[coreboot-gerrit] New patch to review for coreboot: mainboard/intel/galileo: Gen1 - Set correct I2C scripts
Lee Leahy (lpleahyjr@gmail.com)
gerrit at coreboot.org
Sat Jun 18 19:02:27 CEST 2016
Lee Leahy (lpleahyjr at gmail.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15258
-gerrit
commit fdb9b45a92b3693ec9b2e96e1abfc026663f4213
Author: Lee Leahy <leroy.p.leahy at intel.com>
Date: Sat Jun 18 09:54:43 2016 -0700
mainboard/intel/galileo: Gen1 - Set correct I2C scripts
Switch the I2C scripts to properly match the I2C address selection for
the Galileo Gen1 board.
TEST=Build an run on Galileo Gen1
Change-Id: I9fc8b59a3a719abb474c99a83e0d538794626da9
Signed-off-by: Lee Leahy <leroy.p.leahy at intel.com>
---
src/mainboard/intel/galileo/gpio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/src/mainboard/intel/galileo/gpio.c b/src/mainboard/intel/galileo/gpio.c
index 0b55bc6..8f3c2e3 100644
--- a/src/mainboard/intel/galileo/gpio.c
+++ b/src/mainboard/intel/galileo/gpio.c
@@ -39,7 +39,7 @@ void car_mainboard_pre_console_init(void)
else
script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
- ? gen1_hsuart0_0x21 : gen1_hsuart0_0x20;
+ ? gen1_hsuart0_0x20 : gen1_hsuart0_0x21;
reg_script_run(script);
}
}
@@ -57,7 +57,7 @@ void mainboard_gpio_i2c_init(device_t dev)
/* Determine which I2C address is in use */
script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
- ? gen1_i2c_0x21_init : gen1_i2c_0x20_init;
+ ? gen1_i2c_0x20_init : gen1_i2c_0x21_init;
/* Initialize the I2C chips */
reg_script_run(script);
More information about the coreboot-gerrit
mailing list