>
+
+DefinitionBlock(
+	"dsdt.aml",
+	"DSDT",
+	0x05,		// DSDT revision: ACPI v5.0
+	"COREv4",	// OEM id
+	"COREBOOT",	// OEM table id
+	0x20110725	// OEM revision
+)
+{
+	/* global NVS and variables */
+	#include <soc/intel/apollolake/acpi/globalnvs.asl>
+
+	/* CPU */
+	#include <soc/intel/apollolake/acpi/cpu.asl>
+
+	Scope (\_SB) {
+		Device (PCI0)
+		{
+			#include <soc/intel/apollolake/acpi/northbridge.asl>
+			#include <soc/intel/apollolake/acpi/southbridge.asl>
+			#include <soc/intel/apollolake/acpi/pch_hda.asl>
+		}
+	}
+
+	/* Chrome OS specific */
+	#include <vendorcode/google/chromeos/acpi/chromeos.asl>
+
+	/* Chipset specific sleep states */
+	#include <soc/intel/apollolake/acpi/sleepstates.asl>
+
+	/* Chrome OS Embedded Controller */
+	Scope (\_SB.PCI0.LPCB)
+	{
+		/* ACPI code for EC SuperIO functions */
+		#include <ec/google/chromeec/acpi/superio.asl>
+		/* ACPI code for EC functions */
+		#include <ec/google/chromeec/acpi/ec.asl>
+	}
+
+	/* Dynamic Platform Thermal Framework */
+	Scope (\_SB)
+	{
+		/* Per board variant specific definitions. */
+		#include <variant/acpi/dptf.asl>
+		/* Include soc specific DPTF changes */
+		#include <soc/intel/apollolake/acpi/dptf.asl>
+		/* Include common dptf ASL files */
+		#include <soc/intel/common/acpi/dptf/dptf.asl>
+	}
+}
diff --git a/src/mainboard/intel/leafhill/ec.c b/src/mainboard/intel/leafhill/ec.c
new file mode 100644
index 0000000..646216b
--- /dev/null
+++ b/src/mainboard/intel/leafhill/ec.c
@@ -0,0 +1,71 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpi.h>
+#include <console/console.h>
+#include <ec/ec.h>
+#include <ec/google/chromeec/ec.h>
+#include <rules.h>
+#include <soc/lpc.h>
+#include <variant/ec.h>
+
+static void ramstage_ec_init(void)
+{
+	printk(BIOS_ERR, "mainboard: EC init\n");
+
+	if (acpi_is_wakeup_s3()) {
+		google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS |
+					   MAINBOARD_EC_S3_WAKE_EVENTS);
+
+		/* Disable SMI and wake events */
+		google_chromeec_set_smi_mask(0);
+
+		/* Clear pending events */
+		while (google_chromeec_get_event() != 0)
+			;
+
+		/* Restore SCI event mask */
+		google_chromeec_set_sci_mask(MAINBOARD_EC_SCI_EVENTS);
+	} else {
+		google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS |
+					   MAINBOARD_EC_S5_WAKE_EVENTS);
+	}
+
+	/* Clear wake event mask */
+	google_chromeec_set_wake_mask(0);
+}
+
+static void bootblock_ec_init(void)
+{
+	uint16_t ec_ioport_base;
+	size_t ec_ioport_size;
+
+	/*
+	 * Set up LPC decoding for the ChromeEC I/O port ranges:
+	 * - Ports 62/66, 60/64, and 200->208
+	 * - ChromeEC specific communication I/O ports.
+	 */
+	lpc_enable_fixed_io_ranges(IOE_EC_62_66 | IOE_KBC_60_64 | IOE_LGE_200);
+	google_chromeec_ioport_range(&ec_ioport_base, &ec_ioport_size);
+	lpc_open_pmio_window(ec_ioport_base, ec_ioport_size);
+}
+
+void mainboard_ec_init(void)
+{
+	if (ENV_RAMSTAGE)
+		ramstage_ec_init();
+	else if (ENV_BOOTBLOCK)
+		bootblock_ec_init();
+}
diff --git a/src/mainboard/intel/leafhill/mainboard.c b/src/mainboard/intel/leafhill/mainboard.c
new file mode 100644
index 0000000..702269c
--- /dev/null
+++ b/src/mainboard/intel/leafhill/mainboard.c
@@ -0,0 +1,123 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpi.h>
+#include <baseboard/variants.h>
+#include <boardid.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <ec/ec.h>
+#include <gpio.h>
+#include <nhlt.h>
+#include <smbios.h>
+#include <soc/gpio.h>
+#include <soc/nhlt.h>
+#include <string.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+#include <variant/ec.h>
+#include <variant/gpio.h>
+
+static void mainboard_init(void *chip_info)
+{
+	int boardid;
+	const struct pad_config *pads;
+	size_t num;
+
+	boardid = board_id();
+	printk(BIOS_INFO, "Board ID: %d\n", boardid);
+
+	pads = variant_gpio_table(&num);
+	gpio_configure_pads(pads, num);
+
+	mainboard_ec_init();
+}
+
+/*
+ * There are 2 pins on reef-like boards that can be used for SKU'ing
+ * board differences. They each have optional stuffing for a pullup and
+ * a pulldown. This way we can generate 9 different values with the
+ * 2 pins.
+ */
+static int board_sku(void)
+{
+	static int board_sku_num = -1;
+	gpio_t board_sku_gpios[] = {
+		[1] = GPIO_17, [0] = GPIO_16,
+	};
+	const size_t num = ARRAY_SIZE(board_sku_gpios);
+
+	if (board_sku_num < 0)
+		board_sku_num = gpio_base3_value(board_sku_gpios, num);
+
+	return board_sku_num;
+}
+
+const char *smbios_mainboard_sku(void)
+{
+	static char sku_str[5]; /* sku[0-8] */
+
+	snprintf(sku_str, sizeof(sku_str), "sku%d", board_sku());
+
+	return sku_str;
+}
+
+void __attribute__((weak)) variant_nhlt_oem_overrides(const char **oem_id,
+						const char **oem_table_id,
+						uint32_t *oem_revision)
+{
+	*oem_id = "reef";
+	*oem_table_id = CONFIG_VARIANT_DIR;
+	*oem_revision = board_sku();
+}
+
+static unsigned long mainboard_write_acpi_tables(
+	device_t device, unsigned long current, acpi_rsdp_t *rsdp)
+{
+	uintptr_t start_addr;
+	uintptr_t end_addr;
+	struct nhlt *nhlt;
+	const char *oem_id = NULL;
+	const char *oem_table_id = NULL;
+	uint32_t oem_revision = 0;
+
+	start_addr = current;
+
+	nhlt = nhlt_init();
+
+	if (nhlt == NULL)
+		return start_addr;
+
+	variant_nhlt_init(nhlt);
+	variant_nhlt_oem_overrides(&oem_id, &oem_table_id, &oem_revision);
+
+	end_addr = nhlt_soc_serialize_oem_overrides(nhlt, start_addr,
+			oem_id, oem_table_id, oem_revision);
+
+	if (end_addr != start_addr)
+		acpi_add_table(rsdp, (void *)start_addr);
+
+	return end_addr;
+}
+
+static void mainboard_enable(device_t dev)
+{
+	dev->ops->write_acpi_tables = mainboard_write_acpi_tables;
+	dev->ops->acpi_inject_dsdt_generator = chromeos_dsdt_generator;
+}
+
+struct chip_operations mainboard_ops = {
+	.init = mainboard_init,
+	.enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/intel/leafhill/romstage.c b/src/mainboard/intel/leafhill/romstage.c
new file mode 100644
index 0000000..0e9917f
--- /dev/null
+++ b/src/mainboard/intel/leafhill/romstage.c
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <soc/meminit.h>
+#include <soc/romstage.h>
+
+void mainboard_memory_init_params(FSPM_UPD *memupd)
+{
+	meminit_lpddr4_by_sku(&memupd->FspmConfig,
+		variant_lpddr4_config(), variant_memory_sku());
+}
+
+void mainboard_save_dimm_info(void)
+{
+	save_lpddr4_dimm_info(variant_lpddr4_config(), variant_memory_sku());
+}
diff --git a/src/mainboard/intel/leafhill/smihandler.c b/src/mainboard/intel/leafhill/smihandler.c
new file mode 100644
index 0000000..fe4f8c4
--- /dev/null
+++ b/src/mainboard/intel/leafhill/smihandler.c
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2016 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpi.h>
+#include <baseboard/variants.h>
+#include <cpu/x86/smm.h>
+#include <ec/google/chromeec/smm.h>
+#include <soc/pm.h>
+#include <soc/smm.h>
+#include <soc/gpio.h>
+#include <variant/ec.h>
+#include <variant/gpio.h>
+
+void mainboard_smi_gpi_handler(const struct gpi_status *sts)
+{
+	if (gpi_status_get(sts, EC_SMI_GPI))
+		chromeec_smi_process_events();
+}
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+	const struct pad_config *pads;
+	size_t num;
+
+	pads = variant_sleep_gpio_table(&num);
+	gpio_configure_pads(pads, num);
+
+	if (IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC))
+		chromeec_smi_sleep(slp_typ, MAINBOARD_EC_S3_WAKE_EVENTS,
+					MAINBOARD_EC_S5_WAKE_EVENTS);
+}
+
+int mainboard_smi_apmc(u8 apmc)
+{
+	if (IS_ENABLED(CONFIG_EC_GOOGLE_CHROMEEC))
+		chromeec_smi_apmc(apmc, MAINBOARD_EC_SCI_EVENTS,
+					MAINBOARD_EC_SMI_EVENTS);
+	return 0;
+}
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/Makefile.inc b/src/mainboard/intel/leafhill/variants/baseboard/Makefile.inc
new file mode 100644
index 0000000..d2d344c
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/Makefile.inc
@@ -0,0 +1,10 @@
+bootblock-y += gpio.c
+
+romstage-y += boardid.c
+romstage-y += memory.c
+
+ramstage-y += boardid.c
+ramstage-y += gpio.c
+ramstage-y += nhlt.c
+
+smm-y += gpio.c
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/boardid.c b/src/mainboard/intel/leafhill/variants/baseboard/boardid.c
new file mode 100644
index 0000000..26f1588
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/boardid.c
@@ -0,0 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <ec/google/chromeec/ec.h>
+
+uint8_t __attribute__((weak)) variant_board_id(void)
+{
+	return google_chromeec_get_board_version();
+}
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/devicetree.cb b/src/mainboard/intel/leafhill/variants/baseboard/devicetree.cb
new file mode 100644
index 0000000..7db4f15
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/devicetree.cb
@@ -0,0 +1,235 @@
+chip soc/intel/apollolake
+
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+
+	register "pcie_rp0_clkreq_pin" = "0"    # wifi/bt
+	# Disable unused clkreq of PCIe root ports
+	register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED"
+
+	# GPIO for PERST_0
+	# If the Board has PERST_0 signal, assign the GPIO
+	# If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
+	register "prt0_gpio" = "GPIO_122"
+
+	# EMMC TX DATA Delay 1
+	# Refer to EDS-Vol2-22.3.
+	# [14:8] steps of delay for HS400, each 125ps.
+	# [6:0] steps of delay for SDR104/HS200, each 125ps.
+	register "emmc_tx_data_cntl1" = "0x0C16"
+
+	# EMMC TX DATA Delay 2
+	# Refer to EDS-Vol2-22.3.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_tx_data_cntl2" = "0x28162828"
+
+	# EMMC RX CMD/DATA Delay 1
+	# Refer to EDS-Vol2-22.3.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_rx_cmd_data_cntl1" = "0x00181717"
+
+	# EMMC RX CMD/DATA Delay 2
+	# Refer to EDS-Vol2-22.3.
+	# [17:16] stands for Rx Clock before Output Buffer
+	# [14:8] steps of delay for Auto Tuning Mode, each 125ps.
+	# [6:0] steps of delay for HS200, each 125ps.
+	register "emmc_rx_cmd_data_cntl2" = "0x10008"
+
+	# Enable DPTF
+	register "dptf_enable" = "1"
+
+	# PL1 override 12000 mW: the energy calculation is wrong with the
+	# current VR solution. Experiments show that SoC TDP max (6W) can
+	# be reached when RAPL PL1 is set to 12W.
+	register "tdp_pl1_override_mw" = "12000"
+	# Set RAPL PL2 to 15W.
+	register "tdp_pl2_override_mw" = "15000"
+
+	# Enable Audio Clock and Power gating
+	register "hdaudio_clk_gate_enable" = "1"
+	register "hdaudio_pwr_gate_enable" = "1"
+	register "hdaudio_bios_config_lockdown" = "1"
+
+	# Enable lpss s0ix
+	register "lpss_s0ix_enable" = "1"
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route, i.e., if this route changes then the affected GPE
+	# offset bits also need to be changed. This sets the PMC register
+	# GPE_CFG fields.
+	register "gpe0_dw1" = "PMC_GPE_N_31_0"
+	register "gpe0_dw2" = "PMC_GPE_N_63_32"
+	register "gpe0_dw3" = "PMC_GPE_SW_31_0"
+
+	# Enable I2C0 for audio codec at 400kHz
+	register "i2c[0]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 104,
+		.fall_time_ns = 52,
+	}"
+
+	# Enable I2C2 bus early for TPM at 400kHz
+	register "i2c[2]" = "{
+		.early_init = 1,
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 57,
+		.fall_time_ns = 28,
+	}"
+
+	# touchscreen at 400kHz
+	register "i2c[3]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 76,
+		.fall_time_ns = 164,
+	}"
+
+	# trackpad at 400kHz
+	register "i2c[4]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 114,
+		.fall_time_ns = 164,
+	}"
+
+	# digitizer at 400kHz
+	register "i2c[5]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 152,
+		.fall_time_ns = 30,
+	}"
+
+	# Minimum SLP S3 assertion width 28ms.
+	register "slp_s3_assertion_width_usecs" = "28000"
+
+	device domain 0 on
+		device pci 00.0 on  end	# - Host Bridge
+		device pci 00.1 on  end	# - DPTF
+		device pci 00.2 on  end	# - NPK
+		device pci 02.0 on  end	# - Gen
+		device pci 03.0 on  end	# - Iunit
+		device pci 0d.0 on  end	# - P2SB
+		device pci 0d.1 on  end	# - PMC
+		device pci 0d.2 on  end	# - SPI
+		device pci 0d.3 on  end	# - Shared SRAM
+		device pci 0e.0 on	# - Audio
+			chip drivers/generic/max98357a
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+		end
+		device pci 11.0 off end	# - ISH
+		device pci 12.0 off end	# - SATA
+		device pci 13.0 off end	# - Root Port 2 - PCIe-A 0
+		device pci 13.1 off end	# - Root Port 3 - PCIe-A 1
+		device pci 13.2 off end	# - Root Port 4 - PCIe-A 2
+		device pci 13.3 off end	# - Root Port 5 - PCIe-A 3
+		device pci 14.0 on
+			chip drivers/intel/wifi
+				register "wake" = "GPE0_DW3_00"
+				device pci 00.0 on end
+			end
+		end	# - Root Port 0 - PCIe-B 0 - Wifi
+		device pci 14.1 off end	# - Root Port 1 - PCIe-B 1
+		device pci 15.0 on  end	# - XHCI
+		device pci 15.1 off end # - XDCI
+		device pci 16.0 on	# - I2C 0
+			chip drivers/i2c/da7219
+				register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+				register "btn_cfg" = "50"
+				register "mic_det_thr" = "500"
+				register "jack_ins_deb" = "20"
+				register "jack_det_rate" = ""32ms_64ms""
+				register "jack_rem_deb" = "1"
+				register "a_d_btn_thr" = "0xa"
+				register "d_b_btn_thr" = "0x16"
+				register "b_c_btn_thr" = "0x21"
+				register "c_mic_btn_thr" = "0x3e"
+				register "btn_avg" = "4"
+				register "adc_1bit_rpt" = "1"
+				register "micbias_lvl" = "2600"
+				register "mic_amp_in_sel" = ""diff""
+				device i2c 1a on end
+			end
+		end
+		device pci 16.1 on  end	# - I2C 1
+		device pci 16.2 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+				device i2c 50 on end
+			end
+		end	# - I2C 2
+		device pci 16.3 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0001""
+				register "desc" = ""ELAN Touchscreen""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+				register "probed" = "1"
+				register "pwr_mgmt_type" = "GPIO_EXPORT"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
+
+				chip drivers/generic/gpio_regulator
+					register "name" = ""vcc33""
+					register "gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_152)"
+					register "enabled_on_boot" = "1"
+					device generic 0 on end
+				end
+
+				device i2c 10 on end
+			end
+		end	# - I2C 3
+		device pci 17.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+				register "wake" = "GPE0_DW1_15"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end # - I2C 4
+		device pci 17.1 on
+			chip drivers/i2c/wacom
+				register "generic" = "{
+					 .hid = WCOM50C1_HID,
+					 .cid = PNP0C50_CID,
+					 .desc = WCOM_DT_DESC,
+					 .irq = IRQ_LEVEL_LOW(GPIO_13_IRQ),
+				}"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0x9 on end
+			end
+		end	# - I2C 5
+		device pci 17.2 off end	# - I2C 6
+		device pci 17.3 off end	# - I2C 7
+		device pci 18.0 on  end	# - UART 0
+		device pci 18.1 on  end	# - UART 1
+		device pci 18.2 on  end	# - UART 2
+		device pci 18.3 off end	# - UART 3
+		device pci 19.0 on  end	# - SPI 0
+		device pci 19.1 off end	# - SPI 1
+		device pci 19.2 off end	# - SPI 2
+		device pci 1a.0 on  end	# - PWM
+		device pci 1b.0 on  end	# - SDCARD
+		device pci 1c.0 on  end	# - eMMC
+		device pci 1e.0 off end	# - SDIO
+		device pci 1f.0 on	# - LPC
+			chip ec/google/chromeec
+				device pnp 0c09.0 on end
+			end
+		end
+		device pci 1f.1 on  end	# - SMBUS
+	end
+end
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/gpio.c b/src/mainboard/intel/leafhill/variants/baseboard/gpio.c
new file mode 100644
index 0000000..d5e5917
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/gpio.c
@@ -0,0 +1,391 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+
+/*
+ * Pad configuration in ramstage. The order largely follows the 'GPIO Muxing'
+ * table found in EDS vol 1, but some pins aren't grouped functionally in
+ * the table so those were moved for more logical grouping.
+ */
+static const struct pad_config gpio_table[] = {
+	/* PCIE_WAKE[0:3]_N */
+	PAD_CFG_GPI_SCI_LOW(GPIO_205, UP_20K, DEEP, EDGE_SINGLE), /* WLAN */
+	PAD_CFG_GPI(GPIO_206, UP_20K, DEEP),	 /* Unused */
+	PAD_CFG_GPI(GPIO_207, UP_20K, DEEP),	 /* Unused */
+	PAD_CFG_GPI(GPIO_208, UP_20K, DEEP),	 /* Unused */
+
+	/* EMMC interface */
+	PAD_CFG_NF(GPIO_156, DN_20K, DEEP, NF1), /* EMMC_CLK */
+	PAD_CFG_NF(GPIO_157, UP_20K, DEEP, NF1), /* EMMC_D0 */
+	PAD_CFG_NF(GPIO_158, UP_20K, DEEP, NF1), /* EMMC_D1 */
+	PAD_CFG_NF(GPIO_159, UP_20K, DEEP, NF1), /* EMMC_D2 */
+	PAD_CFG_NF(GPIO_160, UP_20K, DEEP, NF1), /* EMMC_D3 */
+	PAD_CFG_NF(GPIO_161, UP_20K, DEEP, NF1), /* EMMC_D4 */
+	PAD_CFG_NF(GPIO_162, UP_20K, DEEP, NF1), /* EMMC_D5 */
+	PAD_CFG_NF(GPIO_163, UP_20K, DEEP, NF1), /* EMMC_D6 */
+	PAD_CFG_NF(GPIO_164, UP_20K, DEEP, NF1), /* EMMC_D7 */
+	PAD_CFG_NF(GPIO_165, UP_20K, DEEP, NF1), /* EMMC_CMD */
+	PAD_CFG_NF(GPIO_182, DN_20K, DEEP, NF1), /* EMMC_RCLK */
+
+	/* SDIO -- unused. */
+	PAD_CFG_GPI(GPIO_166, UP_20K, DEEP),	 /* SDIO_CLK */
+	PAD_CFG_GPI(GPIO_167, UP_20K, DEEP),	 /* SDIO_D0 */
+	/* Configure SDIO to enable power gating */
+	PAD_CFG_NF(GPIO_168, UP_20K, DEEP, NF1),	/* SDIO_D1 */
+	PAD_CFG_GPI(GPIO_169, UP_20K, DEEP),	 /* SDIO_D2 */
+	PAD_CFG_GPI(GPIO_170, UP_20K, DEEP),	 /* SDIO_D3 */
+	PAD_CFG_GPI(GPIO_171, UP_20K, DEEP),	 /* SDIO_CMD */
+
+	/* SDCARD */
+	/* Pull down clock by 20K */
+	PAD_CFG_NF(GPIO_172, DN_20K, DEEP, NF1), /* SDCARD_CLK */
+	PAD_CFG_NF(GPIO_173, UP_20K, DEEP, NF1), /* SDCARD_D0 */
+	PAD_CFG_NF(GPIO_174, UP_20K, DEEP, NF1), /* SDCARD_D1 */
+	PAD_CFG_NF(GPIO_175, UP_20K, DEEP, NF1), /* SDCARD_D2 */
+	PAD_CFG_NF(GPIO_176, UP_20K, DEEP, NF1), /* SDCARD_D3 */
+	/* Card detect is active LOW. Pull up by 20K */
+	PAD_CFG_NF(GPIO_177, UP_20K, DEEP, NF1), /* SDCARD_CD_N */
+	PAD_CFG_NF(GPIO_178, UP_20K, DEEP, NF1), /* SDCARD_CMD */
+	/* CLK feedback, internal signal, needs 20K pull down */
+	PAD_CFG_NF(GPIO_179, DN_20K, DEEP, NF1), /* SDCARD_CLK_FB */
+	/* No h/w write proect for uSD cards, pull down by 20K */
+	PAD_CFG_NF(GPIO_186, DN_20K, DEEP, NF1), /* SDCARD_LVL_WP */
+	/* EN_SD_SOCKET_PWR_L for SD slot power control. Default on. */
+	PAD_CFG_GPO(GPIO_183, 0, DEEP),		 /* SDIO_PWR_DOWN_N */
+
+	/* SMBus -- unused. */
+	PAD_CFG_GPI(SMB_ALERTB, UP_20K, DEEP),	 /* SMB_ALERT _N */
+	PAD_CFG_GPI(SMB_CLK, UP_20K, DEEP),	 /* SMB_CLK */
+	PAD_CFG_GPI(SMB_DATA, UP_20K, DEEP),	 /* SMB_DATA */
+
+	/* LPC */
+	PAD_CFG_NF(LPC_ILB_SERIRQ, UP_20K, DEEP, NF1), /* LPC_SERIRQ */
+	PAD_CFG_NF(LPC_CLKOUT0, NONE, DEEP, NF1), /* LPC_CLKOUT0 */
+	PAD_CFG_GPI(LPC_CLKOUT1, UP_20K, DEEP),	 /* LPC_CLKOUT1 -- unused */
+	PAD_CFG_NF(LPC_AD0, UP_20K, DEEP, NF1),	 /* LPC_AD0 */
+	PAD_CFG_NF(LPC_AD1, UP_20K, DEEP, NF1),	 /* LPC_AD1 */
+	PAD_CFG_NF(LPC_AD2, UP_20K, DEEP, NF1),	 /* LPC_AD2 */
+	PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1),	 /* LPC_AD3 */
+	PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1), /* LPC_CLKRUN_N */
+	PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1), /* LPC_FRAME_N */
+
+	/* I2C0 - Audio */
+	PAD_CFG_NF(GPIO_124, UP_2K, DEEP, NF1), /* LPSS_I2C0_SDA */
+	PAD_CFG_NF(GPIO_125, UP_2K, DEEP, NF1), /* LPSS_I2C0_SCL */
+
+	/* I2C1 - NFC with external pulls */
+	PAD_CFG_NF(GPIO_126, NONE, DEEP, NF1), /* LPSS_I2C1_SDA */
+	PAD_CFG_NF(GPIO_127, NONE, DEEP, NF1), /* LPSS_I2C1_SCL */
+
+	/* I2C2 - TPM  */
+	PAD_CFG_NF(GPIO_128, UP_2K, DEEP, NF1), /* LPSS_I2C2_SDA */
+	PAD_CFG_NF(GPIO_129, UP_2K, DEEP, NF1), /* LPSS_I2C2_SCL */
+
+	/* I2C3 - touch */
+	PAD_CFG_NF(GPIO_130, UP_2K, DEEP, NF1), /* LPSS_I2C3_SDA */
+	PAD_CFG_NF(GPIO_131, UP_2K, DEEP, NF1), /* LPSS_I2C3_SCL */
+
+	/* I2C4 - trackpad */
+	PAD_CFG_NF(GPIO_132, UP_2K, DEEP, NF1), /* LPSS_I2C4_SDA */
+	PAD_CFG_NF(GPIO_133, UP_2K, DEEP, NF1), /* LPSS_I2C4_SCL */
+
+	/* I2C5 -- pen with external pulls  */
+	PAD_CFG_NF(GPIO_134, NONE, DEEP, NF1), /* LPSS_I2C5_SDA */
+	PAD_CFG_NF(GPIO_135, NONE, DEEP, NF1), /* LPSS_I2C5_SCL */
+
+	/* I2C6-7 -- unused. */
+	PAD_CFG_GPI(GPIO_136, UP_20K, DEEP),	 /* LPSS_I2C6_SDA */
+	PAD_CFG_GPI(GPIO_137, UP_20K, DEEP),	 /* LPSS_I2C6_SCL */
+	PAD_CFG_GPI(GPIO_138, UP_20K, DEEP),	 /* LPSS_I2C7_SDA */
+	PAD_CFG_GPI(GPIO_139, UP_20K, DEEP),	 /* LPSS_I2C7_SCL */
+
+	/* Audio Amp - I2S6 */
+	PAD_CFG_NF(GPIO_146, NATIVE, DEEP, NF2), /* ISH_GPIO_0 - I2S6_BCLK */
+	PAD_CFG_NF(GPIO_147, NATIVE, DEEP, NF2), /* ISH_GPIO_1 - I2S6_WS_SYNC */
+	PAD_CFG_GPI(GPIO_148, UP_20K, DEEP),	 /* ISH_GPIO_2 - unused */
+	PAD_CFG_NF(GPIO_149, NATIVE, DEEP, NF2), /* ISH_GPIO_3 - I2S6_SDO */
+
+	/* NFC Reset */
+	PAD_CFG_GPO(GPIO_150, 1, DEEP),		 /* ISH_GPIO_4 */
+
+	PAD_CFG_GPI(GPIO_151, UP_20K, DEEP),	 /* ISH_GPIO_5 - unused */
+
+	/* Touch enable */
+	PAD_CFG_GPO(GPIO_152, 1, DEEP),		 /* ISH_GPIO_6 */
+
+	PAD_CFG_GPI(GPIO_153, UP_20K, DEEP),	 /* ISH_GPIO_7 - unused */
+	PAD_CFG_GPI(GPIO_154, UP_20K, DEEP),	 /* ISH_GPIO_8 - unused */
+	PAD_CFG_GPI(GPIO_155, UP_20K, DEEP),	 /* ISH_GPIO_9 - unused */
+
+	/* PCIE_CLKREQ[0:3]_N */
+	PAD_CFG_NF(GPIO_209, NONE, DEEP, NF1),	 /* WLAN with external pull */
+	PAD_CFG_GPI(GPIO_210, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI(GPIO_211, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI(GPIO_212, UP_20K, DEEP),	 /* unused */
+
+	/* OSC_CLK_OUT_[0:4] -- unused */
+	PAD_CFG_GPI(OSC_CLK_OUT_0, UP_20K, DEEP),
+	PAD_CFG_GPI(OSC_CLK_OUT_1, UP_20K, DEEP),
+	PAD_CFG_GPI(OSC_CLK_OUT_2, UP_20K, DEEP),
+	PAD_CFG_GPI(OSC_CLK_OUT_3, UP_20K, DEEP),
+	PAD_CFG_GPI(OSC_CLK_OUT_4, UP_20K, DEEP),
+
+	/* PMU Signals */
+	PAD_CFG_GPI(PMU_AC_PRESENT, UP_20K, DEEP), /* PMU_AC_PRESENT - unused */
+	PAD_CFG_NF(PMU_BATLOW_B, UP_20K, DEEP, NF1), /* PMU_BATLOW_N */
+	PAD_CFG_NF(PMU_PLTRST_B, NONE, DEEP, NF1), /* PMU_PLTRST_N */
+	PAD_CFG_NF(PMU_PWRBTN_B, UP_20K, DEEP, NF1), /* PMU_PWRBTN_N */
+	PAD_CFG_NF(PMU_RESETBUTTON_B, NONE, DEEP, NF1), /* PMU_RSTBTN_N */
+	PAD_CFG_NF_IOSSTATE(PMU_SLP_S0_B, NONE, DEEP, NF1, IGNORE), /* PMU_SLP_S0_N */
+	PAD_CFG_NF(PMU_SLP_S3_B, NONE, DEEP, NF1), /* PMU_SLP_S3_N */
+	PAD_CFG_NF(PMU_SLP_S4_B, NONE, DEEP, NF1), /* PMU_SLP_S4_N */
+	PAD_CFG_NF(PMU_SUSCLK, NONE, DEEP, NF1), /* PMU_SUSCLK */
+	PAD_CFG_GPO(PMU_WAKE_B, 1, DEEP),	 /* EN_PP3300_EMMC */
+	PAD_CFG_NF(SUS_STAT_B, NONE, DEEP, NF1), /* SUS_STAT_N */
+	PAD_CFG_NF(SUSPWRDNACK, NONE, DEEP, NF1), /* SUSPWRDNACK */
+
+	/* DDI[0:1] SDA and SCL -- unused */
+	PAD_CFG_GPI(GPIO_187, UP_20K, DEEP),	 /* HV_DDI0_DDC_SDA */
+	PAD_CFG_GPI(GPIO_188, UP_20K, DEEP),	 /* HV_DDI0_DDC_SCL */
+	PAD_CFG_GPI(GPIO_189, UP_20K, DEEP),	 /* HV_DDI1_DDC_SDA */
+	PAD_CFG_GPI(GPIO_190, UP_20K, DEEP),	 /* HV_DDI1_DDC_SCL */
+
+	/* MIPI I2C -- unused */
+	PAD_CFG_GPI(GPIO_191, UP_20K, DEEP),	 /* MIPI_I2C_SDA */
+	PAD_CFG_GPI(GPIO_192, UP_20K, DEEP),	 /* MIPI_I2C_SCL */
+
+	/* Panel 0 control */
+	PAD_CFG_NF(GPIO_193, NATIVE, DEEP, NF1), /* PNL0_VDDEN */
+	PAD_CFG_NF(GPIO_194, NATIVE, DEEP, NF1), /* PNL0_BKLTEN */
+	PAD_CFG_NF(GPIO_195, NATIVE, DEEP, NF1), /* PNL0_BKLTCTL */
+
+	/* Panel 1 control -- unused */
+	PAD_CFG_NF(GPIO_196, NATIVE, DEEP, NF1), /* PNL1_VDDEN */
+	PAD_CFG_NF(GPIO_197, NATIVE, DEEP, NF1), /* PNL1_BKLTEN */
+	PAD_CFG_NF(GPIO_198, NATIVE, DEEP, NF1), /* PNL1_BKLTCTL */
+
+	/* Hot plug detect. */
+	PAD_CFG_NF(GPIO_199, UP_20K, DEEP, NF2), /* HV_DDI1_HPD */
+	PAD_CFG_NF(GPIO_200, UP_20K, DEEP, NF2), /* HV_DDI0_HPD */
+
+	/* MDSI signals -- unused */
+	PAD_CFG_GPI(GPIO_201, UP_20K, DEEP),	 /* MDSI_A_TE */
+	PAD_CFG_GPI(GPIO_202, UP_20K, DEEP),	 /* MDSI_A_TE */
+
+	/* USB overcurrent pins. */
+	PAD_CFG_NF(GPIO_203, UP_20K, DEEP, NF1), /* USB_OC0_N */
+	PAD_CFG_NF(GPIO_204, UP_20K, DEEP, NF1), /* USB_OC1_N */
+
+	/* PMC SPI -- almost entirely unused */
+	PAD_CFG_GPI(PMC_SPI_FS0, UP_20K, DEEP),
+	PAD_CFG_NF(PMC_SPI_FS1, UP_20K, DEEP, NF2), /* HV_DDI2_HPD -- EDP HPD */
+	PAD_CFG_GPI(PMC_SPI_FS2, UP_20K, DEEP),
+	PAD_CFG_GPI(PMC_SPI_RXD, UP_20K, DEEP),
+	PAD_CFG_GPI(PMC_SPI_TXD, UP_20K, DEEP),
+	PAD_CFG_GPI(PMC_SPI_CLK, UP_20K, DEEP),
+
+	/* PMIC Signals Unused signals related to an old PMIC interface */
+	PAD_CFG_NF_IOSSTATE(PMIC_RESET_B, NATIVE, DEEP, NF1, IGNORE), /* PMIC_RESET_B */
+	PAD_CFG_GPI(GPIO_213, NONE, DEEP),	 /* unused external pull */
+	PAD_CFG_GPI(GPIO_214, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI(GPIO_215, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_NF(PMIC_THERMTRIP_B, UP_20K, DEEP, NF1), /* THERMTRIP_N */
+	PAD_CFG_GPI(PMIC_STDBY, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_NF(PROCHOT_B, UP_20K, DEEP, NF1), /* PROCHOT_N */
+	PAD_CFG_NF(PMIC_I2C_SCL, UP_1K, DEEP, NF1), /* PMIC_I2C_SCL */
+	PAD_CFG_NF(PMIC_I2C_SDA, UP_1K, DEEP, NF1), /* PMIC_I2C_SDA */
+
+	/* I2S1 -- largely unused */
+	PAD_CFG_GPI(GPIO_74, UP_20K, DEEP),	 /* I2S1_MCLK */
+	PAD_CFG_GPI(GPIO_75, UP_20K, DEEP),	 /* I2S1_BCLK -- PCH_WP */
+	PAD_CFG_GPO(GPIO_76, 0, DEEP),	/* I2S1_WS_SYNC -- SPK_PA_EN */
+	PAD_CFG_GPI(GPIO_77, UP_20K, DEEP),	 /* I2S1_SDI */
+	PAD_CFG_GPI(GPIO_78, UP_20K, DEEP),	 /* I2S1_SDO */
+
+	/* DMIC or I2S4 */
+	PAD_CFG_NF(GPIO_79, NATIVE, DEEP, NF1),	/* AVS_DMIC_CLK_A1 */
+	PAD_CFG_NF(GPIO_80, NATIVE, DEEP, NF1), /* AVS_DMIC_CLK_B1 */
+	PAD_CFG_NF(GPIO_81, NATIVE, DEEP, NF1),	/* AVS_DMIC_DATA_1 */
+	PAD_CFG_GPI(GPIO_82, DN_20K, DEEP),	 /* unused -- strap */
+	PAD_CFG_NF(GPIO_83, NATIVE, DEEP, NF1), /* AVS_DMIC_DATA_2 */
+
+	/* I2S2 -- Headset amp */
+	PAD_CFG_NF(GPIO_84, NATIVE, DEEP, NF1),	 /* AVS_I2S2_MCLK */
+	PAD_CFG_NF(GPIO_85, NATIVE, DEEP, NF1),	 /* AVS_I2S2_BCLK */
+	PAD_CFG_NF(GPIO_86, NATIVE, DEEP, NF1),	 /* AVS_I2S2_SW_SYNC */
+	PAD_CFG_NF(GPIO_87, NATIVE, DEEP, NF1),	 /* AVS_I2S2_SDI */
+	PAD_CFG_NF(GPIO_88, NATIVE, DEEP, NF1),	 /* AVS_I2S2_SDO */
+
+	/* I2S3 -- largely unused. */
+	PAD_CFG_GPI(GPIO_89, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI(GPIO_90, UP_20K, DEEP),	 /* GPS_HOST_WAKE */
+	PAD_CFG_GPO(GPIO_91, 1, DEEP),		 /* GPS_EN */
+	PAD_CFG_GPI(GPIO_92, DN_20K, DEEP),	 /* unused -- strap */
+
+	/* Fast SPI */
+	PAD_CFG_NF(GPIO_97, NATIVE, DEEP, NF1),	 /* FST_SPI_CS0_B */
+	PAD_CFG_GPI(GPIO_98, UP_20K, DEEP),	 /* FST_SPI_CS1_B -- unused */
+	PAD_CFG_NF(GPIO_99, NATIVE, DEEP, NF1),	 /* FST_SPI_MOSI_IO0 */
+	PAD_CFG_NF(GPIO_100, NATIVE, DEEP, NF1), /* FST_SPI_MISO_IO1 */
+	PAD_CFG_GPI(GPIO_101, UP_20K, DEEP),	 /* FST_IO2 -- MEM_CONFIG0 */
+	PAD_CFG_GPI(GPIO_102, UP_20K, DEEP),	 /* FST_IO3 -- MEM_CONFIG1 */
+	PAD_CFG_NF(GPIO_103, NATIVE, DEEP, NF1), /* FST_SPI_CLK */
+
+	/* SIO_SPI_0 - Used for FP */
+	PAD_CFG_NF(GPIO_104, NATIVE, DEEP, NF1), /* SIO_SPI_0_CLK */
+	PAD_CFG_NF(GPIO_105, NATIVE, DEEP, NF1), /* SIO_SPI_0_FS0 */
+	PAD_CFG_NF(GPIO_106, NATIVE, DEEP, NF3), /* FST_SPI_CS2_N */
+	PAD_CFG_NF(GPIO_109, NATIVE, DEEP, NF1), /* SIO_SPI_0_RXD */
+	PAD_CFG_NF(GPIO_110, NATIVE, DEEP, NF1), /* SIO_SPI_0_TXD */
+
+	/* SIO_SPI_1 -- largely unused */
+	PAD_CFG_GPI(GPIO_111, UP_20K, DEEP),	 /* SIO_SPI_1_CLK */
+	PAD_CFG_GPI(GPIO_112, UP_20K, DEEP),	 /* SIO_SPI_1_FS0 */
+	PAD_CFG_GPI(GPIO_113, UP_20K, DEEP),	 /* SIO_SPI_1_FS1 */
+	/* Headset interrupt */
+	PAD_CFG_GPI_APIC_LOW(GPIO_116, NONE, DEEP), /* SIO_SPI_1_RXD */
+	PAD_CFG_GPI(GPIO_117, UP_20K, DEEP),	 /* SIO_SPI_1_TXD */
+
+	/* SIO_SPI_2 -- unused */
+	PAD_CFG_GPI(GPIO_118, UP_20K, DEEP),	 /* SIO_SPI_2_CLK */
+	PAD_CFG_GPI(GPIO_119, UP_20K, DEEP),	 /* SIO_SPI_2_FS0 */
+	PAD_CFG_GPI(GPIO_120, UP_20K, DEEP),	 /* SIO_SPI_2_FS1 */
+	PAD_CFG_GPI(GPIO_121, UP_20K, DEEP),	 /* SIO_SPI_2_FS2 */
+	/* WLAN_PE_RST - default to deasserted. */
+	PAD_CFG_GPO(GPIO_122, 0, DEEP),		 /* SIO_SPI_2_RXD */
+	PAD_CFG_GPI(GPIO_123, UP_20K, DEEP),	 /* SIO_SPI_2_TXD */
+
+	/* Debug tracing. */
+	PAD_CFG_GPI(GPIO_0, UP_20K, DEEP),
+	PAD_CFG_GPI(GPIO_1, UP_20K, DEEP),
+	PAD_CFG_GPI(GPIO_2, UP_20K, DEEP),
+	PAD_CFG_GPI_SCI_HIGH(GPIO_3, DN_20K, DEEP, LEVEL),	 /* FP_INT */
+	PAD_CFG_GPI(GPIO_4, UP_20K, DEEP),
+	PAD_CFG_GPI(GPIO_5, UP_20K, DEEP),
+	PAD_CFG_GPI(GPIO_6, UP_20K, DEEP),
+	PAD_CFG_GPI(GPIO_7, UP_20K, DEEP),
+	PAD_CFG_GPI(GPIO_8, UP_20K, DEEP),
+
+	PAD_CFG_GPI_APIC_LOW(GPIO_9, NONE, DEEP), /* dTPM IRQ */
+	PAD_CFG_GPI(GPIO_10, DN_20K, DEEP),	 /* Board phase enforcement */
+	PAD_CFG_GPI_SCI_LOW(GPIO_11, NONE, DEEP, EDGE_SINGLE), /* EC SCI  */
+	PAD_CFG_GPI(GPIO_12, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI_APIC_LOW(GPIO_13, UP_20K, DEEP), /* PEN_INT_ODL */
+	PAD_CFG_GPI_APIC_HIGH(GPIO_14, DN_20K, DEEP), /* FP_INT */
+	PAD_CFG_GPI_SCI_LOW(GPIO_15, NONE, DEEP, EDGE_SINGLE),	 /* TRACKPAD_INT_1V8_ODL */
+	PAD_CFG_GPI(GPIO_16, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI(GPIO_17, UP_20K, DEEP),	 /* 1 vs 4 DMIC config */
+	PAD_CFG_GPI_APIC_LOW(GPIO_18, NONE, DEEP), /* Trackpad IRQ */
+	PAD_CFG_GPI(GPIO_19, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI_APIC_LOW(GPIO_20, UP_20K, DEEP), /* NFC IRQ */
+	PAD_CFG_GPI_APIC_LOW(GPIO_21, NONE, DEEP), /* Touch IRQ */
+	PAD_CFG_GPI_SCI_LOW(GPIO_22, NONE, DEEP, LEVEL), /* EC wake */
+	PAD_CFG_GPI(GPIO_23, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI(GPIO_24, UP_20K, DEEP),	 /* PEN_PDCT_ODL */
+	PAD_CFG_GPI(GPIO_25, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI(GPIO_26, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI(GPIO_27, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPI_APIC_LOW(GPIO_28, NONE, DEEP), /* TPM IRQ */
+	PAD_CFG_GPO(GPIO_29, 1, DEEP),		 /* FP reset */
+	PAD_CFG_GPI_APIC_LOW(GPIO_30, NONE, DEEP), /* KB IRQ */
+	PAD_CFG_GPO(GPIO_31, 0, DEEP),		 /* NFC FW DL */
+	PAD_CFG_NF(GPIO_32, NONE, DEEP, NF5),	 /* SUS_CLK2 */
+	PAD_CFG_GPI_APIC_LOW(GPIO_33, NONE, DEEP), /* PMIC IRQ */
+	PAD_CFG_GPI(GPIO_34, UP_20K, DEEP),	 /* unused */
+	PAD_CFG_GPO(GPIO_35, 0, DEEP),		 /* PEN_RESET - active high */
+	PAD_CFG_GPO(GPIO_36, 0, DEEP),		 /* touch reset */
+	PAD_CFG_GPI(GPIO_37, UP_20K, DEEP),	 /* unused */
+
+	/* LPSS_UART[0:2] */
+	PAD_CFG_GPI(GPIO_38, UP_20K, DEEP),	 /* LPSS_UART0_RXD - MEM_CONFIG2*/
+	/* Next 2 are straps. */
+	PAD_CFG_GPI(GPIO_39, DN_20K, DEEP),	 /* LPSS_UART0_TXD - unused */
+	PAD_CFG_GPI(GPIO_40, DN_20K, DEEP),	 /* LPSS_UART0_RTS - unused */
+	PAD_CFG_GPI(GPIO_41, NONE, DEEP),	 /* LPSS_UART0_CTS - EC_IN_RW */
+	PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1),	 /* LPSS_UART1_RXD */
+	PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1),	 /* LPSS_UART1_TXD */
+	PAD_CFG_GPO(GPIO_44, 1, DEEP),	 /* GPS_RST_ODL */
+	PAD_CFG_GPI(GPIO_45, UP_20K, DEEP),	 /* LPSS_UART1_CTS - MEM_CONFIG3 */
+	PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1),	 /* LPSS_UART2_RXD */
+	PAD_CFG_NF(GPIO_47, NATIVE, DEEP, NF1),	 /* LPSS_UART2_TXD */
+	PAD_CFG_GPI(GPIO_48, UP_20K, DEEP),	 /* LPSS_UART2_RTS - unused */
+	PAD_CFG_GPI_SMI_LOW(GPIO_49, NONE, DEEP, EDGE_SINGLE), /* LPSS_UART2_CTS - EC_SMI_L */
+
+	/* Camera interface -- completely unused. */
+	PAD_CFG_GPI(GPIO_62, UP_20K, DEEP),	 /* GP_CAMERASB00 */
+	PAD_CFG_GPI(GPIO_63, UP_20K, DEEP),	 /* GP_CAMERASB01 */
+	PAD_CFG_GPI(GPIO_64, UP_20K, DEEP),	 /* GP_CAMERASB02 */
+	PAD_CFG_GPI(GPIO_65, UP_20K, DEEP),	 /* GP_CAMERASB03 */
+	PAD_CFG_GPI(GPIO_66, UP_20K, DEEP),	 /* GP_CAMERASB04 */
+	PAD_CFG_GPI(GPIO_67, UP_20K, DEEP),	 /* GP_CAMERASB05 */
+	PAD_CFG_GPI(GPIO_68, UP_20K, DEEP),	 /* GP_CAMERASB06 */
+	PAD_CFG_GPI(GPIO_69, UP_20K, DEEP),	 /* GP_CAMERASB07 */
+	PAD_CFG_GPI(GPIO_70, UP_20K, DEEP),	 /* GP_CAMERASB08 */
+	PAD_CFG_GPI(GPIO_71, UP_20K, DEEP),	 /* GP_CAMERASB09 */
+	PAD_CFG_GPI(GPIO_72, UP_20K, DEEP),	 /* GP_CAMERASB10 */
+	PAD_CFG_GPI(GPIO_73, UP_20K, DEEP),	 /* GP_CAMERASB11 */
+};
+
+const struct pad_config * __attribute__((weak)) variant_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(gpio_table);
+	return gpio_table;
+}
+
+/* GPIOs needed prior to ramstage. */
+static const struct pad_config early_gpio_table[] = {
+	PAD_CFG_GPI(GPIO_75, UP_20K, DEEP),	 /* I2S1_BCLK -- PCH_WP */
+	/* I2C2 - TPM  */
+	PAD_CFG_NF(GPIO_128, UP_2K, DEEP, NF1), /* LPSS_I2C2_SDA */
+	PAD_CFG_NF(GPIO_129, UP_2K, DEEP, NF1), /* LPSS_I2C2_SCL */
+	PAD_CFG_GPI_APIC_LOW(GPIO_28, NONE, DEEP), /* TPM IRQ */
+	/* WLAN_PE_RST - default to deasserted just in case FSP misbehaves. */
+	PAD_CFG_GPO(GPIO_122, 0, DEEP),		 /* SIO_SPI_2_RXD */
+};
+
+const struct pad_config * __attribute__((weak))
+variant_early_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(early_gpio_table);
+	return early_gpio_table;
+}
+
+/* GPIO settings before entering sleep. */
+static const struct pad_config sleep_gpio_table[] = {
+	PAD_CFG_GPO(GPIO_150, 0, DEEP),		/* NFC_RESET_ODL */
+	PAD_CFG_GPI_APIC_LOW(GPIO_20, NONE, DEEP),	/* NFC_INT_L */
+};
+
+const struct pad_config * __attribute__((weak))
+variant_sleep_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(sleep_gpio_table);
+	return sleep_gpio_table;
+}
+
+static const struct cros_gpio cros_gpios[] = {
+	CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, GPIO_COMM_NW_NAME),
+	CROS_GPIO_WP_AH(PAD_NW(GPIO_PCH_WP), GPIO_COMM_NW_NAME),
+	CROS_GPIO_PE_AH(PAD_N(GPIO_SHIP_MODE), GPIO_COMM_N_NAME),
+};
+
+const struct cros_gpio * __attribute__((weak)) variant_cros_gpios(size_t *num)
+{
+	*num = ARRAY_SIZE(cros_gpios);
+	return cros_gpios;
+}
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/acpi/dptf.asl b/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/acpi/dptf.asl
new file mode 100644
index 0000000..87d3fa3
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/acpi/dptf.asl
@@ -0,0 +1,89 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DPTF_CPU_PASSIVE	95
+#define DPTF_CPU_CRITICAL	103
+#define DPTF_CPU_ACTIVE_AC0	90
+#define DPTF_CPU_ACTIVE_AC1	80
+#define DPTF_CPU_ACTIVE_AC2	70
+#define DPTF_CPU_ACTIVE_AC3	60
+#define DPTF_CPU_ACTIVE_AC4	50
+
+#define DPTF_TSR0_SENSOR_ID	0
+#define DPTF_TSR0_SENSOR_NAME	"Battery"
+#define DPTF_TSR0_PASSIVE	120
+#define DPTF_TSR0_CRITICAL	125
+
+#define DPTF_TSR1_SENSOR_ID	1
+#define DPTF_TSR1_SENSOR_NAME	"Ambient"
+#define DPTF_TSR1_PASSIVE	45
+#define DPTF_TSR1_CRITICAL	75
+
+#define DPTF_TSR2_SENSOR_ID	2
+#define DPTF_TSR2_SENSOR_NAME	"Charger"
+#define DPTF_TSR2_PASSIVE	55
+#define DPTF_TSR2_CRITICAL	90
+
+#define DPTF_ENABLE_CHARGER
+
+/* Charger performance states, board-specific values from charger and EC */
+Name (CHPS, Package () {
+	Package () { 0, 0, 0, 0, 255, 0xBB8, "mA", 0 },	/* 3A (MAX) */
+	Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 },	/* 1.5A */
+	Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 },	/* 1.0A */
+	Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 },	/* 0.5A */
+	Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 },	/* 0.0A */
+})
+
+Name (DTRT, Package () {
+	/* CPU Throttle Effect on CPU */
+	Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 100, 30, 0, 0, 0, 0 },
+
+	/* CPU Effect on Temp Sensor 0 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 100, 1200, 0, 0, 0, 0 },
+
+#ifdef DPTF_ENABLE_CHARGER
+	/* Charger Effect on Temp Sensor 2 */
+	Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR2, 200, 600, 0, 0, 0, 0 },
+#endif
+
+	/* CPU Effect on Temp Sensor 1 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR1, 100, 80, 0, 0, 0, 0 },
+
+	/* CPU Effect on Temp Sensor 2 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR2, 100, 1200, 0, 0, 0, 0 },
+})
+
+Name (MPPC, Package ()
+{
+	0x2,		/* Revision */
+	Package () {	/* Power Limit 1 */
+		0,	/* PowerLimitIndex, 0 for Power Limit 1 */
+		3000,	/* PowerLimitMinimum */
+		12000,	/* PowerLimitMaximum */
+		1000,	/* TimeWindowMinimum */
+		1000,	/* TimeWindowMaximum */
+		200	/* StepSize */
+	},
+	Package () {	/* Power Limit 2 */
+		1,	/* PowerLimitIndex, 1 for Power Limit 2 */
+		8000,	/* PowerLimitMinimum */
+		8000,	/* PowerLimitMaximum */
+		1000,	/* TimeWindowMinimum */
+		1000,	/* TimeWindowMaximum */
+		1000	/* StepSize */
+	}
+})
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/ec.h b/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/ec.h
new file mode 100644
index 0000000..87c127c
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/ec.h
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef BASEBOARD_EC_H
+#define BASEBOARD_EC_H
+
+#include <variant/gpio.h>
+#include <ec/google/chromeec/ec_commands.h>
+
+#define MAINBOARD_EC_SCI_EVENTS \
+	(EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED)        |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN)          |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED)      |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED)   |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW)       |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL)  |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY)           |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_STATUS)    |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_OVERLOAD)  |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_START)    |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_THROTTLE_STOP)     |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_CHARGER)       |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_MKBP)              |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU))
+
+#define MAINBOARD_EC_SMI_EVENTS \
+	(EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED))
+
+/* EC can wake from S5 with lid or power button */
+#define MAINBOARD_EC_S5_WAKE_EVENTS \
+	(EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN)     |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON))
+
+/* EC can wake from S3 with lid or power button or key press */
+#define MAINBOARD_EC_S3_WAKE_EVENTS \
+	(MAINBOARD_EC_S5_WAKE_EVENTS |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED))
+
+/* Log EC wake events plus EC shutdown events */
+#define MAINBOARD_EC_LOG_EVENTS \
+	(EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN)|\
+	 EC_HOST_EVENT_MASK(EC_HOST_EVENT_PANIC))
+
+/*
+ * ACPI related definitions for ASL code.
+ */
+
+/* Enable EC backed ALS device in ACPI */
+#define EC_ENABLE_ALS_DEVICE
+
+/* Enable EC backed PD MCU device in ACPI */
+#define EC_ENABLE_PD_MCU_DEVICE
+
+/* Enable LID switch and provide wake pin for EC */
+#define EC_ENABLE_LID_SWITCH
+#define EC_ENABLE_WAKE_PIN GPE_EC_WAKE
+
+#define SIO_EC_MEMMAP_ENABLE     /* EC Memory Map Resources */
+#define SIO_EC_HOST_ENABLE       /* EC Host Interface Resources */
+#define SIO_EC_ENABLE_PS2K       /* Enable PS/2 Keyboard */
+
+#endif
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/gpio.h b/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/gpio.h
new file mode 100644
index 0000000..1db7422
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/gpio.h
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef BASEBOARD_GPIO_H
+#define BASEBOARD_GPIO_H
+
+#include <soc/gpio.h>
+
+/*
+ * GPIO_11 for SCI is routed to GPE0_DW1 and maps to group GPIO_GPE_N_31_0
+ * which is North community
+ */
+#define EC_SCI_GPI	GPE0_DW1_11
+
+/* EC SMI */
+#define EC_SMI_GPI	GPIO_49
+
+/*
+ * On lidopen/lidclose GPIO_22 from North Community gets toggled and
+ * is used in _PRW to wake up device from sleep. GPIO_22 maps to
+ * group GPIO_GPE_N_31_0 and the pad is configured as SCI with
+ * EDGE_SINGLE and INVERT.
+ */
+#define GPE_EC_WAKE	GPE0_DW1_22
+
+/* Write Protect and indication if EC is in RW code. */
+#define GPIO_PCH_WP	GPIO_75
+#define GPIO_EC_IN_RW	GPIO_41
+/* Determine if board is in final shipping mode. */
+#define GPIO_SHIP_MODE	GPIO_10
+
+/*  Memory SKU GPIOs. */
+#define MEM_CONFIG3	GPIO_45
+#define MEM_CONFIG2	GPIO_38
+#define MEM_CONFIG1	GPIO_102
+#define MEM_CONFIG0	GPIO_101
+
+/* DMIC_CONFIG_PIN: High for 1-DMIC and low for 4-DMIC's */
+#define DMIC_CONFIG_PIN	GPIO_17
+
+#endif /* BASEBOARD_GPIO_H */
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/variants.h b/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/variants.h
new file mode 100644
index 0000000..65a32b3
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/include/baseboard/variants.h
@@ -0,0 +1,49 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef BASEBOARD_VARIANTS_H
+#define BASEBOARD_VARIANTS_H
+
+#include <soc/gpio.h>
+#include <soc/meminit.h>
+#include <stdint.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+
+/* Return the board id for the current variant board. */
+uint8_t variant_board_id(void);
+
+/* The next set of functions return the gpio table and fill in the number of
+ * entries for each table. */
+const struct pad_config *variant_gpio_table(size_t *num);
+const struct pad_config *variant_early_gpio_table(size_t *num);
+const struct pad_config *variant_sleep_gpio_table(size_t *num);
+
+/* Baseboard default swizzle. Can be reused if swizzle is same. */
+extern const struct lpddr4_swizzle_cfg baseboard_lpddr4_swizzle;
+/* Return LPDDR4 configuration structure. */
+const struct lpddr4_cfg *variant_lpddr4_config(void);
+/* Return memory SKU for the board. */
+size_t variant_memory_sku(void);
+
+/* Return ChromeOS gpio table and fill in number of entries. */
+const struct cros_gpio *variant_cros_gpios(size_t *num);
+
+/* Seed the NHLT tables with the board specific information. */
+struct nhlt;
+void variant_nhlt_oem_overrides(const char **oem_id,
+			const char **oem_table_id, uint32_t *oem_revision);
+void variant_nhlt_init(struct nhlt *nhlt);
+
+#endif /* BASEBOARD_VARIANTS_H */
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/memory.c b/src/mainboard/intel/leafhill/variants/baseboard/memory.c
new file mode 100644
index 0000000..50e93c7
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/memory.c
@@ -0,0 +1,155 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <gpio.h>
+#include <soc/meminit.h>
+#include <variant/gpio.h>
+
+const struct lpddr4_swizzle_cfg baseboard_lpddr4_swizzle = {
+	/* CH0_DQA[0:31] SoC pins -> U22 LPDDR4 module pins */
+	.phys[LP4_PHYS_CH0A] = {
+		/* DQA[0:7] pins of LPDDR4 module. */
+		.dqs[LP4_DQS0] = { 6, 7, 5, 4, 3, 1, 0, 2 },
+		/* DQA[8:15] pins of LPDDR4 module. */
+		.dqs[LP4_DQS1] = { 12, 10, 11, 13, 14, 8, 9, 15 },
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS2] = { 16, 22, 23, 20, 18, 17, 19, 21 },
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS3] = { 30, 28, 29, 25, 24, 26, 27, 31 },
+	},
+	.phys[LP4_PHYS_CH0B] = {
+		/* DQA[0:7] pins of LPDDR4 module. */
+		.dqs[LP4_DQS0] = { 7, 3, 5, 2, 6, 0, 1, 4 },
+		/* DQA[8:15] pins of LPDDR4 module. */
+		.dqs[LP4_DQS1] = { 9, 14, 12, 13, 10, 11, 8, 15 },
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS2] = { 20, 22, 23, 16, 19, 17, 18, 21 },
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS3] = { 28, 24, 26, 27, 29, 30, 31, 25 },
+	},
+	.phys[LP4_PHYS_CH1A] = {
+		/* DQA[0:7] pins of LPDDR4 module. */
+		.dqs[LP4_DQS0] = { 2, 1, 6, 7, 5, 4, 3, 0 },
+		/* DQA[8:15] pins of LPDDR4 module. */
+		.dqs[LP4_DQS1] = { 11, 10, 8, 9, 12, 15, 13, 14 },
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS2] = { 17, 23, 19, 16, 21, 22, 20, 18 },
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS3] = { 31, 29, 26, 25, 28, 27, 24, 30 },
+	},
+	.phys[LP4_PHYS_CH1B] = {
+		/* DQA[0:7] pins of LPDDR4 module. */
+		.dqs[LP4_DQS0] = { 4, 3, 7, 5, 6, 1, 0, 2 },
+		/* DQA[8:15] pins of LPDDR4 module. */
+		.dqs[LP4_DQS1] = { 15, 9, 8, 11, 14, 13, 12, 10 },
+		/* DQB[0:7] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS2] = { 20, 23, 22, 21, 18, 19, 16, 17 },
+		/* DQB[7:15] pins of LPDDR4 module with offset of 16. */
+		.dqs[LP4_DQS3] = { 25, 28, 30, 31, 26, 27, 24, 29 },
+	},
+};
+
+/*
+ * The strings in the part_num field aren't necessarily the exact part
+ * numbers used in all the designs. The reason is that the mosys userland
+ * tool uses these strings for dumping more information. Different speed bins
+ * could change in future systems, but the strings still need to match.
+ */
+static const struct lpddr4_sku skus[] = {
+	/*
+	 * K4F6E304HB-MG - both logical channels While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate
+	 * the deneisty as 8Gb per rank.
+	 */
+	[0] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "K4F6E304HB-MGCJ",
+	},
+	/* K4F8E304HB-MG - both logical channels  */
+	[1] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "K4F8E304HB-MGCJ",
+	},
+	/*
+	 * MT53B512M32D2NP - both logical channels. While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate
+	 * the deneisty as 8Gb per rank.
+	 */
+	[2] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "MT53B512M32D2NP",
+	},
+	/* MT53B256M32D1NP - both logical channels */
+	[3] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "MT53B256M32D1NP",
+	},
+	/*
+	 * H9HCNNNBPUMLHR - both logical channels. While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate the
+	 * density as 8Gb per rank.
+	 */
+	[4] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "H9HCNNNBPUMLHR",
+	},
+	/* H9HCNNN8KUMLHR - both logical channels */
+	[5] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "H9HCNNN8KUMLHR",
+	},
+};
+
+static const struct lpddr4_cfg lp4cfg = {
+	.skus = skus,
+	.num_skus = ARRAY_SIZE(skus),
+	.swizzle_config = &baseboard_lpddr4_swizzle,
+};
+
+const struct lpddr4_cfg * __attribute__((weak)) variant_lpddr4_config(void)
+{
+	return &lp4cfg;
+}
+
+size_t __attribute__((weak)) variant_memory_sku(void)
+{
+	gpio_t pads[] = {
+		[3] = MEM_CONFIG3, [2] = MEM_CONFIG2,
+		[1] = MEM_CONFIG1, [0] = MEM_CONFIG0,
+	};
+
+	/* Need internal pullups enabled as only pulldown stuffing options
+	 * exist. */
+	return gpio_pullup_base2_value(pads, ARRAY_SIZE(pads));
+}
diff --git a/src/mainboard/intel/leafhill/variants/baseboard/nhlt.c b/src/mainboard/intel/leafhill/variants/baseboard/nhlt.c
new file mode 100644
index 0000000..d44d599
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/baseboard/nhlt.c
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <console/console.h>
+#include <nhlt.h>
+#include <soc/nhlt.h>
+#include <gpio.h>
+#include <baseboard/gpio.h>
+
+void __attribute__((weak)) variant_nhlt_init(struct nhlt *nhlt)
+{
+	/* 1-dmic configuration */
+	if (!nhlt_soc_add_dmic_array(nhlt, 1))
+		printk(BIOS_ERR, "Added 1CH DMIC array.\n");
+	/* 2-dmic configuration */
+	if (!nhlt_soc_add_dmic_array(nhlt, 2))
+		printk(BIOS_ERR, "Added 2CH DMIC array.\n");
+	/* 4-dmic configuration */
+	if (!nhlt_soc_add_dmic_array(nhlt, 4))
+		printk(BIOS_ERR, "Added 4CH DMIC array.\n");
+	/* Dialog for Headset codec.
+	 * Headset codec is bi-directional but uses the same configuration
+	 * settings for render and capture endpoints.
+	 */
+	if (!nhlt_soc_add_da7219(nhlt, AUDIO_LINK_SSP1))
+		printk(BIOS_ERR, "Added Dialog_7219 codec.\n");
+
+	/* MAXIM Smart Amps for left and right speakers. */
+	if (!nhlt_soc_add_max98357(nhlt, AUDIO_LINK_SSP5))
+		printk(BIOS_ERR, "Added Maxim_98357 codec.\n");
+}
diff --git a/src/mainboard/intel/leafhill/variants/pyro/Makefile.inc b/src/mainboard/intel/leafhill/variants/pyro/Makefile.inc
new file mode 100644
index 0000000..fd45b94
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/pyro/Makefile.inc
@@ -0,0 +1 @@
+romstage-y += memory.c
diff --git a/src/mainboard/intel/leafhill/variants/pyro/devicetree.cb b/src/mainboard/intel/leafhill/variants/pyro/devicetree.cb
new file mode 100644
index 0000000..bc06bbb
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/pyro/devicetree.cb
@@ -0,0 +1,211 @@
+chip soc/intel/apollolake
+
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+
+	register "pcie_rp0_clkreq_pin" = "0"    # wifi/bt
+	# Disable unused clkreq of PCIe root ports
+	register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED"
+
+	# GPIO for PERST_0
+	# If the Board has PERST_0 signal, assign the GPIO
+	# If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
+	register "prt0_gpio" = "GPIO_122"
+
+	# EMMC TX DATA Delay 1
+	# Refer to EDS-Vol2-22.3.
+	# [14:8] steps of delay for HS400, each 125ps.
+	# [6:0] steps of delay for SDR104/HS200, each 125ps.
+	register "emmc_tx_data_cntl1" = "0x0C16"
+
+	# EMMC TX DATA Delay 2
+	# Refer to EDS-Vol2-22.3.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_tx_data_cntl2" = "0x28162828"
+
+	# EMMC RX CMD/DATA Delay 1
+	# Refer to EDS-Vol2-22.3.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_rx_cmd_data_cntl1" = "0x00181717"
+
+	# EMMC RX CMD/DATA Delay 2
+	# Refer to EDS-Vol2-22.3.
+	# [17:16] stands for Rx Clock before Output Buffer
+	# [14:8] steps of delay for Auto Tuning Mode, each 125ps.
+	# [6:0] steps of delay for HS200, each 125ps.
+	register "emmc_rx_cmd_data_cntl2" = "0x10008"
+
+	# Enable DPTF
+	register "dptf_enable" = "1"
+
+	# PL1 override 12000 mW: the energy calculation is wrong with the
+	# current VR solution. Experiments show that SoC TDP max (6W) can
+	# be reached when RAPL PL1 is set to 12W.
+	register "tdp_pl1_override_mw" = "12000"
+	# Set RAPL PL2 to 15W.
+	register "tdp_pl2_override_mw" = "15000"
+
+	# Enable Audio Clock and Power gating
+	register "hdaudio_clk_gate_enable" = "1"
+	register "hdaudio_pwr_gate_enable" = "1"
+	register "hdaudio_bios_config_lockdown" = "1"
+
+	# Enable lpss s0ix
+	register "lpss_s0ix_enable" = "1"
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route, i.e., if this route changes then the affected GPE
+	# offset bits also need to be changed. This sets the PMC register
+	# GPE_CFG fields.
+	register "gpe0_dw1" = "PMC_GPE_N_31_0"
+	register "gpe0_dw2" = "PMC_GPE_N_63_32"
+	register "gpe0_dw3" = "PMC_GPE_SW_31_0"
+
+	# Enable I2C0 for audio codec at 400kHz
+	register "i2c[0]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 104,
+		.fall_time_ns = 52,
+	}"
+
+	# Enable I2C2 bus early for TPM at 400kHz
+	register "i2c[2]" = "{
+		.early_init = 1,
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 50,
+		.fall_time_ns = 23,
+	}"
+
+	# touchscreen at 400kHz
+	register "i2c[3]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 76,
+		.fall_time_ns = 164,
+	}"
+
+	# trackpad at 400kHz
+	register "i2c[4]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 90,
+		.fall_time_ns = 164,
+	}"
+
+	# Minimum SLP S3 assertion width 28ms.
+	register "slp_s3_assertion_width_usecs" = "28000"
+
+	device domain 0 on
+		device pci 00.0 on  end	# - Host Bridge
+		device pci 00.1 on  end	# - DPTF
+		device pci 00.2 on  end	# - NPK
+		device pci 02.0 on  end	# - Gen
+		device pci 03.0 on  end	# - Iunit
+		device pci 0d.0 on  end	# - P2SB
+		device pci 0d.1 on  end	# - PMC
+		device pci 0d.2 on  end	# - SPI
+		device pci 0d.3 on  end	# - Shared SRAM
+		device pci 0e.0 on	# - Audio
+			chip drivers/generic/max98357a
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+		end
+		device pci 11.0 off end	# - ISH
+		device pci 12.0 off end	# - SATA
+		device pci 13.0 off end	# - Root Port 2 - PCIe-A 0
+		device pci 13.1 off end	# - Root Port 3 - PCIe-A 1
+		device pci 13.2 off end	# - Root Port 4 - PCIe-A 2
+		device pci 13.3 off end	# - Root Port 5 - PCIe-A 3
+		device pci 14.0 on
+			chip drivers/intel/wifi
+				register "wake" = "GPE0_DW3_00"
+				device pci 00.0 on end
+			end
+		end	# - Root Port 0 - PCIe-B 0 - Wifi
+		device pci 14.1 off end	# - Root Port 1 - PCIe-B 1
+		device pci 15.0 on  end	# - XHCI
+		device pci 15.1 off end # - XDCI
+		device pci 16.0 on	# - I2C 0
+			chip drivers/i2c/da7219
+				register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+				register "btn_cfg" = "50"
+				register "mic_det_thr" = "500"
+				register "jack_ins_deb" = "20"
+				register "jack_det_rate" = ""32ms_64ms""
+				register "jack_rem_deb" = "1"
+				register "a_d_btn_thr" = "0xa"
+				register "d_b_btn_thr" = "0x16"
+				register "b_c_btn_thr" = "0x21"
+				register "c_mic_btn_thr" = "0x3e"
+				register "btn_avg" = "4"
+				register "adc_1bit_rpt" = "1"
+				register "micbias_lvl" = "2600"
+				register "mic_amp_in_sel" = ""diff""
+				device i2c 1a on end
+			end
+		end
+		device pci 16.1 on  end	# - I2C 1
+		device pci 16.2 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+				device i2c 50 on end
+			end
+		end	# - I2C 2
+		device pci 16.3 on
+			chip drivers/i2c/wacom
+				register "generic" = "{
+					 .hid = WCOMNTN2_HID,
+					 .cid = PNP0C50_CID,
+					 .desc = WCOM_TS_DESC,
+					 .irq = IRQ_EDGE_LOW(GPIO_21_IRQ),
+					 .probed = 1,
+				}"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0xA on end
+			end
+		end	# - I2C 3
+		device pci 17.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+				register "wake" = "GPE0_DW1_15"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end # - I2C 4
+		device pci 17.1 off end	# - I2C 5
+		device pci 17.2 off end	# - I2C 6
+		device pci 17.3 off end	# - I2C 7
+		device pci 18.0 on  end	# - UART 0
+		device pci 18.1 on  end	# - UART 1
+		device pci 18.2 on  end	# - UART 2
+		device pci 18.3 off end	# - UART 3
+		device pci 19.0 on  end	# - SPI 0
+		device pci 19.1 off end	# - SPI 1
+		device pci 19.2 off end	# - SPI 2
+		device pci 1a.0 on  end	# - PWM
+		device pci 1b.0 on  end	# - SDCARD
+		device pci 1c.0 on  end	# - eMMC
+		device pci 1e.0 off end	# - SDIO
+		device pci 1f.0 on	# - LPC
+			chip ec/google/chromeec
+				device pnp 0c09.0 on end
+			end
+		end
+		device pci 1f.1 on  end	# - SMBUS
+	end
+end
diff --git a/src/mainboard/intel/leafhill/variants/pyro/include/variant/acpi/dptf.asl b/src/mainboard/intel/leafhill/variants/pyro/include/variant/acpi/dptf.asl
new file mode 100644
index 0000000..f14999c
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/pyro/include/variant/acpi/dptf.asl
@@ -0,0 +1,89 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DPTF_CPU_PASSIVE	57
+#define DPTF_CPU_CRITICAL	90
+#define DPTF_CPU_ACTIVE_AC0	90
+#define DPTF_CPU_ACTIVE_AC1	80
+#define DPTF_CPU_ACTIVE_AC2	70
+#define DPTF_CPU_ACTIVE_AC3	60
+#define DPTF_CPU_ACTIVE_AC4	50
+
+#define DPTF_TSR0_SENSOR_ID	0
+#define DPTF_TSR0_SENSOR_NAME	"Battery"
+#define DPTF_TSR0_PASSIVE	48
+#define DPTF_TSR0_CRITICAL	70
+
+#define DPTF_TSR1_SENSOR_ID	1
+#define DPTF_TSR1_SENSOR_NAME	"Ambient"
+#define DPTF_TSR1_PASSIVE	55
+#define DPTF_TSR1_CRITICAL	70
+
+#define DPTF_TSR2_SENSOR_ID	2
+#define DPTF_TSR2_SENSOR_NAME	"Charger"
+#define DPTF_TSR2_PASSIVE	65
+#define DPTF_TSR2_CRITICAL	80
+
+#define DPTF_ENABLE_CHARGER
+
+/* Charger performance states, board-specific values from charger and EC */
+Name (CHPS, Package () {
+	Package () { 0, 0, 0, 0, 255, 0xBB8, "mA", 0 },	/* 3A (MAX) */
+	Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 },	/* 1.5A */
+	Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 },	/* 1.0A */
+	Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 },	/* 0.5A */
+	Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 },	/* 0.0A */
+})
+
+Name (DTRT, Package () {
+	/* CPU Throttle Effect on CPU */
+	Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 100, 50, 0, 0, 0, 0 },
+
+	/* CPU Effect on Temp Sensor 0 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 100, 500, 0, 0, 0, 0 },
+
+#ifdef DPTF_ENABLE_CHARGER
+	/* Charger Effect on Temp Sensor 1 */
+	Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR1, 200, 600, 0, 0, 0, 0 },
+#endif
+
+	/* CPU Effect on Temp Sensor 1 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR1, 100, 550, 0, 0, 0, 0 },
+
+	/* CPU Effect on Temp Sensor 2 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR2, 100, 1200, 0, 0, 0, 0 },
+})
+
+Name (MPPC, Package ()
+{
+	0x2,		/* Revision */
+	Package () {	/* Power Limit 1 */
+		0,	/* PowerLimitIndex, 0 for Power Limit 1 */
+		1600,	/* PowerLimitMinimum */
+		12000,	/* PowerLimitMaximum */
+		1000,	/* TimeWindowMinimum */
+		1000,	/* TimeWindowMaximum */
+		200	/* StepSize */
+	},
+	Package () {	/* Power Limit 2 */
+		1,	/* PowerLimitIndex, 1 for Power Limit 2 */
+		6000,	/* PowerLimitMinimum */
+		15000,	/* PowerLimitMaximum */
+		1000,	/* TimeWindowMinimum */
+		1000,	/* TimeWindowMaximum */
+		1000	/* StepSize */
+	}
+})
diff --git a/src/mainboard/intel/leafhill/variants/pyro/include/variant/ec.h b/src/mainboard/intel/leafhill/variants/pyro/include/variant/ec.h
new file mode 100644
index 0000000..586f106
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/pyro/include/variant/ec.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_EC_H
+#define MAINBOARD_EC_H
+
+#include <baseboard/ec.h>
+
+#endif
diff --git a/src/mainboard/intel/leafhill/variants/pyro/include/variant/gpio.h b/src/mainboard/intel/leafhill/variants/pyro/include/variant/gpio.h
new file mode 100644
index 0000000..6d1ce5a
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/pyro/include/variant/gpio.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_GPIO_H
+#define MAINBOARD_GPIO_H
+
+#include <baseboard/gpio.h>
+
+#endif /* MAINBOARD_GPIO_H */
diff --git a/src/mainboard/intel/leafhill/variants/pyro/memory.c b/src/mainboard/intel/leafhill/variants/pyro/memory.c
new file mode 100644
index 0000000..71ee060
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/pyro/memory.c
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/variants.h>
+#include <gpio.h>
+#include <soc/meminit.h>
+#include <variant/gpio.h>
+
+
+static const struct lpddr4_sku skus[] = {
+	/*
+	 * K4F6E304HB-MGCJ - both logical channels While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate
+	 * the deneisty as 8Gb per rank.
+	 */
+	[0] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "K4F6E304HB-MGCJ",
+	},
+	/* K4F8E304HB-MGCJ - both logical channels  */
+	[1] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "K4F8E304HB-MGCJ",
+	},
+	/*
+	 * MT53B512M32D2NP-062WT:C - both logical channels. While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate
+	 * the deneisty as 8Gb per rank.
+	 */
+	[2] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "MT53B512M32D2NP",
+		.disable_periodic_retraining = 1,
+	},
+	/* MT53B256M32D1NP-062 WT:C - both logical channels */
+	[3] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "MT53B256M32D1NP",
+		.disable_periodic_retraining = 1,
+	},
+	/*
+	 * H9HCNNNBPUMLHR-NLE - both logical channels. While the parts
+	 * are listed at 16Gb there are 2 ranks per channel so indicate the
+	 * density as 8Gb per rank.
+	 */
+	[4] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "H9HCNNNBPUMLHR",
+	},
+	/* H9HCNNN8KUMLHR-NLE - both logical channels */
+	[5] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.part_num = "H9HCNNN8KUMLHR",
+	},
+	/* Samsung 290 K4F6E304HB-MGCH 16Gb dual-ch */
+	[0xe] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 1,
+		.ch1_dual_rank = 1,
+		.part_num = "K4F6E304HB-MGCH",
+	},
+	/* Samsung 280 K4F8E304HB-MGCH 8Gb dual-ch */
+	[0xf] = {
+		.speed = LP4_SPEED_2400,
+		.ch0_rank_density = LP4_8Gb_DENSITY,
+		.ch1_rank_density = LP4_8Gb_DENSITY,
+		.ch0_dual_rank = 0,
+		.ch1_dual_rank = 0,
+		.part_num = "K4F8E304HB-MGCH",
+	},
+};
+
+static const struct lpddr4_cfg lp4cfg = {
+	.skus = skus,
+	.num_skus = ARRAY_SIZE(skus),
+	.swizzle_config = &baseboard_lpddr4_swizzle,
+};
+
+const struct lpddr4_cfg *variant_lpddr4_config(void)
+{
+	return &lp4cfg;
+}
diff --git a/src/mainboard/intel/leafhill/variants/reef/include/variant/acpi/dptf.asl b/src/mainboard/intel/leafhill/variants/reef/include/variant/acpi/dptf.asl
new file mode 100644
index 0000000..f3ff04b
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/reef/include/variant/acpi/dptf.asl
@@ -0,0 +1,16 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <baseboard/acpi/dptf.asl>
diff --git a/src/mainboard/intel/leafhill/variants/reef/include/variant/ec.h b/src/mainboard/intel/leafhill/variants/reef/include/variant/ec.h
new file mode 100644
index 0000000..586f106
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/reef/include/variant/ec.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_EC_H
+#define MAINBOARD_EC_H
+
+#include <baseboard/ec.h>
+
+#endif
diff --git a/src/mainboard/intel/leafhill/variants/reef/include/variant/gpio.h b/src/mainboard/intel/leafhill/variants/reef/include/variant/gpio.h
new file mode 100644
index 0000000..6d1ce5a
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/reef/include/variant/gpio.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_GPIO_H
+#define MAINBOARD_GPIO_H
+
+#include <baseboard/gpio.h>
+
+#endif /* MAINBOARD_GPIO_H */
diff --git a/src/mainboard/intel/leafhill/variants/snappy/devicetree.cb b/src/mainboard/intel/leafhill/variants/snappy/devicetree.cb
new file mode 100644
index 0000000..e46483e
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/snappy/devicetree.cb
@@ -0,0 +1,223 @@
+chip soc/intel/apollolake
+
+	device cpu_cluster 0 on
+		device lapic 0 on end
+	end
+
+	register "pcie_rp0_clkreq_pin" = "0"    # wifi/bt
+	# Disable unused clkreq of PCIe root ports
+	register "pcie_rp1_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp2_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp3_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp4_clkreq_pin" = "CLKREQ_DISABLED"
+	register "pcie_rp5_clkreq_pin" = "CLKREQ_DISABLED"
+
+	# GPIO for PERST_0
+	# If the Board has PERST_0 signal, assign the GPIO
+	# If the Board does not have PERST_0, assign GPIO_PRT0_UDEF
+	register "prt0_gpio" = "GPIO_122"
+
+	# EMMC TX DATA Delay 1
+	# Refer to EDS-Vol2-22.3.
+	# [14:8] steps of delay for HS400, each 125ps.
+	# [6:0] steps of delay for SDR104/HS200, each 125ps.
+	register "emmc_tx_data_cntl1" = "0x0C16"
+
+	# EMMC TX DATA Delay 2
+	# Refer to EDS-Vol2-22.3.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_tx_data_cntl2" = "0x28162828"
+
+	# EMMC RX CMD/DATA Delay 1
+	# Refer to EDS-Vol2-22.3.
+	# [30:24] steps of delay for SDR50, each 125ps.
+	# [22:16] steps of delay for DDR50, each 125ps.
+	# [14:8] steps of delay for SDR25/HS50, each 125ps.
+	# [6:0] steps of delay for SDR12, each 125ps.
+	register "emmc_rx_cmd_data_cntl1" = "0x00181717"
+
+	# EMMC RX CMD/DATA Delay 2
+	# Refer to EDS-Vol2-22.3.
+	# [17:16] stands for Rx Clock before Output Buffer
+	# [14:8] steps of delay for Auto Tuning Mode, each 125ps.
+	# [6:0] steps of delay for HS200, each 125ps.
+	register "emmc_rx_cmd_data_cntl2" = "0x10008"
+
+	# Enable DPTF
+	register "dptf_enable" = "1"
+
+	# PL1 override 12000 mW: the energy calculation is wrong with the
+	# current VR solution. Experiments show that SoC TDP max (6W) can
+	# be reached when RAPL PL1 is set to 12W.
+	register "tdp_pl1_override_mw" = "12000"
+
+	# Enable Audio Clock and Power gating
+	register "hdaudio_clk_gate_enable" = "1"
+	register "hdaudio_pwr_gate_enable" = "1"
+	register "hdaudio_bios_config_lockdown" = "1"
+
+	# Enable lpss s0ix
+	register "lpss_s0ix_enable" = "1"
+
+	# GPE configuration
+	# Note that GPE events called out in ASL code rely on this
+	# route, i.e., if this route changes then the affected GPE
+	# offset bits also need to be changed. This sets the PMC register
+	# GPE_CFG fields.
+	register "gpe0_dw1" = "PMC_GPE_N_31_0"
+	register "gpe0_dw2" = "PMC_GPE_N_63_32"
+	register "gpe0_dw3" = "PMC_GPE_SW_31_0"
+
+	# Enable I2C0 for audio codec at 400kHz
+	register "i2c[0]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 44,
+		.fall_time_ns = 22,
+	}"
+
+	# Enable I2C2 bus early for TPM at 400kHz
+	register "i2c[2]" = "{
+		.early_init = 1,
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 40,
+		.fall_time_ns = 20,
+	}"
+
+	# touchscreen at 400kHz
+	register "i2c[3]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 70,
+		.fall_time_ns = 164,
+	}"
+
+	# trackpad at 400kHz
+	register "i2c[4]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 20,
+		.fall_time_ns = 164,
+	}"
+
+	# digitizer at 400kHz
+	register "i2c[5]" = "{
+		.speed = I2C_SPEED_FAST,
+		.rise_time_ns = 152,
+		.fall_time_ns = 30,
+	}"
+
+	# Minimum SLP S3 assertion width 28ms.
+	register "slp_s3_assertion_width_usecs" = "28000"
+
+	device domain 0 on
+		device pci 00.0 on  end	# - Host Bridge
+		device pci 00.1 on  end	# - DPTF
+		device pci 00.2 on  end	# - NPK
+		device pci 02.0 on  end	# - Gen
+		device pci 03.0 on  end	# - Iunit
+		device pci 0d.0 on  end	# - P2SB
+		device pci 0d.1 on  end	# - PMC
+		device pci 0d.2 on  end	# - SPI
+		device pci 0d.3 on  end	# - Shared SRAM
+		device pci 0e.0 on	# - Audio
+			chip drivers/generic/max98357a
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+		end
+		device pci 11.0 off end	# - ISH
+		device pci 12.0 off end	# - SATA
+		device pci 13.0 off end	# - Root Port 2 - PCIe-A 0
+		device pci 13.1 off end	# - Root Port 3 - PCIe-A 1
+		device pci 13.2 off end	# - Root Port 4 - PCIe-A 2
+		device pci 13.3 off end	# - Root Port 5 - PCIe-A 3
+		device pci 14.0 on
+			chip drivers/intel/wifi
+				register "wake" = "GPE0_DW3_00"
+				device pci 00.0 on end
+			end
+		end	# - Root Port 0 - PCIe-B 0 - Wifi
+		device pci 14.1 off end	# - Root Port 1 - PCIe-B 1
+		device pci 15.0 on  end	# - XHCI
+		device pci 15.1 off end # - XDCI
+		device pci 16.0 on	# - I2C 0
+			chip drivers/i2c/da7219
+				register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+				register "btn_cfg" = "50"
+				register "mic_det_thr" = "500"
+				register "jack_ins_deb" = "20"
+				register "jack_det_rate" = ""32ms_64ms""
+				register "jack_rem_deb" = "1"
+				register "a_d_btn_thr" = "0xa"
+				register "d_b_btn_thr" = "0x16"
+				register "b_c_btn_thr" = "0x21"
+				register "c_mic_btn_thr" = "0x3e"
+				register "btn_avg" = "4"
+				register "adc_1bit_rpt" = "1"
+				register "micbias_lvl" = "2600"
+				register "mic_amp_in_sel" = ""diff""
+				device i2c 1a on end
+			end
+		end
+		device pci 16.1 on  end	# - I2C 1
+		device pci 16.2 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+				device i2c 50 on end
+			end
+		end	# - I2C 2
+		device pci 16.3 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0001""
+				register "desc" = ""ELAN Touchscreen""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+				register "probed" = "1"
+				device i2c 10 on end
+			end
+		end	# - I2C 3
+		device pci 17.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+				register "wake" = "GPE0_DW1_15"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end # - I2C 4
+		device pci 17.1 on
+			chip drivers/i2c/wacom
+				register "generic" = "{
+					 .hid = WCOM50C1_HID,
+					 .cid = PNP0C50_CID,
+					 .desc = WCOM_DT_DESC,
+					 .irq = IRQ_LEVEL_LOW(GPIO_13_IRQ),
+				}"
+				register "hid_desc_reg_offset" = "0x1"
+				device i2c 0x9 on end
+			end
+		end	# - I2C 5
+		device pci 17.2 on  end	# - I2C 6
+		device pci 17.3 on  end	# - I2C 7
+		device pci 18.0 on  end	# - UART 0
+		device pci 18.1 on  end	# - UART 1
+		device pci 18.2 on  end	# - UART 2
+		device pci 18.3 on  end	# - UART 3
+		device pci 19.0 on  end	# - SPI 0
+		device pci 19.1 on  end	# - SPI 1
+		device pci 19.2 on  end	# - SPI 2
+		device pci 1a.0 on  end	# - PWM
+		device pci 1b.0 on  end	# - SDCARD
+		device pci 1c.0 on  end	# - eMMC
+		device pci 1e.0 off end	# - SDIO
+		device pci 1f.0 on	# - LPC
+			chip ec/google/chromeec
+				device pnp 0c09.0 on end
+			end
+		end
+		device pci 1f.1 on  end	# - SMBUS
+	end
+end
diff --git a/src/mainboard/intel/leafhill/variants/snappy/include/variant/acpi/dptf.asl b/src/mainboard/intel/leafhill/variants/snappy/include/variant/acpi/dptf.asl
new file mode 100644
index 0000000..a233c92
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/snappy/include/variant/acpi/dptf.asl
@@ -0,0 +1,89 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2014 Google Inc.
+ * Copyright (C) 2015 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define DPTF_CPU_PASSIVE	100
+#define DPTF_CPU_CRITICAL	105
+#define DPTF_CPU_ACTIVE_AC0	90
+#define DPTF_CPU_ACTIVE_AC1	80
+#define DPTF_CPU_ACTIVE_AC2	70
+#define DPTF_CPU_ACTIVE_AC3	60
+#define DPTF_CPU_ACTIVE_AC4	50
+
+#define DPTF_TSR0_SENSOR_ID	0
+#define DPTF_TSR0_SENSOR_NAME	"Battery"
+#define DPTF_TSR0_PASSIVE	48
+#define DPTF_TSR0_CRITICAL	70
+
+#define DPTF_TSR1_SENSOR_ID	1
+#define DPTF_TSR1_SENSOR_NAME	"Ambient"
+#define DPTF_TSR1_PASSIVE	53
+#define DPTF_TSR1_CRITICAL	80
+
+#define DPTF_TSR2_SENSOR_ID	2
+#define DPTF_TSR2_SENSOR_NAME	"Charger"
+#define DPTF_TSR2_PASSIVE	90
+#define DPTF_TSR2_CRITICAL	100
+
+#define DPTF_ENABLE_CHARGER
+
+/* Charger performance states, board-specific values from charger and EC */
+Name (CHPS, Package () {
+	Package () { 0, 0, 0, 0, 255, 0xBB8, "mA", 0 },	/* 3A (MAX) */
+	Package () { 0, 0, 0, 0, 24, 0x600, "mA", 0 },	/* 1.5A */
+	Package () { 0, 0, 0, 0, 16, 0x400, "mA", 0 },	/* 1.0A */
+	Package () { 0, 0, 0, 0, 8, 0x200, "mA", 0 },	/* 0.5A */
+	Package () { 0, 0, 0, 0, 0, 0x000, "mA", 0 },	/* 0.0A */
+})
+
+Name (DTRT, Package () {
+	/* CPU Throttle Effect on CPU */
+	Package () { \_SB.PCI0.TCPU, \_SB.PCI0.TCPU, 100, 50, 0, 0, 0, 0 },
+
+	/* CPU Effect on Temp Sensor 0 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR0, 100, 600, 0, 0, 0, 0 },
+
+#ifdef DPTF_ENABLE_CHARGER
+	/* Charger Effect on Temp Sensor 1 */
+	Package () { \_SB.DPTF.TCHG, \_SB.DPTF.TSR2, 100, 1200, 0, 0, 0, 0 },
+#endif
+
+	/* CPU Effect on Temp Sensor 1 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR1, 200, 80, 0, 0, 0, 0 },
+
+	/* CPU Effect on Temp Sensor 2 */
+	Package () { \_SB.PCI0.TCPU, \_SB.DPTF.TSR2, 100, 150, 0, 0, 0, 0 },
+})
+
+Name (MPPC, Package ()
+{
+	0x2,		/* Revision */
+	Package () {	/* Power Limit 1 */
+		0,	/* PowerLimitIndex, 0 for Power Limit 1 */
+		4000,	/* PowerLimitMinimum */
+		12000,	/* PowerLimitMaximum */
+		1000,	/* TimeWindowMinimum */
+		1000,	/* TimeWindowMaximum */
+		200	/* StepSize */
+	},
+	Package () {	/* Power Limit 2 */
+		1,	/* PowerLimitIndex, 1 for Power Limit 2 */
+		8000,	/* PowerLimitMinimum */
+		8000,	/* PowerLimitMaximum */
+		1000,	/* TimeWindowMinimum */
+		1000,	/* TimeWindowMaximum */
+		1000	/* StepSize */
+	}
+})
diff --git a/src/mainboard/intel/leafhill/variants/snappy/include/variant/ec.h b/src/mainboard/intel/leafhill/variants/snappy/include/variant/ec.h
new file mode 100644
index 0000000..586f106
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/snappy/include/variant/ec.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_EC_H
+#define MAINBOARD_EC_H
+
+#include <baseboard/ec.h>
+
+#endif
diff --git a/src/mainboard/intel/leafhill/variants/snappy/include/variant/gpio.h b/src/mainboard/intel/leafhill/variants/snappy/include/variant/gpio.h
new file mode 100644
index 0000000..6d1ce5a
--- /dev/null
+++ b/src/mainboard/intel/leafhill/variants/snappy/include/variant/gpio.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_GPIO_H
+#define MAINBOARD_GPIO_H
+
+#include <baseboard/gpio.h>
+
+#endif /* MAINBOARD_GPIO_H */



More information about the coreboot-gerrit mailing list