[coreboot-gerrit] Patch set updated for coreboot: src/mainboard: Add vendor ELMEX with two board templates
Kyösti Mälkki (kyosti.malkki@gmail.com)
gerrit at coreboot.org
Thu Jul 28 15:34:06 CEST 2016
Kyösti Mälkki (kyosti.malkki at gmail.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15928
-gerrit
commit afb1d35fc600a16bf45b6e7f3300387c865e50c0
Author: Yuichi Ito <yui.corebt at gmail.com>
Date: Thu Jul 28 13:34:18 2016 +0900
src/mainboard: Add vendor ELMEX with two board templates
Both added boards used amd/persimmon as template.
Change-Id: I263b54e0f49b6f1ba730c7f87de41f990ba8fe67
Signed-off-by: Yuichi Ito <yui.corebt at gmail.com>
Change-Id: Ic172fc57ad0aa2b6a9be3f493664127a37861468
Signed-off-by: Kyösti Mälkki <kyosti.malkki at gmail.com>
---
src/mainboard/elmex/Kconfig | 16 +
src/mainboard/elmex/Kconfig.name | 2 +
src/mainboard/elmex/pcm205400/BiosCallOuts.c | 93 ++++++
src/mainboard/elmex/pcm205400/Kconfig | 77 +++++
src/mainboard/elmex/pcm205400/Kconfig.name | 2 +
src/mainboard/elmex/pcm205400/Makefile.inc | 29 ++
src/mainboard/elmex/pcm205400/OemCustomize.c | 157 ++++++++++
src/mainboard/elmex/pcm205400/OptionsIds.h | 56 ++++
.../elmex/pcm205400/PlatformGnbPcieComplex.h | 65 ++++
src/mainboard/elmex/pcm205400/acpi/gpe.asl | 78 +++++
src/mainboard/elmex/pcm205400/acpi/ide.asl | 240 +++++++++++++++
src/mainboard/elmex/pcm205400/acpi/mainboard.asl | 63 ++++
src/mainboard/elmex/pcm205400/acpi/routing.asl | 336 +++++++++++++++++++++
src/mainboard/elmex/pcm205400/acpi/sata.asl | 145 +++++++++
src/mainboard/elmex/pcm205400/acpi/sleep.asl | 117 +++++++
src/mainboard/elmex/pcm205400/acpi/superio.asl | 14 +
src/mainboard/elmex/pcm205400/acpi/usb_oc.asl | 170 +++++++++++
src/mainboard/elmex/pcm205400/acpi_tables.c | 53 ++++
src/mainboard/elmex/pcm205400/board_info.txt | 5 +
src/mainboard/elmex/pcm205400/buildOpts.c | 297 ++++++++++++++++++
src/mainboard/elmex/pcm205400/cmos.layout | 76 +++++
src/mainboard/elmex/pcm205400/devicetree.cb | 157 ++++++++++
src/mainboard/elmex/pcm205400/dsdt.asl | 63 ++++
src/mainboard/elmex/pcm205400/irq_tables.c | 111 +++++++
src/mainboard/elmex/pcm205400/mainboard.c | 178 +++++++++++
src/mainboard/elmex/pcm205400/mptable.c | 148 +++++++++
src/mainboard/elmex/pcm205400/platform_cfg.h | 254 ++++++++++++++++
src/mainboard/elmex/pcm205400/romstage.c | 111 +++++++
src/mainboard/elmex/pcm205401/BiosCallOuts.c | 93 ++++++
src/mainboard/elmex/pcm205401/Kconfig | 77 +++++
src/mainboard/elmex/pcm205401/Kconfig.name | 2 +
src/mainboard/elmex/pcm205401/Makefile.inc | 29 ++
src/mainboard/elmex/pcm205401/OemCustomize.c | 157 ++++++++++
src/mainboard/elmex/pcm205401/OptionsIds.h | 56 ++++
.../elmex/pcm205401/PlatformGnbPcieComplex.h | 65 ++++
src/mainboard/elmex/pcm205401/acpi/gpe.asl | 78 +++++
src/mainboard/elmex/pcm205401/acpi/ide.asl | 240 +++++++++++++++
src/mainboard/elmex/pcm205401/acpi/mainboard.asl | 63 ++++
src/mainboard/elmex/pcm205401/acpi/routing.asl | 336 +++++++++++++++++++++
src/mainboard/elmex/pcm205401/acpi/sata.asl | 145 +++++++++
src/mainboard/elmex/pcm205401/acpi/sleep.asl | 117 +++++++
src/mainboard/elmex/pcm205401/acpi/superio.asl | 14 +
src/mainboard/elmex/pcm205401/acpi/usb_oc.asl | 170 +++++++++++
src/mainboard/elmex/pcm205401/acpi_tables.c | 53 ++++
src/mainboard/elmex/pcm205401/board_info.txt | 5 +
src/mainboard/elmex/pcm205401/buildOpts.c | 297 ++++++++++++++++++
src/mainboard/elmex/pcm205401/cmos.layout | 76 +++++
src/mainboard/elmex/pcm205401/devicetree.cb | 157 ++++++++++
src/mainboard/elmex/pcm205401/dsdt.asl | 63 ++++
src/mainboard/elmex/pcm205401/irq_tables.c | 111 +++++++
src/mainboard/elmex/pcm205401/mainboard.c | 178 +++++++++++
src/mainboard/elmex/pcm205401/mptable.c | 148 +++++++++
src/mainboard/elmex/pcm205401/platform_cfg.h | 254 ++++++++++++++++
src/mainboard/elmex/pcm205401/romstage.c | 111 +++++++
54 files changed, 6208 insertions(+)
diff --git a/src/mainboard/elmex/Kconfig b/src/mainboard/elmex/Kconfig
new file mode 100644
index 0000000..d1fc9ad
--- /dev/null
+++ b/src/mainboard/elmex/Kconfig
@@ -0,0 +1,16 @@
+if VENDOR_ELMEX
+
+choice
+ prompt "Mainboard model"
+
+source "src/mainboard/elmex/*/Kconfig.name"
+
+endchoice
+
+source "src/mainboard/elmex/*/Kconfig"
+
+config MAINBOARD_VENDOR
+ string
+ default "ELMEX"
+
+endif # VENDOR_ELMEX
diff --git a/src/mainboard/elmex/Kconfig.name b/src/mainboard/elmex/Kconfig.name
new file mode 100644
index 0000000..b2dcf2e
--- /dev/null
+++ b/src/mainboard/elmex/Kconfig.name
@@ -0,0 +1,2 @@
+config VENDOR_ELMEX
+ bool "ELMEX"
diff --git a/src/mainboard/elmex/pcm205400/BiosCallOuts.c b/src/mainboard/elmex/pcm205400/BiosCallOuts.c
new file mode 100644
index 0000000..9a2a9bb
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/BiosCallOuts.c
@@ -0,0 +1,93 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include "heapManager.h"
+#include "SB800.h"
+#include <stdlib.h>
+
+static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr);
+static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr);
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_DO_RESET, agesa_Reset },
+ {AGESA_READ_SPD, agesa_ReadSpd },
+ {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
+ {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
+ {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset },
+ {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit },
+ {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/* Call the host environment interface to provide a user hook opportunity. */
+static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr)
+{
+ // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage.
+ // Make sure the right speed settings are selected.
+ ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5;
+ return AGESA_SUCCESS;
+}
+
+/* PCIE slot reset control */
+static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr)
+{
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ PCIe_SLOT_RESET_INFO *ResetInfo;
+
+ UINT32 GpioMmioAddr;
+ UINT32 AcpiMmioAddr;
+ UINT8 Data8;
+ UINT16 Data16;
+
+ FcnData = Data;
+ ResetInfo = ConfigPtr;
+ // Get SB800 MMIO Base (AcpiMmioAddr)
+ WriteIo8(0xCD6, 0x27);
+ Data8 = ReadIo8(0xCD7);
+ Data16=Data8<<8;
+ WriteIo8(0xCD6, 0x26);
+ Data8 = ReadIo8(0xCD7);
+ Data16|=Data8;
+ AcpiMmioAddr = (UINT32)Data16 << 16;
+ Status = AGESA_UNSUPPORTED;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ switch (ResetInfo->ResetId)
+ {
+ case 46: // GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
+ Data8 &= ~(UINT8)BIT6 ;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
+ Data8 |= BIT6 ;
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ }
+ return Status;
+}
diff --git a/src/mainboard/elmex/pcm205400/Kconfig b/src/mainboard/elmex/pcm205400/Kconfig
new file mode 100644
index 0000000..e279aea
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/Kconfig
@@ -0,0 +1,77 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+if BOARD_ELMEX_PCM205400
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select CPU_AMD_AGESA_FAMILY14
+ select NORTHBRIDGE_AMD_AGESA_FAMILY14
+ select SOUTHBRIDGE_AMD_CIMX_SB800
+ select SUPERIO_FINTEK_F81865F
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_4096
+ select GFXUMA
+
+config MAINBOARD_DIR
+ string
+ default elmex/pcm205400
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "pcm205400"
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x200000
+
+config MAX_CPUS
+ int
+ default 2
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config VGA_BIOS
+ bool
+ default n
+
+#config VGA_BIOS_FILE
+# string "VGA BIOS path and filename"
+# depends on VGA_BIOS
+# default "rom/video/OntarioGenericVbios.bin"
+
+config VGA_BIOS_ID
+ string
+ default "1002,9802"
+
+config SB800_AHCI_ROM
+ bool
+ default n
+
+endif # BOARD_ELMEX_PCM205400
diff --git a/src/mainboard/elmex/pcm205400/Kconfig.name b/src/mainboard/elmex/pcm205400/Kconfig.name
new file mode 100644
index 0000000..445b588
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_ELMEX_PCM205400
+ bool "pcm205400"
diff --git a/src/mainboard/elmex/pcm205400/Makefile.inc b/src/mainboard/elmex/pcm205400/Makefile.inc
new file mode 100644
index 0000000..ba56286
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/Makefile.inc
@@ -0,0 +1,29 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+ifeq ($(CONFIG_AHCI_BIOS),y)
+stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID))
+cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom
+pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE))
+pci$(stripped_ahcibios_id).rom-type := optionrom
+endif
+
+romstage-y += buildOpts.c
+romstage-y += BiosCallOuts.c
+romstage-y += OemCustomize.c
+
+ramstage-y += buildOpts.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += OemCustomize.c
diff --git a/src/mainboard/elmex/pcm205400/OemCustomize.c b/src/mainboard/elmex/pcm205400/OemCustomize.c
new file mode 100644
index 0000000..825364e
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/OemCustomize.c
@@ -0,0 +1,157 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "PlatformGnbPcieComplex.h"
+
+#include <string.h>
+#include <northbridge/amd/agesa/agesawrapper.h>
+#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h>
+#include <PlatformMemoryConfiguration.h>
+
+#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE
+
+/**
+ * OemCustomizeInitEarly
+ *
+ * Description:
+ * This stub function will call the host environment through the binary block
+ * interface (call-out port) to provide a user hook opportunity
+ *
+ * Parameters:
+ * @param[in] *InitEarly
+ *
+ * @retval VOID
+ *
+ **/
+
+static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly)
+{
+ AGESA_STATUS Status;
+ VOID *BrazosPcieComplexListPtr;
+ VOID *BrazosPciePortPtr;
+ VOID *BrazosPcieDdiPtr;
+
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+PCIe_PORT_DESCRIPTOR PortList [] = {
+ // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0)
+ }
+};
+
+PCIe_DDI_DESCRIPTOR DdiList [] = {
+ // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+ //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+ {ConnectorTypeLvds, Aux1, Hdp1}
+ },
+ // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...)
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+ //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
+ {ConnectorTypeDP, Aux2, Hdp2}
+ }
+};
+
+PCIe_COMPLEX_DESCRIPTOR Brazos = {
+ DESCRIPTOR_TERMINATE_LIST,
+ 0,
+ &PortList[0],
+ &DdiList[0]
+};
+
+ // GNB PCIe topology Porting
+
+ //
+ // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
+ //
+ AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList);
+
+ AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
+ ASSERT(Status == AGESA_SUCCESS);
+
+ BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+ AllocHeapParams.BufferPtr += sizeof(Brazos);
+ BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr;
+
+ AllocHeapParams.BufferPtr += sizeof(PortList);
+ BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+ memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos));
+ memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList));
+ memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList));
+
+
+ ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr;
+ ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
+
+ InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr;
+ InitEarly->GnbConfig.PsppPolicy = 0;
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------
+ * CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ * use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
+ PSO_END
+};
+
+const struct OEM_HOOK OemCustomize = {
+ .InitEarly = OemInitEarly,
+};
diff --git a/src/mainboard/elmex/pcm205400/OptionsIds.h b/src/mainboard/elmex/pcm205400/OptionsIds.h
new file mode 100644
index 0000000..2d8381b
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/OptionsIds.h
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ * This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ * IDSOPT_IDS_ENABLED
+ * IDSOPT_ERROR_TRAP_ENABLED
+ * IDSOPT_CONTROL_ENABLED
+ * IDSOPT_TRACING_ENABLED
+ * IDSOPT_PERF_ANALYSIS
+ * IDSOPT_ASSERT_ENABLED
+ * IDS_DEBUG_PORT
+ * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED TRUE
+//#define IDSOPT_TRACING_ENABLED TRUE
+#define IDSOPT_ASSERT_ENABLED TRUE
+
+//#define IDSOPT_DEBUG_ENABLED FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT FALSE
+//#define IDS_DEBUG_PORT 0x80
+
+#endif
diff --git a/src/mainboard/elmex/pcm205400/PlatformGnbPcieComplex.h b/src/mainboard/elmex/pcm205400/PlatformGnbPcieComplex.h
new file mode 100644
index 0000000..4132c7c
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/PlatformGnbPcieComplex.h
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H
+#define _PLATFORM_GNB_PCIE_COMPLEX_H
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include <cpu/amd/agesa/s3_resume.h>
+
+//GNB GPP Port4
+#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port5
+#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port6
+#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port7
+#define GNB_GPP_PORT7_PORT_PRESENT 0 //0:Disable 1:Enable
+#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port8
+#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+
+#endif //_PLATFORM_GNB_PCIE_COMPLEX_H
diff --git a/src/mainboard/elmex/pcm205400/acpi/gpe.asl b/src/mainboard/elmex/pcm205400/acpi/gpe.asl
new file mode 100644
index 0000000..2f22758
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi/gpe.asl
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+Scope(\_GPE) { /* Start Scope GPE */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ /* Notify (\_TZ.TZ00, 0x80) */
+ }
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+} /* End Scope GPE */
+
+/* Contains the GPEs for USB overcurrent */
+#include "usb_oc.asl"
diff --git a/src/mainboard/elmex/pcm205400/acpi/ide.asl b/src/mainboard/elmex/pcm205400/acpi/ide.asl
new file mode 100644
index 0000000..59ea078
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi/ide.asl
@@ -0,0 +1,240 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "ide.asl"
+ }
+ }
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+ 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+ 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+ 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+ 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+ 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+ Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+ PPTS, 8, /* Primary PIO Slave Timing */
+ PPTM, 8, /* Primary PIO Master Timing */
+ OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
+ PMTM, 8, /* Primary MWDMA Master Timing */
+ OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
+ OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
+ PPSM, 4, /* Primary PIO slave Mode */
+ OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
+ OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
+ PDSM, 4, /* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+ Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
+ Increment(Local0)
+ Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
+ Increment(Local1)
+ Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+ Name (_ADR, Zero)
+ Method(_GTM, 0, Serialized)
+ {
+ NAME(OTBF, Buffer(20) { /* out buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
+ CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+ /* Just return if the channel is disabled */
+ If(And(PPCR, 0x01)) { /* primary PIO control */
+ Return(OTBF)
+ }
+
+ /* Always tell them independent timing available and IOChannelReady used on both drives */
+ Or(BFFG, 0x1A, BFFG)
+
+ Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
+ Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
+
+ If(And(PDCR, 0x01)) { /* It's under UDMA mode */
+ Or(BFFG, 0x01, BFFG)
+ Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+ }
+ Else {
+ Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
+ }
+
+ If(And(PDCR, 0x02)) { /* It's under UDMA mode */
+ Or(BFFG, 0x04, BFFG)
+ Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+ }
+ Else {
+ Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
+ }
+
+ Return(OTBF) /* out buffer */
+ } /* End Method(_GTM) */
+
+ Method(_STM, 3, Serialized)
+ {
+ NAME(INBF, Buffer(20) { /* in buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+ Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+ Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+ Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+ Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+ Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+ If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDMM,)
+ Or(PDCR, 0x01, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTM)
+ }
+ }
+
+ If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDSM,)
+ Or(PDCR, 0x02, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTS)
+ }
+ }
+ /* Return(INBF) */
+ } /*End Method(_STM) */
+ Device(MST)
+ {
+ Name(_ADR, 0)
+ Method(_GTF, 0, Serialized) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xA0, CMDA)
+ Store(0xA0, CMDB)
+ Store(0xA0, CMDC)
+
+ Or(PPMM, 0x08, POMD)
+
+ If(And(PDCR, 0x01)) {
+ Or(PDMM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTM),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(MST) */
+
+ Device(SLAV)
+ {
+ Name(_ADR, 1)
+ Method(_GTF, 0, Serialized) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xB0, CMDA)
+ Store(0xB0, CMDB)
+ Store(0xB0, CMDC)
+
+ Or(PPSM, 0x08, POMD)
+
+ If(And(PDCR, 0x02)) {
+ Or(PDSM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTS),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(SLAV) */
+}
diff --git a/src/mainboard/elmex/pcm205400/acpi/mainboard.asl b/src/mainboard/elmex/pcm205400/acpi/mainboard.asl
new file mode 100644
index 0000000..b666a4f
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi/mainboard.asl
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Data to be patched by the BIOS during POST */
+/* FIXME the patching is not done yet! */
+/* Memory related values */
+Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+Name(PBLN, 0x0) /* Length of BIOS area */
+
+Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
+Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+/* Some global data */
+Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+Name(OSV, Ones) /* Assume nothing */
+Name(PMOD, One) /* Assume APIC */
+
+Scope(\_SB) {
+ Method(OSFL, 0){
+
+ if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */
+
+ if(CondRefOf(\_OSI))
+ {
+ Store(1, OSVR) /* Assume some form of XP */
+ if (\_OSI("Windows 2006")) /* Vista */
+ {
+ Store(2, OSVR)
+ }
+ } else {
+ If(WCMP(\_OS,"Linux")) {
+ Store(3, OSVR) /* Linux */
+ } Else {
+ Store(4, OSVR) /* Gotta be WinCE */
+ }
+ }
+ Return(OSVR)
+ }
+}
+
+Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+} /* End Scope SI */
diff --git a/src/mainboard/elmex/pcm205400/acpi/routing.asl b/src/mainboard/elmex/pcm205400/acpi/routing.asl
new file mode 100644
index 0000000..6f94b45
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi/routing.asl
@@ -0,0 +1,336 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "routing.asl"
+ }
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+ Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - RS780 Host Controller */
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+ Package(){0x0001FFFF, 0, INTC, 0 },
+ Package(){0x0001FFFF, 1, INTD, 0 },
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ Package(){0x0003FFFF, 0, INTD, 0 },
+ Package(){0x0003FFFF, 1, INTA, 0 },
+ Package(){0x0003FFFF, 2, INTB, 0 },
+ Package(){0x0003FFFF, 3, INTC, 0 },
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, INTA, 0 },
+ Package(){0x0004FFFF, 1, INTB, 0 },
+ Package(){0x0004FFFF, 2, INTC, 0 },
+ Package(){0x0004FFFF, 3, INTD, 0 },
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ Package(){0x0005FFFF, 0, INTB, 0 },
+ Package(){0x0005FFFF, 1, INTC, 0 },
+ Package(){0x0005FFFF, 2, INTD, 0 },
+ Package(){0x0005FFFF, 3, INTA, 0 },
+ /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+ Package(){0x0006FFFF, 0, INTC, 0 },
+ Package(){0x0006FFFF, 1, INTD, 0 },
+ Package(){0x0006FFFF, 2, INTA, 0 },
+ Package(){0x0006FFFF, 3, INTB, 0 },
+ /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+ Package(){0x0007FFFF, 0, INTD, 0 },
+ Package(){0x0007FFFF, 1, INTA, 0 },
+ Package(){0x0007FFFF, 2, INTB, 0 },
+ Package(){0x0007FFFF, 3, INTC, 0 },
+
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+
+ /* SB devices */
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, INTD, 0 },
+
+ /* OHCI, dev 18, 19, 22 func 0
+ * EHCI, dev 18, 19, 22 func 2 */
+ Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */
+ Package(){0x0012FFFF, 1, INTB, 0 }, /* Dev 12, INTB, handled by INTB device, Global */
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+
+ Package(){0x0016FFFF, 0, INTC, 0 },
+ Package(){0x0016FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI; F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+
+ Package(){0x0015FFFF, 0, INTA, 0 },
+ Package(){0x0015FFFF, 1, INTB, 0 },
+ Package(){0x0015FFFF, 2, INTC, 0 },
+ Package(){0x0015FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - RS780 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+ Package(){0x0001FFFF, 0, 0, 18 },
+ Package(){0x0001FFFF, 1, 0, 19 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, 0, 18 },
+ /* Package(){0x0002FFFF, 1, 0, 19 }, */
+ /* Package(){0x0002FFFF, 2, 0, 16 }, */
+ /* Package(){0x0002FFFF, 3, 0, 17 }, */
+
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ Package(){0x0003FFFF, 0, 0, 19 },
+ Package(){0x0003FFFF, 1, 0, 16 },
+ Package(){0x0003FFFF, 2, 0, 17 },
+ Package(){0x0003FFFF, 3, 0, 18 },
+
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, 0, 16 },
+ Package(){0x0004FFFF, 1, 0, 17 },
+ Package(){0x0004FFFF, 2, 0, 18 },
+ Package(){0x0004FFFF, 3, 0, 19 },
+
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ Package(){0x0005FFFF, 0, 0, 17 },
+ Package(){0x0005FFFF, 1, 0, 18 },
+ Package(){0x0005FFFF, 2, 0, 19 },
+ Package(){0x0005FFFF, 3, 0, 16 },
+
+ /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+ Package(){0x0006FFFF, 0, 0, 18 },
+ Package(){0x0006FFFF, 1, 0, 19 },
+ Package(){0x0006FFFF, 2, 0, 16 },
+ Package(){0x0006FFFF, 3, 0, 17 },
+
+ /* Bus 0, Dev 7 - PCIe Bridge for network card */
+ Package(){0x0007FFFF, 0, 0, 19 },
+ Package(){0x0007FFFF, 1, 0, 16 },
+ Package(){0x0007FFFF, 2, 0, 17 },
+ Package(){0x0007FFFF, 3, 0, 18 },
+
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, 0, 19 },
+
+ /* OHCI, dev 18, 19, 22 func 0
+ * EHCI, dev 18, 19, 22 func 2 */
+ Package(){0x0012FFFF, 0, 0, 18 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 17 },
+
+ Package(){0x0016FFFF, 0, 0, 18 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+ /* Package(){0x00140004, 2, 0, 18 }, */
+ /* Package(){0x00140004, 3, 0, 19 }, */
+ /* Package(){0x00140005, 1, 0, 17 }, */
+ /* Package(){0x00140006, 1, 0, 17 }, */
+
+ /* TODO: pcie */
+ Package(){0x0015FFFF, 0, 0, 16 },
+ Package(){0x0015FFFF, 1, 0, 17 },
+ Package(){0x0015FFFF, 2, 0, 18 },
+ Package(){0x0015FFFF, 3, 0, 19 },
+ })
+
+ Name(PR1, Package(){
+ /* Internal graphics - RS780 VGA, Bus1, Dev5 */
+ Package(){0x0005FFFF, 0, INTA, 0 },
+ Package(){0x0005FFFF, 1, INTB, 0 },
+ Package(){0x0005FFFF, 2, INTC, 0 },
+ Package(){0x0005FFFF, 3, INTD, 0 },
+ })
+ Name(APR1, Package(){
+ /* Internal graphics - RS780 VGA, Bus1, Dev5 */
+ Package(){0x0005FFFF, 0, 0, 18 },
+ Package(){0x0005FFFF, 1, 0, 19 },
+ /* Package(){0x0005FFFF, 2, 0, 20 }, */
+ /* Package(){0x0005FFFF, 3, 0, 17 }, */
+ })
+
+ Name(PS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(APS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+ Name(APS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+
+ Name(PE0, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APE0, Package(){
+ /* PCIe slot - Hooked to PCIe */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PE1, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(APE1, Package(){
+ /* PCIe slot - Hooked to PCIe */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PE2, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APE2, Package(){
+ /* PCIe slot - Hooked to PCIe */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PE3, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+ Name(APE3, Package(){
+ /* PCIe slot - Hooked to PCIe */
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+
+ Name(PCIB, Package(){
+ /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Func 4. */
+ Package(){0x0003FFFF, 0, 0, 0x14 },
+ Package(){0x0003FFFF, 1, 0, 0x15 },
+ Package(){0x0003FFFF, 2, 0, 0x16 },
+ Package(){0x0003FFFF, 3, 0, 0x17 },
+ Package(){0x0004FFFF, 0, 0, 0x15 },
+ Package(){0x0004FFFF, 1, 0, 0x16 },
+ Package(){0x0004FFFF, 2, 0, 0x17 },
+ Package(){0x0004FFFF, 3, 0, 0x14 },
+ Package(){0x0005FFFF, 0, 0, 0x16 },
+ Package(){0x0005FFFF, 1, 0, 0x17 },
+ Package(){0x0005FFFF, 2, 0, 0x14 },
+ Package(){0x0005FFFF, 3, 0, 0x15 },
+ })
+}
diff --git a/src/mainboard/elmex/pcm205400/acpi/sata.asl b/src/mainboard/elmex/pcm205400/acpi/sata.asl
new file mode 100644
index 0000000..9e0e535
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi/sata.asl
@@ -0,0 +1,145 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(SATA) {
+ Name(_ADR, 0x00110000)
+ #include "sata.asl"
+ }
+ }
+}
+*/
+
+Name(STTM, Buffer(20) {
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+ \_GPE._L1F()
+}
+
+Device(PMRY)
+{
+ Name(_ADR, 0)
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(PMST) {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P0IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ }/* end of PMST */
+
+ Device(PSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P1IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of PSLA */
+} /* end of PMRY */
+
+
+Device(SEDY)
+{
+ Name(_ADR, 1) /* IDE Scondary Channel */
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(SMST)
+ {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P2IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SMST */
+
+ Device(SSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P3IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SSLA */
+} /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+ Method(_L1F,0x0,NotSerialized) {
+ if (\_SB.P0PR) {
+ if (LGreater(\_SB.P0IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P0PR)
+ }
+
+ if (\_SB.P1PR) {
+ if (LGreater(\_SB.P1IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P1PR)
+ }
+
+ if (\_SB.P2PR) {
+ if (LGreater(\_SB.P2IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P2PR)
+ }
+
+ if (\_SB.P3PR) {
+ if (LGreater(\_SB.P3IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P3PR)
+ }
+ }
+}
diff --git a/src/mainboard/elmex/pcm205400/acpi/sleep.asl b/src/mainboard/elmex/pcm205400/acpi/sleep.asl
new file mode 100644
index 0000000..b3fd07e
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi/sleep.asl
@@ -0,0 +1,117 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+* -none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method. This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver. This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(\_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Don't allow PCIRST# to reset USB */
+ if (LEqual(Arg0,3)){
+ Store(0,URRE)
+ }
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+} /* End Method(\_PTS) */
+
+/*
+* \_BFS OEM Back From Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*/
+Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+}
+
+/*
+* \_WAK System Wake method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* Return package of 2 DWords
+* Dword 1 - Status
+* 0x00000000 wake succeeded
+* 0x00000001 Wake was signaled but failed due to lack of power
+* 0x00000002 Wake was signaled but failed due to thermal condition
+* Dword 2 - Power Supply state
+* if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* Re-enable HPET */
+ Store(1,HPDE)
+
+ /* Restore PCIRST# so it resets USB */
+ if (LEqual(Arg0,3)){
+ Store(1,URRE)
+ }
+
+ /* Arbitrarily clear PciExpWakeStatus */
+ Store(PWST, Local1)
+ Store(Local1, PWST)
+
+ /* if(DeRefOf(Index(WKST,0))) {
+ * Store(0, Index(WKST,1))
+ * } else {
+ * Store(Arg0, Index(WKST,1))
+ * }
+ */
+ Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/elmex/pcm205400/acpi/superio.asl b/src/mainboard/elmex/pcm205400/acpi/superio.asl
new file mode 100644
index 0000000..daf6e91
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi/superio.asl
@@ -0,0 +1,14 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* No Super I/O device or functionality yet */
diff --git a/src/mainboard/elmex/pcm205400/acpi/usb_oc.asl b/src/mainboard/elmex/pcm205400/acpi/usb_oc.asl
new file mode 100644
index 0000000..6e9c701
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi/usb_oc.asl
@@ -0,0 +1,170 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "usb.asl"
+ }
+*/
+
+/* USB overcurrent mapping pins. */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
+
+Method(UCOC, 0) {
+ Sleep(20)
+ Store(0x13,CMTI)
+ Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+ Scope (\_GPE) {
+ Method (_L13) {
+ UCOC()
+ if(LEqual(GPB0,PLC0)) {
+ Not(PLC0,PLC0)
+ Store(PLC0, \_SB.PT0D)
+ }
+ }
+ }
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+ Scope (\_GPE) {
+ Method (_L14) {
+ UCOC()
+ if (LEqual(GPB1,PLC1)) {
+ Not(PLC1,PLC1)
+ Store(PLC1, \_SB.PT1D)
+ }
+ }
+ }
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+ Scope (\_GPE) {
+ Method (_L15) {
+ UCOC()
+ if (LEqual(GPB2,PLC2)) {
+ Not(PLC2,PLC2)
+ Store(PLC2, \_SB.PT2D)
+ }
+ }
+ }
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+ Scope (\_GPE) {
+ Method (_L16) {
+ UCOC()
+ if (LEqual(GPB3,PLC3)) {
+ Not(PLC3,PLC3)
+ Store(PLC3, \_SB.PT3D)
+ }
+ }
+ }
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+ Scope (\_GPE) {
+ Method (_L19) {
+ UCOC()
+ if (LEqual(GPB4,PLC4)) {
+ Not(PLC4,PLC4)
+ Store(PLC4, \_SB.PT4D)
+ }
+ }
+ }
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+ Scope (\_GPE) {
+ Method (_L1A) {
+ UCOC()
+ if (LEqual(GPB5,PLC5)) {
+ Not(PLC5,PLC5)
+ Store(PLC5, \_SB.PT5D)
+ }
+ }
+ }
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1C) { */
+ Method (_L06) {
+ UCOC()
+ if (LEqual(GPB6,PLC6)) {
+ Not(PLC6,PLC6)
+ Store(PLC6, \_SB.PT6D)
+ }
+ }
+ }
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1D) { */
+ Method (_L07) {
+ UCOC()
+ if (LEqual(GPB7,PLC7)) {
+ Not(PLC7,PLC7)
+ Store(PLC7, \_SB.PT7D)
+ }
+ }
+ }
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+ Scope (\_GPE) {
+ Method (_L17) {
+ if (LEqual(G8IS,PLC8)) {
+ Not(PLC8,PLC8)
+ Store(PLC8, \_SB.PT8D)
+ }
+ }
+ }
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+ Scope (\_GPE) {
+ Method (_L0E) {
+ if (LEqual(G9IS,0)) {
+ Store(1,\_SB.PT9D)
+ }
+ }
+ }
+}
diff --git a/src/mainboard/elmex/pcm205400/acpi_tables.c b/src/mainboard/elmex/pcm205400/acpi_tables.c
new file mode 100644
index 0000000..9b92c05
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/acpi_tables.c
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <northbridge/amd/agesa/agesawrapper.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam14.h>
+
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB800 IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ CONFIG_MAX_CPUS, IO_APIC_ADDR, 0);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
diff --git a/src/mainboard/elmex/pcm205400/board_info.txt b/src/mainboard/elmex/pcm205400/board_info.txt
new file mode 100644
index 0000000..85cb19a
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/board_info.txt
@@ -0,0 +1,5 @@
+Board name: DBFT1-00-EVAL-KT (Persimmon)
+Category: eval
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/elmex/pcm205400/buildOpts.c b/src/mainboard/elmex/pcm205400/buildOpts.c
new file mode 100644
index 0000000..fe4e779
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/buildOpts.c
@@ -0,0 +1,297 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * @file
+ *
+ * AMD User options selection for a Brazos platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ */
+
+#include <stdlib.h>
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+
+/* Select the cpu family. */
+#define INSTALL_FAMILY_10_SUPPORT FALSE
+#define INSTALL_FAMILY_12_SUPPORT FALSE
+#define INSTALL_FAMILY_14_SUPPORT TRUE
+#define INSTALL_FAMILY_15_SUPPORT FALSE
+
+/* Select the cpu socket type. */
+#define INSTALL_G34_SOCKET_SUPPORT FALSE
+#define INSTALL_C32_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT FALSE
+#define INSTALL_FP1_SOCKET_SUPPORT FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT TRUE
+#define INSTALL_AM3_SOCKET_SUPPORT FALSE
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE
+#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE
+#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE
+#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE
+
+#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE
+#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE
+
+#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE
+#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE
+#define BLDOPT_REMOVE_ECC_SUPPORT FALSE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE
+#define BLDOPT_REMOVE_DQS_TRAINING FALSE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE
+ #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE
+#define BLDOPT_REMOVE_SRAT FALSE
+#define BLDOPT_REMOVE_SLIT FALSE
+#define BLDOPT_REMOVE_WHEA FALSE
+#define BLDOPT_REMOVE_DMI TRUE
+#define BLDOPT_REMOVE_HT_ASSIST TRUE
+#define BLDOPT_REMOVE_ATM_MODE TRUE
+//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE
+//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE
+#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE
+//#define BLDOPT_REMOVE_C6_STATE TRUE
+#define BLDOPT_REMOVE_GFX_RECOVERY TRUE
+#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE
+
+
+#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
+
+#define BLDCFG_VRM_CURRENT_LIMIT 24000
+//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1
+#define BLDCFG_VRM_SLEW_RATE 5000
+//#define BLDCFG_VRM_NB_SLEW_RATE 5000
+//#define BLDCFG_VRM_ADDITIONAL_DELAY 0
+//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE
+#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000
+//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0
+
+//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C'
+//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
+//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE
+#define BLDCFG_PLAT_NUM_IO_APICS 3
+//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled
+//#define BLDCFG_PLATFORM_C1E_OPDATA 0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0
+#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
+#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840
+//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto
+#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList
+#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
+//#define BLDCFG_STARTING_BUSNUM 0
+//#define BLDCFG_MAXIMUM_BUSNUM 0xf8
+//#define BLDCFG_ALLOCATED_BUSNUMS 0x20
+//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0
+//#define BLDCFG_BUID_SWAP_LIST 0
+//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0
+//#define BLDCFG_HTFABRIC_LIMITS_LIST 0
+//#define BLDCFG_HTCHAIN_LIMITS_LIST 0
+//#define BLDCFG_BUS_NUMBERS_LIST 0
+//#define BLDCFG_IGNORE_LINK_LIST 0
+//#define BLDCFG_LINK_SKIP_REGANG_LIST 0
+//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0
+//#define BLDCFG_USE_HT_ASSIST TRUE
+//#define BLDCFG_USE_ATM_MODE TRUE
+//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm
+#define BLDCFG_S3_LATE_RESTORE TRUE
+//#define BLDCFG_USE_32_BYTE_REFRESH FALSE
+//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE
+//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance
+//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE
+//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE
+//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0
+#define BLDCFG_CFG_GNB_HD_AUDIO FALSE
+//#define BLDCFG_CFG_ABM_SUPPORT FALSE
+//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0
+//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0
+//#define BLDCFG_MEM_INIT_PSTATE 0
+//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
+//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_POWER_DOWN TRUE
+#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
+//#define BLDCFG_ONLINE_SPARE FALSE
+//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE
+#define BLDCFG_BANK_SWIZZLE TRUE
+#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
+#define BLDCFG_USE_BURST_MODE FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
+//#define BLDCFG_ENABLE_ECC_FEATURE TRUE
+//#define BLDCFG_ECC_REDIRECTION FALSE
+//#define BLDCFG_SCRUB_DRAM_RATE 0
+//#define BLDCFG_SCRUB_L2_RATE 0
+//#define BLDCFG_SCRUB_L3_RATE 0
+//#define BLDCFG_SCRUB_IC_RATE 0
+//#define BLDCFG_SCRUB_DC_RATE 0
+//#define BLDCFG_ECC_SYNC_FLOOD 0
+//#define BLDCFG_ECC_SYMBOL_SIZE 0
+//#define BLDCFG_1GB_ALIGN FALSE
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO
+#define BLDCFG_UMA_ALLOCATION_SIZE 0
+#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
+#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED
+#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000
+#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000
+
+/*
+ * Agesa configuration values selection.
+ * Uncomment and specify the value for the configuration options
+ * needed by the system.
+ */
+#include "AGESA.h"
+
+/* The fixed MTRR values to be set after memory initialization. */
+CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] =
+{
+ { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull },
+ { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull },
+ { CPU_LIST_TERMINAL }
+};
+
+/* Include the files that instantiate the configuration definitions. */
+
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterface.h"
+
+/*****************************************************************************
+ * Define the RELEASE VERSION string
+ *
+ * The Release Version string should identify the next planned release.
+ * When a branch is made in preparation for a release, the release manager
+ * should change/confirm that the branch version of this file contains the
+ * string matching the desired version for the release. The trunk version of
+ * the file should always contain a trailing 'X'. This will make sure that a
+ * development build from trunk will not be confused for a released version.
+ * The release manager will need to remove the trailing 'X' and update the
+ * version string as appropriate for the release. The trunk copy of this file
+ * should also be updated/incremented for the next expected version, + trailing 'X'
+ ****************************************************************************/
+// This is the delivery package title, "BrazosPI"
+// This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+
+// This is the release version number of the AGESA component
+// This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '}
+
+/* MEMORY_BUS_SPEED */
+#define DDR400_FREQUENCY 200 ///< DDR 400
+#define DDR533_FREQUENCY 266 ///< DDR 533
+#define DDR667_FREQUENCY 333 ///< DDR 667
+#define DDR800_FREQUENCY 400 ///< DDR 800
+#define DDR1066_FREQUENCY 533 ///< DDR 1066
+#define DDR1333_FREQUENCY 667 ///< DDR 1333
+#define DDR1600_FREQUENCY 800 ///< DDR 1600
+#define DDR1866_FREQUENCY 933 ///< DDR 1866
+#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file. The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
+
+// Instantiate all solution relevant data.
+#include "PlatformInstall.h"
+
diff --git a/src/mainboard/elmex/pcm205400/cmos.layout b/src/mainboard/elmex/pcm205400/cmos.layout
new file mode 100644
index 0000000..f47185f
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/cmos.layout
@@ -0,0 +1,76 @@
+#*****************************************************************************
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#*****************************************************************************
+
+entries
+
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+456 1 e 1 ECC_memory
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/elmex/pcm205400/devicetree.cb b/src/mainboard/elmex/pcm205400/devicetree.cb
new file mode 100644
index 0000000..afab841
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/devicetree.cb
@@ -0,0 +1,157 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+chip northbridge/amd/agesa/family14/root_complex
+ device cpu_cluster 0 on
+ chip cpu/amd/agesa/family14
+ device lapic 0 on end
+ end
+ end
+ device domain 0 on
+ subsystemid 0x1022 0x1510 inherit
+ chip northbridge/amd/agesa/family14 # CPU side of HT root complex
+# device pci 18.0 on # northbridge
+ chip northbridge/amd/agesa/family14 # PCI side of HT root complex
+ device pci 0.0 on end # Root Complex
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
+ device pci 4.0 on end # PCIE P2P bridge on-board NIC
+ device pci 5.0 off end # PCIE P2P bridge
+ device pci 6.0 on end # PCIE P2P bridge PCIe slot
+ device pci 7.0 off end # PCIE P2P bridge
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ end # agesa northbridge
+
+ chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # OHCI USB 0-4
+ device pci 12.2 on end # EHCI USB 0-4
+ device pci 13.0 on end # OHCI USB 5-9
+ device pci 13.2 on end # EHCI USB 5-9
+ device pci 14.0 on # SM
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ end # SM
+ device pci 14.1 on end # IDE 0x439c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/fintek/f81865f
+ device pnp 4e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 4e.3 off end # Parallel Port
+ device pnp 4e.4 off end # Hardware Monitor
+ device pnp 4e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 4e.6 off end # GPIO
+ device pnp 4e.a off end # PME
+ device pnp 4e.10 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 4e.11 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ end # f81865f
+ end #LPC
+ device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
+ device pci 14.5 off end # OHCI FS/LS USB
+ device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
+ device pci 15.0 off end # PCIe PortA
+ device pci 15.1 off end # PCIe PortB
+ device pci 15.2 off end # PCIe PortC
+ device pci 15.3 off end # PCIe PortD
+ device pci 16.0 off end # OHCI USB 10-13
+ device pci 16.2 off end # EHCI USB 10-13
+ register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
+ register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
+
+ #set up SB800 Fan control registers and IMC fan controls
+ register "imc_port_address" = "0x6E" # 0x2E and 0x6E are common
+ register "fan0_enabled" = "1"
+ register "fan1_enabled" = "1"
+ register "imc_fan_zone0_enabled" = "1"
+ register "imc_fan_zone1_enabled" = "1"
+
+ register "fan0_config_vals" = "{ \
+ FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
+ FREQ_25KHZ, 0x08, 0x00, 0x00, 0x00, 0x00,\
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
+ register "fan1_config_vals" = "{ \
+ FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
+ FREQ_25KHZ, 0x10, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
+
+ register "imc_zone0_mode1" = " \
+ IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
+ IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT0"
+ register "imc_zone0_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
+ IMC_MODE2_FANIN0 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
+ register "imc_zone0_temp_offset" = "0x00" # No temp offset
+ register "imc_zone0_hysteresis" = "0x05" # Degrees C Hysteresis
+ register "imc_zone0_smbus_addr" = "0x98" # Temp Sensor SMBus address
+ register "imc_zone0_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number
+ register "imc_zone0_pwm_step" = "0x01" # Fan PWM stepping rate
+ register "imc_zone0_ramping" = "0x00" # Disable Fan PWM ramping and stepping
+
+ register "imc_zone1_mode1" = " \
+ IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
+ IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT1"
+ register "imc_zone1_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
+ IMC_MODE2_FANIN1 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
+ register "imc_zone1_temp_offset" = "0x00" # No temp offset
+ register "imc_zone1_hysteresis" = "0x05" # Degrees C Hysteresis
+ register "imc_zone1_smbus_addr" = "0x98" # Temp Sensor SMBus address
+ register "imc_zone1_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number
+ register "imc_zone1_pwm_step" = "0x01" # Fan PWM stepping rate
+ register "imc_zone1_ramping" = "0x00" # Disable Fan PWM ramping and stepping
+
+ # T56N has a Maximum operating temperature of 90C
+ # ZONEX_THRESHOLDS - _AC0 - _AC7, _CRT - Temp Threshold in degrees C
+ # ZONEX_FANSPEEDS - Fan speeds as a "percentage"
+ register "imc_zone0_thresholds" = "{ 87, 82, 77, 72, 65, 1, 0, 0, 90 }"
+ register "imc_zone0_fanspeeds" = "{100, 7, 5, 4, 3, 2, 0, 0 }"
+ register "imc_zone1_thresholds" = "{ 85, 80, 75, 65, 1, 0, 0, 0, 90 }"
+ register "imc_zone1_fanspeeds" = "{100, 10, 6, 4, 3, 0, 0, 0 }"
+
+ end #southbridge/amd/cimx/sb800
+# end # device pci 18.0
+# These seem unnecessary
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 18.5 on end
+ device pci 18.6 on end
+ device pci 18.7 on end
+
+ register "spdAddrLookup" = "
+ {
+ { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
+ { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
+ }"
+
+ end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
+ end #domain
+end #northbridge/amd/agesa/family14/root_complex
diff --git a/src/mainboard/elmex/pcm205400/dsdt.asl b/src/mainboard/elmex/pcm205400/dsdt.asl
new file mode 100644
index 0000000..0cf657f
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/dsdt.asl
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "AMD ", /* OEMID */
+ "COREBOOT", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+ #include "acpi/mainboard.asl"
+
+ #include <cpu/amd/agesa/family14/acpi/cpu.asl>
+
+ #include "acpi/routing.asl"
+
+ Scope(\_SB) {
+ /* global utility methods expected within the \_SB scope */
+ #include <arch/x86/acpi/globutil.asl>
+
+ Device(PCI0) {
+
+ /* Describe the AMD Northbridge */
+ #include <northbridge/amd/agesa/family14/acpi/northbridge.asl>
+
+ /* Describe the AMD Fusion Controller Hub Southbridge */
+ #include <southbridge/amd/cimx/sb800/acpi/fch.asl>
+
+ /* Primary (and only) IDE channel */
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "acpi/ide.asl"
+ } /* end IDEC */
+
+ }
+ } /* End Scope(_SB) */
+
+ /* Contains the supported sleep states for this chipset */
+ #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl>
+
+ /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
+ #include "acpi/sleep.asl"
+
+ #include "acpi/gpe.asl"
+}
+/* End of ASL file */
diff --git a/src/mainboard/elmex/pcm205400/irq_tables.c b/src/mainboard/elmex/pcm205400/irq_tables.c
new file mode 100644
index 0000000..0c53417
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/irq_tables.c
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam14.h>
+
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be between 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = 0;
+ pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+
+
+
+ slot_num++;
+
+
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+
+}
diff --git a/src/mainboard/elmex/pcm205400/mainboard.c b/src/mainboard/elmex/pcm205400/mainboard.c
new file mode 100644
index 0000000..e0440f2
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/mainboard.c
@@ -0,0 +1,178 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include <device/pci_def.h>
+#include <southbridge/amd/common/amd_pci_util.h>
+#include <southbridge/amd/cimx/cimx_util.h>
+#include <arch/acpi.h>
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include <cpu/amd/agesa/s3_resume.h>
+#include <cpu/amd/mtrr.h>
+#include "SBPLATFORM.h"
+#include <southbridge/amd/cimx/sb800/pci_devs.h>
+#include <northbridge/amd/agesa/family14/pci_devs.h>
+
+void set_pcie_reset(void);
+void set_pcie_dereset(void);
+
+/***********************************************************
+ * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
+ * This table is responsible for physically routing the PIC and
+ * IOAPIC IRQs to the different PCI devices on the system. It
+ * is read and written via registers 0xC00/0xC01 as an
+ * Index/Data pair. These values are chipset and mainboard
+ * dependent and should be updated accordingly.
+ *
+ * These values are used by the PCI configuration space,
+ * MP Tables. TODO: Make ACPI use these values too.
+ *
+ * The Persimmon PCI INTA/B/C/D pins are connected to
+ * FCH pins INTE/F/G/H on the schematic so these need
+ * to be routed as well.
+ */
+static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
+ /* INTA# - INTH# */
+ [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,
+ /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */
+ [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,
+ /* IMC INT0 - 5 */
+ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* USB Devs 18/19/20/22 INTA-C */
+ [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,
+ /* IDE, SATA */
+ [0x40] = 0x0B,0x0B,
+ /* GPPInt0 - 3 */
+ [0x50] = 0x0A,0x0B,0x0A,0x0B
+};
+
+static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
+ /* INTA# - INTH# */
+ [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */
+ [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,
+ /* IMC INT0 - 5 */
+ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* USB Devs 18/19/22/20 INTA-C */
+ [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,
+ /* IDE, SATA */
+ [0x40] = 0x11,0x13,
+ /* GPPInt0 - 3 */
+ [0x50] = 0x10,0x11,0x12,0x13
+};
+
+/*
+ * This table defines the index into the picr/intr_data
+ * tables for each device. Any enabled device and slot
+ * that uses hardware interrupts should have an entry
+ * in this table to define its index into the FCH
+ * PCI_INTR register 0xC00/0xC01. This index will define
+ * the interrupt that it should use. Putting PIRQ_A into
+ * the PIN A index for a device will tell that device to
+ * use PIC IRQ 10 if it uses PIN A for its hardware INT.
+ */
+/*
+ * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H
+ * but because PCI INT_PIN swizzling isnt implemented to match
+ * the IDSEL (dev 3) of the slot, the table is adjusted for the
+ * swizzle and INTA is connected to PIRQH so PINA/B/C/D on
+ * off-chip devices should get mapped to PIRQH/E/F/G.
+ */
+static const struct pirq_struct mainboard_pirq_data[] = {
+ /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */
+ {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */
+ {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */
+ {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg: 06.0 */
+ {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */
+ {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */
+ {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */
+ {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */
+ {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */
+ {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */
+ {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 14.1 */
+ {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */
+ {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */
+ {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */
+ {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */
+ {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */
+};
+
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+ pirq_data_ptr = mainboard_pirq_data;
+ pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
+ intr_data_ptr = mainboard_intr_data;
+ picr_data_ptr = mainboard_picr_data;
+}
+
+/**
+ * TODO
+ * SB CIMx callback
+ */
+void set_pcie_reset(void)
+{
+}
+
+/**
+ * TODO
+ * mainboard specific SB CIMx callback
+ */
+void set_pcie_dereset(void)
+{
+}
+
+
+/**********************************************
+ * Enable the dedicated functions of the board.
+ **********************************************/
+static void mainboard_enable(device_t dev)
+{
+ printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+
+ /* enable GPP CLK0 thru CLK1 */
+ /* disable GPP CLK2 thru SLT_GFX_CLK */
+ u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
+ write8(misc_mem_clk_cntrl + 0, 0xFF);
+ write8(misc_mem_clk_cntrl + 1, 0x00);
+ write8(misc_mem_clk_cntrl + 2, 0x00);
+ write8(misc_mem_clk_cntrl + 3, 0x00);
+ write8(misc_mem_clk_cntrl + 4, 0x00);
+
+ /*
+ * Initialize ASF registers to an arbitrary address because someone
+ * long ago set things up this way inside the SPD read code. The
+ * SPD read code has been made generic and moved out of the board
+ * directory, so the ASF init is being done here.
+ */
+ pm_iowrite(0x29, 0x80);
+ pm_iowrite(0x28, 0x61);
+
+ /* Initialize the PIRQ data structures for consumption */
+ pirq_setup();
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/elmex/pcm205400/mptable.c b/src/mainboard/elmex/pcm205400/mptable.c
new file mode 100644
index 0000000..8e954cd
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/mptable.c
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam14.h>
+#include <SBPLATFORM.h>
+#include <southbridge/amd/common/amd_pci_util.h>
+#include <drivers/generic/ioapic/chip.h>
+#include <arch/ioapic.h>
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+
+ /*
+ * By the time this function gets called, the IOAPIC registers
+ * have been written so they can be read to get the correct
+ * APIC ID and Version
+ */
+ u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
+ u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
+
+ /* Intialize the MP_Table */
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+
+ /*
+ * Type 0: Processor Entries:
+ * LAPIC ID, LAPIC Version, CPU Flags:EN/BP,
+ * CPU Signature (Stepping, Model, Family),
+ * Feature Flags
+ */
+ smp_write_processors(mc);
+
+ /*
+ * Type 1: Bus Entries:
+ * Bus ID, Bus Type
+ */
+ mptable_write_buses(mc, NULL, &bus_isa);
+
+ /*
+ * Type 2: I/O APICs:
+ * APIC ID, Version, APIC Flags:EN, Address
+ */
+ smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
+
+ /*
+ * Type 3: I/O Interrupt Table Entries:
+ * Int Type, Int Polarity, Int Level, Source Bus ID,
+ * Source Bus IRQ, Dest APIC ID, Dest PIN#
+ */
+ mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, fn, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin))
+
+ /* APU Internal Graphic Device */
+ PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]);
+
+ /* SMBUS / ACPI */
+ PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]);
+
+ /* Southbridge HD Audio */
+ PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]);
+
+ /* LPC */
+ PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]);
+
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]);
+ PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]);
+ PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]);
+ PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]);
+
+ /* IDE */
+ PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]);
+
+ /* SATA */
+ PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]);
+
+ /* on board NIC & Slot PCIE */
+ PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
+ PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
+
+ /* PCI slots */
+ device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
+ if (dev && dev->enabled) {
+ u8 bus_pci = dev->link_list->secondary;
+ /* PCI_SLOT 0 */
+ PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */
+ PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */
+ PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */
+ PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
+ }
+
+ /* PCIe PortA */
+ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */
+ /* PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */
+ /* PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */
+ /* PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+ IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/elmex/pcm205400/platform_cfg.h b/src/mainboard/elmex/pcm205400/platform_cfg.h
new file mode 100644
index 0000000..660be41
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/platform_cfg.h
@@ -0,0 +1,254 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef _PLATFORM_CFG_H_
+#define _PLATFORM_CFG_H_
+
+/**
+ * @def BIOS_SIZE
+ * BIOS_SIZE_{1,2,4,8,16}M
+ *
+ * In SB800, default ROM size is 1M Bytes, if your platform ROM
+ * bigger than 1M you have to set the ROM size outside CIMx module and
+ * before AGESA module get call.
+ */
+#ifndef BIOS_SIZE
+#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1)
+#endif /* BIOS_SIZE */
+
+/**
+ * @def SPREAD_SPECTRUM
+ * @brief
+ * 0 - Disable Spread Spectrum function
+ * 1 - Enable Spread Spectrum function
+ */
+#define SPREAD_SPECTRUM 0
+
+/**
+ * @def SB_HPET_TIMER
+ * @brief
+ * 0 - Disable hpet
+ * 1 - Enable hpet
+ */
+#define HPET_TIMER 1
+
+/**
+ * @def USB_CONFIG
+ * @brief bit[0-6] used to control USB
+ * 0 - Disable
+ * 1 - Enable
+ * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0
+ * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1
+ * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2
+ * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3
+ * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4
+ * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5
+ * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6
+ */
+#define USB_CONFIG 0x7F
+
+/**
+ * @def PCI_CLOCK_CTRL
+ * @brief bit[0-4] used for PCI Slots Clock Control,
+ * 0 - disable
+ * 1 - enable
+ * PCI SLOT 0 define at BIT0
+ * PCI SLOT 1 define at BIT1
+ * PCI SLOT 2 define at BIT2
+ * PCI SLOT 3 define at BIT3
+ * PCI SLOT 4 define at BIT4
+ */
+#define PCI_CLOCK_CTRL 0x07
+
+/**
+ * @def SATA_CONTROLLER
+ * @brief INCHIP Sata Controller
+ */
+#define SATA_CONTROLLER CIMX_OPTION_ENABLED
+
+/**
+ * @def SATA_MODE
+ * @brief INCHIP Sata Controller Mode
+ * NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#define SATA_MODE CONFIG_SB800_SATA_MODE
+
+/**
+ * @brief INCHIP Sata IDE Controller Mode
+ */
+#define IDE_LEGACY_MODE 0
+#define IDE_NATIVE_MODE 1
+
+/**
+ * @def SATA_IDE_MODE
+ * @brief INCHIP Sata IDE Controller Mode
+ * NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#define SATA_IDE_MODE IDE_LEGACY_MODE
+
+/**
+ * @def EXTERNAL_CLOCK
+ * @brief 00/10: Reference clock from crystal oscillator via
+ * PAD_XTALI and PAD_XTALO
+ *
+ * @def INTERNAL_CLOCK
+ * @brief 01/11: Reference clock from internal clock through
+ * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
+ */
+#define EXTERNAL_CLOCK 0x00
+#define INTERNAL_CLOCK 0x01
+
+/* NOTE: inagua have to using internal clock,
+ * otherwise can not detect sata drive
+ */
+#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
+
+/**
+ * @def SATA_PORT_MULT_CAP_RESERVED
+ * @brief 1 ON, 0 0FF
+ */
+#define SATA_PORT_MULT_CAP_RESERVED 1
+
+
+/**
+ * @def AZALIA_AUTO
+ * @brief Detect Azalia controller automatically.
+ *
+ * @def AZALIA_DISABLE
+ * @brief Disable Azalia controller.
+
+ * @def AZALIA_ENABLE
+ * @brief Enable Azalia controller.
+ */
+#define AZALIA_AUTO 0
+#define AZALIA_DISABLE 1
+#define AZALIA_ENABLE 2
+
+/**
+ * @brief INCHIP HDA controller
+ */
+#define AZALIA_CONTROLLER AZALIA_AUTO
+
+/**
+ * @def AZALIA_PIN_CONFIG
+ * @brief
+ * 0 - disable
+ * 1 - enable
+ */
+#define AZALIA_PIN_CONFIG 1
+
+/**
+ * @def AZALIA_SDIN_PIN
+ * @brief
+ * SDIN0 is define at BIT0 & BIT1
+ * 00 - GPIO PIN
+ * 01 - Reserved
+ * 10 - As a Azalia SDIN pin
+ * SDIN1 is define at BIT2 & BIT3
+ * SDIN2 is define at BIT4 & BIT5
+ * SDIN3 is define at BIT6 & BIT7
+ */
+//#define AZALIA_SDIN_PIN 0xAA
+#define AZALIA_SDIN_PIN 0x2A
+
+/**
+ * @def GPP_CONTROLLER
+ */
+#define GPP_CONTROLLER CIMX_OPTION_ENABLED
+
+/**
+ * @def GPP_CFGMODE
+ * @brief GPP Link Configuration
+ * four possible configuration:
+ * GPP_CFGMODE_X4000
+ * GPP_CFGMODE_X2200
+ * GPP_CFGMODE_X2110
+ * GPP_CFGMODE_X1111
+ */
+#define GPP_CFGMODE GPP_CFGMODE_X1111
+
+/**
+ * @def NB_SB_GEN2
+ * 0 - Disable
+ * 1 - Enable
+ */
+#define NB_SB_GEN2 TRUE
+
+/**
+ * @def SB_GPP_GEN2
+ * 0 - Disable
+ * 1 - Enable
+ */
+#define SB_GPP_GEN2 TRUE
+
+/**
+ * @def SB_GPP_UNHIDE_PORTS
+ * TRUE - ports visible always, even port empty
+ * FALSE - ports invisible if port empty
+ */
+#define SB_GPP_UNHIDE_PORTS FALSE
+
+/**
+ * @def GEC_CONFIG
+ * 0 - Enable
+ * 1 - Disable
+ */
+#define GEC_CONFIG 0
+
+static const CODECENTRY persimmon_codec_alc269[] =
+{
+ /* NID, PinConfig */
+ {0x12, 0x411111F0},
+ {0x14, 0x99130110},
+ {0x21, 0x0121401F},
+ {0x17, 0x411111F0},
+ {0x18, 0x01A19820},
+ {0x19, 0x411111F0},
+ {0x1A, 0x0181302F},
+ {0x1B, 0x411111F0},
+ {0x1D, 0x40069E05},
+ {0x1E, 0x411111F0},
+ {0x20, 0x0001FFFF},
+ {0xff, 0xffffffff} /* end of table */
+};
+
+static const CODECTBLLIST codec_tablelist[] =
+{
+ {0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]},
+ {0x0FFFFFFFFUL, (CODECENTRY*)0x0FFFFFFFFUL}
+};
+
+/**
+ * @def AZALIA_OEM_VERB_TABLE
+ * Mainboard specific codec verb table list
+ */
+#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0])
+
+/* set up an ACPI preferred power management profile */
+/* from acpi.h
+ * PM_UNSPECIFIED = 0,
+ * PM_DESKTOP = 1,
+ * PM_MOBILE = 2,
+ * PM_WORKSTATION = 3,
+ * PM_ENTERPRISE_SERVER = 4,
+ * PM_SOHO_SERVER = 5,
+ * PM_APPLIANCE_PC = 6,
+ * PM_PERFORMANCE_SERVER = 7,
+ * PM_TABLET = 8
+ */
+#define FADT_PM_PROFILE 1
+
+#endif /* _PLATFORM_CFG_H_ */
diff --git a/src/mainboard/elmex/pcm205400/romstage.c b/src/mainboard/elmex/pcm205400/romstage.c
new file mode 100644
index 0000000..0aad4f5
--- /dev/null
+++ b/src/mainboard/elmex/pcm205400/romstage.c
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <commonlib/loglevel.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/amd/car.h>
+#include <northbridge/amd/agesa/agesawrapper.h>
+#include <cpu/x86/bist.h>
+#include <superio/fintek/common/fintek.h>
+#include <superio/fintek/f81865f/f81865f.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/cache.h>
+#include <sb_cimx.h>
+#include "SBPLATFORM.h"
+#include "cbmem.h"
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/agesa/s3_resume.h>
+
+
+#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ u32 val;
+
+ /*
+ * All cores: allow caching of flash chip code and data
+ * (there are no cache-as-ram reliability concerns with family 14h)
+ */
+ __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5);
+ __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800);
+
+ /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */
+ __writemsr (0xc0010062, 0);
+
+ amd_initmmio();
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ post_code(0x30);
+ sb_Poweron_Init();
+
+ post_code(0x31);
+ fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ console_init();
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ /* Load MPB */
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
+
+ post_code(0x37);
+ agesawrapper_amdinitreset();
+
+ post_code(0x39);
+ agesawrapper_amdinitearly();
+
+ int s3resume = acpi_is_wakeup_s3();
+ if (!s3resume) {
+ post_code(0x40);
+ agesawrapper_amdinitpost();
+
+ post_code(0x42);
+ agesawrapper_amdinitenv();
+ amd_initenv();
+
+ } else { /* S3 detect */
+ printk(BIOS_INFO, "S3 detected\n");
+
+ post_code(0x60);
+ agesawrapper_amdinitresume();
+
+ agesawrapper_amds3laterestore();
+
+ post_code(0x61);
+ prepare_for_resume();
+ }
+
+ post_code(0x50);
+ copy_and_run();
+ printk(BIOS_ERR, "Error: copy_and_run() returned!\n");
+
+ post_code(0x54); /* Should never see this post code. */
+}
diff --git a/src/mainboard/elmex/pcm205401/BiosCallOuts.c b/src/mainboard/elmex/pcm205401/BiosCallOuts.c
new file mode 100644
index 0000000..9a2a9bb
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/BiosCallOuts.c
@@ -0,0 +1,93 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include "heapManager.h"
+#include "SB800.h"
+#include <stdlib.h>
+
+static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr);
+static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr);
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_DO_RESET, agesa_Reset },
+ {AGESA_READ_SPD, agesa_ReadSpd },
+ {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
+ {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
+ {AGESA_GNB_PCIE_SLOT_RESET, board_GnbPcieSlotReset },
+ {AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit },
+ {AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/* Call the host environment interface to provide a user hook opportunity. */
+static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr)
+{
+ // Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage.
+ // Make sure the right speed settings are selected.
+ ((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5;
+ return AGESA_SUCCESS;
+}
+
+/* PCIE slot reset control */
+static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr)
+{
+ AGESA_STATUS Status;
+ UINTN FcnData;
+ PCIe_SLOT_RESET_INFO *ResetInfo;
+
+ UINT32 GpioMmioAddr;
+ UINT32 AcpiMmioAddr;
+ UINT8 Data8;
+ UINT16 Data16;
+
+ FcnData = Data;
+ ResetInfo = ConfigPtr;
+ // Get SB800 MMIO Base (AcpiMmioAddr)
+ WriteIo8(0xCD6, 0x27);
+ Data8 = ReadIo8(0xCD7);
+ Data16=Data8<<8;
+ WriteIo8(0xCD6, 0x26);
+ Data8 = ReadIo8(0xCD7);
+ Data16|=Data8;
+ AcpiMmioAddr = (UINT32)Data16 << 16;
+ Status = AGESA_UNSUPPORTED;
+ GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
+ switch (ResetInfo->ResetId)
+ {
+ case 46: // GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot
+ switch (ResetInfo->ResetControl) {
+ case AssertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
+ Data8 &= ~(UINT8)BIT6 ;
+ Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ case DeassertSlotReset:
+ Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
+ Data8 |= BIT6 ;
+ Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8);
+ Status = AGESA_SUCCESS;
+ break;
+ }
+ break;
+ }
+ return Status;
+}
diff --git a/src/mainboard/elmex/pcm205401/Kconfig b/src/mainboard/elmex/pcm205401/Kconfig
new file mode 100644
index 0000000..e80e68b
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/Kconfig
@@ -0,0 +1,77 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+if BOARD_ELMEX_PCM205401
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select CPU_AMD_AGESA_FAMILY14
+ select NORTHBRIDGE_AMD_AGESA_FAMILY14
+ select SOUTHBRIDGE_AMD_CIMX_SB800
+ select SUPERIO_FINTEK_F81865F
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_4096
+ select GFXUMA
+
+config MAINBOARD_DIR
+ string
+ default elmex/pcm205401
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "pcm205401"
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x200000
+
+config MAX_CPUS
+ int
+ default 2
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config VGA_BIOS
+ bool
+ default n
+
+#config VGA_BIOS_FILE
+# string "VGA BIOS path and filename"
+# depends on VGA_BIOS
+# default "rom/video/OntarioGenericVbios.bin"
+
+config VGA_BIOS_ID
+ string
+ default "1002,9802"
+
+config SB800_AHCI_ROM
+ bool
+ default n
+
+endif # BOARD_ELMEX_PCM205401
diff --git a/src/mainboard/elmex/pcm205401/Kconfig.name b/src/mainboard/elmex/pcm205401/Kconfig.name
new file mode 100644
index 0000000..f70b215
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_ELMEX_PCM205401
+ bool "pcm205401"
diff --git a/src/mainboard/elmex/pcm205401/Makefile.inc b/src/mainboard/elmex/pcm205401/Makefile.inc
new file mode 100644
index 0000000..ba56286
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/Makefile.inc
@@ -0,0 +1,29 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+ifeq ($(CONFIG_AHCI_BIOS),y)
+stripped_ahcibios_id = $(call strip_quotes,$(CONFIG_AHCI_BIOS_ID))
+cbfs-files-$(CONFIG_AHCI_BIOS) += pci$(stripped_ahcibios_id).rom
+pci$(stripped_ahcibios_id).rom-file := $(call strip_quotes,$(CONFIG_AHCI_BIOS_FILE))
+pci$(stripped_ahcibios_id).rom-type := optionrom
+endif
+
+romstage-y += buildOpts.c
+romstage-y += BiosCallOuts.c
+romstage-y += OemCustomize.c
+
+ramstage-y += buildOpts.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += OemCustomize.c
diff --git a/src/mainboard/elmex/pcm205401/OemCustomize.c b/src/mainboard/elmex/pcm205401/OemCustomize.c
new file mode 100644
index 0000000..825364e
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/OemCustomize.c
@@ -0,0 +1,157 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "PlatformGnbPcieComplex.h"
+
+#include <string.h>
+#include <northbridge/amd/agesa/agesawrapper.h>
+#include <vendorcode/amd/agesa/f14/Proc/CPU/heapManager.h>
+#include <PlatformMemoryConfiguration.h>
+
+#define FILECODE PROC_RECOVERY_MEM_NB_ON_MRNON_FILECODE
+
+/**
+ * OemCustomizeInitEarly
+ *
+ * Description:
+ * This stub function will call the host environment through the binary block
+ * interface (call-out port) to provide a user hook opportunity
+ *
+ * Parameters:
+ * @param[in] *InitEarly
+ *
+ * @retval VOID
+ *
+ **/
+
+static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly)
+{
+ AGESA_STATUS Status;
+ VOID *BrazosPcieComplexListPtr;
+ VOID *BrazosPciePortPtr;
+ VOID *BrazosPcieDdiPtr;
+
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+PCIe_PORT_DESCRIPTOR PortList [] = {
+ // Initialize Port descriptor (PCIe port, Lanes 4, PCI Device Number 4, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 4),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT4_PORT_PRESENT, GNB_GPP_PORT4_CHANNEL_TYPE, 4, GNB_GPP_PORT4_HOTPLUG_SUPPORT, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_SPEED_MODE, GNB_GPP_PORT4_LINK_ASPM, 46)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 5, PCI Device Number 5, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 5, 5),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT5_PORT_PRESENT, GNB_GPP_PORT5_CHANNEL_TYPE, 5, GNB_GPP_PORT5_HOTPLUG_SUPPORT, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_SPEED_MODE, GNB_GPP_PORT5_LINK_ASPM, 46)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 6, PCI Device Number 6, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 6, 6),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT6_PORT_PRESENT, GNB_GPP_PORT6_CHANNEL_TYPE, 6, GNB_GPP_PORT6_HOTPLUG_SUPPORT, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_SPEED_MODE, GNB_GPP_PORT6_LINK_ASPM, 46)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 7, PCI Device Number 7, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 7, 7),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT7_PORT_PRESENT, GNB_GPP_PORT7_CHANNEL_TYPE, 7, GNB_GPP_PORT7_HOTPLUG_SUPPORT, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_SPEED_MODE, GNB_GPP_PORT7_LINK_ASPM, 0)
+ },
+ // Initialize Port descriptor (PCIe port, Lanes 8, PCI Device Number 8, ...)
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3),
+ PCIE_PORT_DATA_INITIALIZER (GNB_GPP_PORT8_PORT_PRESENT, GNB_GPP_PORT8_CHANNEL_TYPE, 8, GNB_GPP_PORT8_HOTPLUG_SUPPORT, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_SPEED_MODE, GNB_GPP_PORT8_LINK_ASPM, 0)
+ }
+};
+
+PCIe_DDI_DESCRIPTOR DdiList [] = {
+ // Initialize Ddi descriptor (DDI interface Lanes 8:11, DdA, ...)
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+ //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+ {ConnectorTypeLvds, Aux1, Hdp1}
+ },
+ // Initialize Ddi descriptor (DDI interface Lanes 12:15, DdB, ...)
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+ //PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
+ {ConnectorTypeDP, Aux2, Hdp2}
+ }
+};
+
+PCIe_COMPLEX_DESCRIPTOR Brazos = {
+ DESCRIPTOR_TERMINATE_LIST,
+ 0,
+ &PortList[0],
+ &DdiList[0]
+};
+
+ // GNB PCIe topology Porting
+
+ //
+ // Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR
+ //
+ AllocHeapParams.RequestedBufferSize = sizeof(Brazos) + sizeof(PortList) + sizeof(DdiList);
+
+ AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
+ ASSERT(Status == AGESA_SUCCESS);
+
+ BrazosPcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+ AllocHeapParams.BufferPtr += sizeof(Brazos);
+ BrazosPciePortPtr = (PCIe_PORT_DESCRIPTOR *)AllocHeapParams.BufferPtr;
+
+ AllocHeapParams.BufferPtr += sizeof(PortList);
+ BrazosPcieDdiPtr = (PCIe_DDI_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+
+ memcpy(BrazosPcieComplexListPtr, &Brazos, sizeof(Brazos));
+ memcpy(BrazosPciePortPtr, &PortList[0], sizeof(PortList));
+ memcpy(BrazosPcieDdiPtr, &DdiList[0], sizeof(DdiList));
+
+
+ ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->PciePortList = (PCIe_PORT_DESCRIPTOR*)BrazosPciePortPtr;
+ ((PCIe_COMPLEX_DESCRIPTOR*)BrazosPcieComplexListPtr)->DdiLinkList = (PCIe_DDI_DESCRIPTOR*)BrazosPcieDdiPtr;
+
+ InitEarly->GnbConfig.PcieComplexList = BrazosPcieComplexListPtr;
+ InitEarly->GnbConfig.PsppPolicy = 0;
+ return AGESA_SUCCESS;
+}
+
+/*----------------------------------------------------------------------------------------
+ * CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ * use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
+ PSO_END
+};
+
+const struct OEM_HOOK OemCustomize = {
+ .InitEarly = OemInitEarly,
+};
diff --git a/src/mainboard/elmex/pcm205401/OptionsIds.h b/src/mainboard/elmex/pcm205401/OptionsIds.h
new file mode 100644
index 0000000..2d8381b
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/OptionsIds.h
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ * This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ * IDSOPT_IDS_ENABLED
+ * IDSOPT_ERROR_TRAP_ENABLED
+ * IDSOPT_CONTROL_ENABLED
+ * IDSOPT_TRACING_ENABLED
+ * IDSOPT_PERF_ANALYSIS
+ * IDSOPT_ASSERT_ENABLED
+ * IDS_DEBUG_PORT
+ * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED TRUE
+//#define IDSOPT_TRACING_ENABLED TRUE
+#define IDSOPT_ASSERT_ENABLED TRUE
+
+//#define IDSOPT_DEBUG_ENABLED FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT FALSE
+//#define IDS_DEBUG_PORT 0x80
+
+#endif
diff --git a/src/mainboard/elmex/pcm205401/PlatformGnbPcieComplex.h b/src/mainboard/elmex/pcm205401/PlatformGnbPcieComplex.h
new file mode 100644
index 0000000..4132c7c
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/PlatformGnbPcieComplex.h
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H
+#define _PLATFORM_GNB_PCIE_COMPLEX_H
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+#include <cpu/amd/agesa/s3_resume.h>
+
+//GNB GPP Port4
+#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port5
+#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port6
+#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port7
+#define GNB_GPP_PORT7_PORT_PRESENT 0 //0:Disable 1:Enable
+#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port8
+#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+
+#endif //_PLATFORM_GNB_PCIE_COMPLEX_H
diff --git a/src/mainboard/elmex/pcm205401/acpi/gpe.asl b/src/mainboard/elmex/pcm205401/acpi/gpe.asl
new file mode 100644
index 0000000..2f22758
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi/gpe.asl
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+Scope(\_GPE) { /* Start Scope GPE */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ /* Notify (\_TZ.TZ00, 0x80) */
+ }
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+} /* End Scope GPE */
+
+/* Contains the GPEs for USB overcurrent */
+#include "usb_oc.asl"
diff --git a/src/mainboard/elmex/pcm205401/acpi/ide.asl b/src/mainboard/elmex/pcm205401/acpi/ide.asl
new file mode 100644
index 0000000..59ea078
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi/ide.asl
@@ -0,0 +1,240 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "ide.asl"
+ }
+ }
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+ 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+ 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+ 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+ 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+ 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+ Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+ PPTS, 8, /* Primary PIO Slave Timing */
+ PPTM, 8, /* Primary PIO Master Timing */
+ OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
+ PMTM, 8, /* Primary MWDMA Master Timing */
+ OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
+ OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
+ PPSM, 4, /* Primary PIO slave Mode */
+ OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
+ OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
+ PDSM, 4, /* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+ Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
+ Increment(Local0)
+ Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
+ Increment(Local1)
+ Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+ Name (_ADR, Zero)
+ Method(_GTM, 0, Serialized)
+ {
+ NAME(OTBF, Buffer(20) { /* out buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
+ CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+ /* Just return if the channel is disabled */
+ If(And(PPCR, 0x01)) { /* primary PIO control */
+ Return(OTBF)
+ }
+
+ /* Always tell them independent timing available and IOChannelReady used on both drives */
+ Or(BFFG, 0x1A, BFFG)
+
+ Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
+ Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
+
+ If(And(PDCR, 0x01)) { /* It's under UDMA mode */
+ Or(BFFG, 0x01, BFFG)
+ Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+ }
+ Else {
+ Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
+ }
+
+ If(And(PDCR, 0x02)) { /* It's under UDMA mode */
+ Or(BFFG, 0x04, BFFG)
+ Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+ }
+ Else {
+ Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
+ }
+
+ Return(OTBF) /* out buffer */
+ } /* End Method(_GTM) */
+
+ Method(_STM, 3, Serialized)
+ {
+ NAME(INBF, Buffer(20) { /* in buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+ Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+ Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+ Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+ Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+ Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+ If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDMM,)
+ Or(PDCR, 0x01, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTM)
+ }
+ }
+
+ If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDSM,)
+ Or(PDCR, 0x02, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTS)
+ }
+ }
+ /* Return(INBF) */
+ } /*End Method(_STM) */
+ Device(MST)
+ {
+ Name(_ADR, 0)
+ Method(_GTF, 0, Serialized) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xA0, CMDA)
+ Store(0xA0, CMDB)
+ Store(0xA0, CMDC)
+
+ Or(PPMM, 0x08, POMD)
+
+ If(And(PDCR, 0x01)) {
+ Or(PDMM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTM),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(MST) */
+
+ Device(SLAV)
+ {
+ Name(_ADR, 1)
+ Method(_GTF, 0, Serialized) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xB0, CMDA)
+ Store(0xB0, CMDB)
+ Store(0xB0, CMDC)
+
+ Or(PPSM, 0x08, POMD)
+
+ If(And(PDCR, 0x02)) {
+ Or(PDSM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTS),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(SLAV) */
+}
diff --git a/src/mainboard/elmex/pcm205401/acpi/mainboard.asl b/src/mainboard/elmex/pcm205401/acpi/mainboard.asl
new file mode 100644
index 0000000..b666a4f
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi/mainboard.asl
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Data to be patched by the BIOS during POST */
+/* FIXME the patching is not done yet! */
+/* Memory related values */
+Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+Name(PBLN, 0x0) /* Length of BIOS area */
+
+Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
+Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+/* Some global data */
+Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+Name(OSV, Ones) /* Assume nothing */
+Name(PMOD, One) /* Assume APIC */
+
+Scope(\_SB) {
+ Method(OSFL, 0){
+
+ if(LNotEqual(OSVR, Ones)) {Return(OSVR)} /* OS version was already detected */
+
+ if(CondRefOf(\_OSI))
+ {
+ Store(1, OSVR) /* Assume some form of XP */
+ if (\_OSI("Windows 2006")) /* Vista */
+ {
+ Store(2, OSVR)
+ }
+ } else {
+ If(WCMP(\_OS,"Linux")) {
+ Store(3, OSVR) /* Linux */
+ } Else {
+ Store(4, OSVR) /* Gotta be WinCE */
+ }
+ }
+ Return(OSVR)
+ }
+}
+
+Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+} /* End Scope SI */
diff --git a/src/mainboard/elmex/pcm205401/acpi/routing.asl b/src/mainboard/elmex/pcm205401/acpi/routing.asl
new file mode 100644
index 0000000..6f94b45
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi/routing.asl
@@ -0,0 +1,336 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "routing.asl"
+ }
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+ Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - RS780 Host Controller */
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+ Package(){0x0001FFFF, 0, INTC, 0 },
+ Package(){0x0001FFFF, 1, INTD, 0 },
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ Package(){0x0003FFFF, 0, INTD, 0 },
+ Package(){0x0003FFFF, 1, INTA, 0 },
+ Package(){0x0003FFFF, 2, INTB, 0 },
+ Package(){0x0003FFFF, 3, INTC, 0 },
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, INTA, 0 },
+ Package(){0x0004FFFF, 1, INTB, 0 },
+ Package(){0x0004FFFF, 2, INTC, 0 },
+ Package(){0x0004FFFF, 3, INTD, 0 },
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ Package(){0x0005FFFF, 0, INTB, 0 },
+ Package(){0x0005FFFF, 1, INTC, 0 },
+ Package(){0x0005FFFF, 2, INTD, 0 },
+ Package(){0x0005FFFF, 3, INTA, 0 },
+ /* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+ Package(){0x0006FFFF, 0, INTC, 0 },
+ Package(){0x0006FFFF, 1, INTD, 0 },
+ Package(){0x0006FFFF, 2, INTA, 0 },
+ Package(){0x0006FFFF, 3, INTB, 0 },
+ /* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+ Package(){0x0007FFFF, 0, INTD, 0 },
+ Package(){0x0007FFFF, 1, INTA, 0 },
+ Package(){0x0007FFFF, 2, INTB, 0 },
+ Package(){0x0007FFFF, 3, INTC, 0 },
+
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+
+ /* SB devices */
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, INTD, 0 },
+
+ /* OHCI, dev 18, 19, 22 func 0
+ * EHCI, dev 18, 19, 22 func 2 */
+ Package(){0x0012FFFF, 0, INTC, 0 }, /* Dev 12, INTA, handled by INTC device, Global */
+ Package(){0x0012FFFF, 1, INTB, 0 }, /* Dev 12, INTB, handled by INTB device, Global */
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+
+ Package(){0x0016FFFF, 0, INTC, 0 },
+ Package(){0x0016FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI; F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+
+ Package(){0x0015FFFF, 0, INTA, 0 },
+ Package(){0x0015FFFF, 1, INTB, 0 },
+ Package(){0x0015FFFF, 2, INTC, 0 },
+ Package(){0x0015FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - RS780 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+ Package(){0x0001FFFF, 0, 0, 18 },
+ Package(){0x0001FFFF, 1, 0, 19 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, 0, 18 },
+ /* Package(){0x0002FFFF, 1, 0, 19 }, */
+ /* Package(){0x0002FFFF, 2, 0, 16 }, */
+ /* Package(){0x0002FFFF, 3, 0, 17 }, */
+
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ Package(){0x0003FFFF, 0, 0, 19 },
+ Package(){0x0003FFFF, 1, 0, 16 },
+ Package(){0x0003FFFF, 2, 0, 17 },
+ Package(){0x0003FFFF, 3, 0, 18 },
+
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, 0, 16 },
+ Package(){0x0004FFFF, 1, 0, 17 },
+ Package(){0x0004FFFF, 2, 0, 18 },
+ Package(){0x0004FFFF, 3, 0, 19 },
+
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ Package(){0x0005FFFF, 0, 0, 17 },
+ Package(){0x0005FFFF, 1, 0, 18 },
+ Package(){0x0005FFFF, 2, 0, 19 },
+ Package(){0x0005FFFF, 3, 0, 16 },
+
+ /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+ Package(){0x0006FFFF, 0, 0, 18 },
+ Package(){0x0006FFFF, 1, 0, 19 },
+ Package(){0x0006FFFF, 2, 0, 16 },
+ Package(){0x0006FFFF, 3, 0, 17 },
+
+ /* Bus 0, Dev 7 - PCIe Bridge for network card */
+ Package(){0x0007FFFF, 0, 0, 19 },
+ Package(){0x0007FFFF, 1, 0, 16 },
+ Package(){0x0007FFFF, 2, 0, 17 },
+ Package(){0x0007FFFF, 3, 0, 18 },
+
+ /* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, 0, 19 },
+
+ /* OHCI, dev 18, 19, 22 func 0
+ * EHCI, dev 18, 19, 22 func 2 */
+ Package(){0x0012FFFF, 0, 0, 18 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 17 },
+
+ Package(){0x0016FFFF, 0, 0, 18 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+ /* Package(){0x00140004, 2, 0, 18 }, */
+ /* Package(){0x00140004, 3, 0, 19 }, */
+ /* Package(){0x00140005, 1, 0, 17 }, */
+ /* Package(){0x00140006, 1, 0, 17 }, */
+
+ /* TODO: pcie */
+ Package(){0x0015FFFF, 0, 0, 16 },
+ Package(){0x0015FFFF, 1, 0, 17 },
+ Package(){0x0015FFFF, 2, 0, 18 },
+ Package(){0x0015FFFF, 3, 0, 19 },
+ })
+
+ Name(PR1, Package(){
+ /* Internal graphics - RS780 VGA, Bus1, Dev5 */
+ Package(){0x0005FFFF, 0, INTA, 0 },
+ Package(){0x0005FFFF, 1, INTB, 0 },
+ Package(){0x0005FFFF, 2, INTC, 0 },
+ Package(){0x0005FFFF, 3, INTD, 0 },
+ })
+ Name(APR1, Package(){
+ /* Internal graphics - RS780 VGA, Bus1, Dev5 */
+ Package(){0x0005FFFF, 0, 0, 18 },
+ Package(){0x0005FFFF, 1, 0, 19 },
+ /* Package(){0x0005FFFF, 2, 0, 20 }, */
+ /* Package(){0x0005FFFF, 3, 0, 17 }, */
+ })
+
+ Name(PS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(APS5, Package(){
+ /* PCIe slot - Hooked to PCIe slot 5 */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APS6, Package(){
+ /* PCIe slot - Hooked to PCIe slot 6 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+ Name(APS7, Package(){
+ /* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+
+ Name(PE0, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APE0, Package(){
+ /* PCIe slot - Hooked to PCIe */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PE1, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(APE1, Package(){
+ /* PCIe slot - Hooked to PCIe */
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PE2, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APE2, Package(){
+ /* PCIe slot - Hooked to PCIe */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PE3, Package(){
+ /* PCIe slot - Hooked to PCIe slot 10 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+ Name(APE3, Package(){
+ /* PCIe slot - Hooked to PCIe */
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+
+ Name(PCIB, Package(){
+ /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Func 4. */
+ Package(){0x0003FFFF, 0, 0, 0x14 },
+ Package(){0x0003FFFF, 1, 0, 0x15 },
+ Package(){0x0003FFFF, 2, 0, 0x16 },
+ Package(){0x0003FFFF, 3, 0, 0x17 },
+ Package(){0x0004FFFF, 0, 0, 0x15 },
+ Package(){0x0004FFFF, 1, 0, 0x16 },
+ Package(){0x0004FFFF, 2, 0, 0x17 },
+ Package(){0x0004FFFF, 3, 0, 0x14 },
+ Package(){0x0005FFFF, 0, 0, 0x16 },
+ Package(){0x0005FFFF, 1, 0, 0x17 },
+ Package(){0x0005FFFF, 2, 0, 0x14 },
+ Package(){0x0005FFFF, 3, 0, 0x15 },
+ })
+}
diff --git a/src/mainboard/elmex/pcm205401/acpi/sata.asl b/src/mainboard/elmex/pcm205401/acpi/sata.asl
new file mode 100644
index 0000000..9e0e535
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi/sata.asl
@@ -0,0 +1,145 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(SATA) {
+ Name(_ADR, 0x00110000)
+ #include "sata.asl"
+ }
+ }
+}
+*/
+
+Name(STTM, Buffer(20) {
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+ \_GPE._L1F()
+}
+
+Device(PMRY)
+{
+ Name(_ADR, 0)
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(PMST) {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P0IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ }/* end of PMST */
+
+ Device(PSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P1IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of PSLA */
+} /* end of PMRY */
+
+
+Device(SEDY)
+{
+ Name(_ADR, 1) /* IDE Scondary Channel */
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(SMST)
+ {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P2IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SMST */
+
+ Device(SSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P3IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SSLA */
+} /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+ Method(_L1F,0x0,NotSerialized) {
+ if (\_SB.P0PR) {
+ if (LGreater(\_SB.P0IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P0PR)
+ }
+
+ if (\_SB.P1PR) {
+ if (LGreater(\_SB.P1IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P1PR)
+ }
+
+ if (\_SB.P2PR) {
+ if (LGreater(\_SB.P2IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P2PR)
+ }
+
+ if (\_SB.P3PR) {
+ if (LGreater(\_SB.P3IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P3PR)
+ }
+ }
+}
diff --git a/src/mainboard/elmex/pcm205401/acpi/sleep.asl b/src/mainboard/elmex/pcm205401/acpi/sleep.asl
new file mode 100644
index 0000000..b3fd07e
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi/sleep.asl
@@ -0,0 +1,117 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+* -none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method. This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver. This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(\_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Don't allow PCIRST# to reset USB */
+ if (LEqual(Arg0,3)){
+ Store(0,URRE)
+ }
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+} /* End Method(\_PTS) */
+
+/*
+* \_BFS OEM Back From Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*/
+Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+}
+
+/*
+* \_WAK System Wake method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* Return package of 2 DWords
+* Dword 1 - Status
+* 0x00000000 wake succeeded
+* 0x00000001 Wake was signaled but failed due to lack of power
+* 0x00000002 Wake was signaled but failed due to thermal condition
+* Dword 2 - Power Supply state
+* if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* Re-enable HPET */
+ Store(1,HPDE)
+
+ /* Restore PCIRST# so it resets USB */
+ if (LEqual(Arg0,3)){
+ Store(1,URRE)
+ }
+
+ /* Arbitrarily clear PciExpWakeStatus */
+ Store(PWST, Local1)
+ Store(Local1, PWST)
+
+ /* if(DeRefOf(Index(WKST,0))) {
+ * Store(0, Index(WKST,1))
+ * } else {
+ * Store(Arg0, Index(WKST,1))
+ * }
+ */
+ Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/elmex/pcm205401/acpi/superio.asl b/src/mainboard/elmex/pcm205401/acpi/superio.asl
new file mode 100644
index 0000000..daf6e91
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi/superio.asl
@@ -0,0 +1,14 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* No Super I/O device or functionality yet */
diff --git a/src/mainboard/elmex/pcm205401/acpi/usb_oc.asl b/src/mainboard/elmex/pcm205401/acpi/usb_oc.asl
new file mode 100644
index 0000000..6e9c701
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi/usb_oc.asl
@@ -0,0 +1,170 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "usb.asl"
+ }
+*/
+
+/* USB overcurrent mapping pins. */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
+
+Method(UCOC, 0) {
+ Sleep(20)
+ Store(0x13,CMTI)
+ Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+ Scope (\_GPE) {
+ Method (_L13) {
+ UCOC()
+ if(LEqual(GPB0,PLC0)) {
+ Not(PLC0,PLC0)
+ Store(PLC0, \_SB.PT0D)
+ }
+ }
+ }
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+ Scope (\_GPE) {
+ Method (_L14) {
+ UCOC()
+ if (LEqual(GPB1,PLC1)) {
+ Not(PLC1,PLC1)
+ Store(PLC1, \_SB.PT1D)
+ }
+ }
+ }
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+ Scope (\_GPE) {
+ Method (_L15) {
+ UCOC()
+ if (LEqual(GPB2,PLC2)) {
+ Not(PLC2,PLC2)
+ Store(PLC2, \_SB.PT2D)
+ }
+ }
+ }
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+ Scope (\_GPE) {
+ Method (_L16) {
+ UCOC()
+ if (LEqual(GPB3,PLC3)) {
+ Not(PLC3,PLC3)
+ Store(PLC3, \_SB.PT3D)
+ }
+ }
+ }
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+ Scope (\_GPE) {
+ Method (_L19) {
+ UCOC()
+ if (LEqual(GPB4,PLC4)) {
+ Not(PLC4,PLC4)
+ Store(PLC4, \_SB.PT4D)
+ }
+ }
+ }
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+ Scope (\_GPE) {
+ Method (_L1A) {
+ UCOC()
+ if (LEqual(GPB5,PLC5)) {
+ Not(PLC5,PLC5)
+ Store(PLC5, \_SB.PT5D)
+ }
+ }
+ }
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1C) { */
+ Method (_L06) {
+ UCOC()
+ if (LEqual(GPB6,PLC6)) {
+ Not(PLC6,PLC6)
+ Store(PLC6, \_SB.PT6D)
+ }
+ }
+ }
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1D) { */
+ Method (_L07) {
+ UCOC()
+ if (LEqual(GPB7,PLC7)) {
+ Not(PLC7,PLC7)
+ Store(PLC7, \_SB.PT7D)
+ }
+ }
+ }
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+ Scope (\_GPE) {
+ Method (_L17) {
+ if (LEqual(G8IS,PLC8)) {
+ Not(PLC8,PLC8)
+ Store(PLC8, \_SB.PT8D)
+ }
+ }
+ }
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+ Scope (\_GPE) {
+ Method (_L0E) {
+ if (LEqual(G9IS,0)) {
+ Store(1,\_SB.PT9D)
+ }
+ }
+ }
+}
diff --git a/src/mainboard/elmex/pcm205401/acpi_tables.c b/src/mainboard/elmex/pcm205401/acpi_tables.c
new file mode 100644
index 0000000..9b92c05
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/acpi_tables.c
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <northbridge/amd/agesa/agesawrapper.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam14.h>
+
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB800 IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ CONFIG_MAX_CPUS, IO_APIC_ADDR, 0);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ /* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
diff --git a/src/mainboard/elmex/pcm205401/board_info.txt b/src/mainboard/elmex/pcm205401/board_info.txt
new file mode 100644
index 0000000..85cb19a
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/board_info.txt
@@ -0,0 +1,5 @@
+Board name: DBFT1-00-EVAL-KT (Persimmon)
+Category: eval
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/elmex/pcm205401/buildOpts.c b/src/mainboard/elmex/pcm205401/buildOpts.c
new file mode 100644
index 0000000..fe4e779
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/buildOpts.c
@@ -0,0 +1,297 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * @file
+ *
+ * AMD User options selection for a Brazos platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ */
+
+#include <stdlib.h>
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+
+/* Select the cpu family. */
+#define INSTALL_FAMILY_10_SUPPORT FALSE
+#define INSTALL_FAMILY_12_SUPPORT FALSE
+#define INSTALL_FAMILY_14_SUPPORT TRUE
+#define INSTALL_FAMILY_15_SUPPORT FALSE
+
+/* Select the cpu socket type. */
+#define INSTALL_G34_SOCKET_SUPPORT FALSE
+#define INSTALL_C32_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT FALSE
+#define INSTALL_FP1_SOCKET_SUPPORT FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT TRUE
+#define INSTALL_AM3_SOCKET_SUPPORT FALSE
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define BLDOPT_REMOVE_FAMILY_10_SUPPORT TRUE
+#define BLDOPT_REMOVE_FAMILY_12_SUPPORT TRUE
+#define BLDOPT_REMOVE_FAMILY_14_SUPPORT FALSE
+#define BLDOPT_REMOVE_FAMILY_15_SUPPORT TRUE
+
+#define BLDOPT_REMOVE_AM3_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_ASB2_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_C32_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FM1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FP1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FS1_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_FT1_SOCKET_SUPPORT FALSE
+#define BLDOPT_REMOVE_G34_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_S1G3_SOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_S1G4_SOCKET_SUPPORT TRUE
+
+#define BLDOPT_REMOVE_UDIMMS_SUPPORT FALSE
+#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT FALSE
+#define BLDOPT_REMOVE_ECC_SUPPORT FALSE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_BANK_INTERLEAVE FALSE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING FALSE
+#define BLDOPT_REMOVE_DQS_TRAINING FALSE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
+#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PPC FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PCT FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PSD FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_PSS FALSE
+ #define BLDCFG_REMOVE_ACPI_PSTATES_XPSS FALSE
+ #define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT FALSE
+#define BLDOPT_REMOVE_SRAT FALSE
+#define BLDOPT_REMOVE_SLIT FALSE
+#define BLDOPT_REMOVE_WHEA FALSE
+#define BLDOPT_REMOVE_DMI TRUE
+#define BLDOPT_REMOVE_HT_ASSIST TRUE
+#define BLDOPT_REMOVE_ATM_MODE TRUE
+//#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE
+//#define BLDOPT_REMOVE_LOW_POWER_STATE_FOR_PROCHOT TRUE
+#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT FALSE
+//#define BLDOPT_REMOVE_C6_STATE TRUE
+#define BLDOPT_REMOVE_GFX_RECOVERY TRUE
+#define BLDOPT_REMOVE_EARLY_SAMPLES TRUE
+
+
+#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
+
+#define BLDCFG_VRM_CURRENT_LIMIT 24000
+//#define BLDCFG_VRM_NB_CURRENT_LIMIT 0
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD 24000
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 1
+#define BLDCFG_VRM_SLEW_RATE 5000
+//#define BLDCFG_VRM_NB_SLEW_RATE 5000
+//#define BLDCFG_VRM_ADDITIONAL_DELAY 0
+//#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE FALSE
+#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 6000
+//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0
+
+//#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C'
+//#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
+//#define BLDCFG_PROCESSOR_SCOPE_IN_SB FALSE
+#define BLDCFG_PLAT_NUM_IO_APICS 3
+//#define BLDCFG_PLATFORM_C1E_MODE C1eModeDisabled
+//#define BLDCFG_PLATFORM_C1E_OPDATA 0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0
+//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0
+#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
+#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x840
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x840
+//#define BLDCFG_PLATFORM_CPB_MODE CpbModeAuto
+#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &OntarioApMtrrSettingsList
+#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
+//#define BLDCFG_STARTING_BUSNUM 0
+//#define BLDCFG_MAXIMUM_BUSNUM 0xf8
+//#define BLDCFG_ALLOCATED_BUSNUMS 0x20
+//#define BLDCFG_PLATFORM_DEEMPHASIS_LIST 0
+//#define BLDCFG_BUID_SWAP_LIST 0
+//#define BLDCFG_HTDEVICE_CAPABILITIES_OVERRIDE_LIST 0
+//#define BLDCFG_HTFABRIC_LIMITS_LIST 0
+//#define BLDCFG_HTCHAIN_LIMITS_LIST 0
+//#define BLDCFG_BUS_NUMBERS_LIST 0
+//#define BLDCFG_IGNORE_LINK_LIST 0
+//#define BLDCFG_LINK_SKIP_REGANG_LIST 0
+//#define BLDCFG_ADDITIONAL_TOPOLOGIES_LIST 0
+//#define BLDCFG_USE_HT_ASSIST TRUE
+//#define BLDCFG_USE_ATM_MODE TRUE
+//#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm
+#define BLDCFG_S3_LATE_RESTORE TRUE
+//#define BLDCFG_USE_32_BYTE_REFRESH FALSE
+//#define BLDCFG_USE_VARIABLE_MCT_ISOC_PRIORITY FALSE
+//#define BLDCFG_PLATFORM_POWER_POLICY_MODE Performance
+//#define BLDCFG_SET_HTCRC_SYNC_FLOOD FALSE
+//#define BLDCFG_USE_UNIT_ID_CLUMPING FALSE
+//#define BLDCFG_SYSTEM_PHYSICAL_SOCKET_MAP 0
+#define BLDCFG_CFG_GNB_HD_AUDIO FALSE
+//#define BLDCFG_CFG_ABM_SUPPORT FALSE
+//#define BLDCFG_CFG_DYNAMIC_REFRESH_RATE 0
+//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 0
+//#define BLDCFG_MEM_INIT_PSTATE 0
+//#define BLDCFG_AMD_PSTATE_CAP_VALUE 0
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1333_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
+//#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+//#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_LRDIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_POWER_DOWN TRUE
+#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
+//#define BLDCFG_ONLINE_SPARE FALSE
+//#define BLDCFG_MEMORY_PARITY_ENABLE FALSE
+#define BLDCFG_BANK_SWIZZLE TRUE
+#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT DDR1333_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
+#define BLDCFG_USE_BURST_MODE FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
+//#define BLDCFG_ENABLE_ECC_FEATURE TRUE
+//#define BLDCFG_ECC_REDIRECTION FALSE
+//#define BLDCFG_SCRUB_DRAM_RATE 0
+//#define BLDCFG_SCRUB_L2_RATE 0
+//#define BLDCFG_SCRUB_L3_RATE 0
+//#define BLDCFG_SCRUB_IC_RATE 0
+//#define BLDCFG_SCRUB_DC_RATE 0
+//#define BLDCFG_ECC_SYNC_FLOOD 0
+//#define BLDCFG_ECC_SYMBOL_SIZE 0
+//#define BLDCFG_1GB_ALIGN FALSE
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO
+#define BLDCFG_UMA_ALLOCATION_SIZE 0
+#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
+#define BLDCFG_UMA_ALIGNMENT NO_UMA_ALIGNED
+#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000
+#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000
+
+/*
+ * Agesa configuration values selection.
+ * Uncomment and specify the value for the configuration options
+ * needed by the system.
+ */
+#include "AGESA.h"
+
+/* The fixed MTRR values to be set after memory initialization. */
+CONST AP_MTRR_SETTINGS ROMDATA OntarioApMtrrSettingsList[] =
+{
+ { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000ull },
+ { AMD_AP_MTRR_FIX4k_C0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_C8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_D0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_D8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_E0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_E8000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_F0000, 0x1E1E1E1E1E1E1E1Eull },
+ { AMD_AP_MTRR_FIX4k_F8000, 0x1E1E1E1E1E1E1E1Eull },
+ { CPU_LIST_TERMINAL }
+};
+
+/* Include the files that instantiate the configuration definitions. */
+
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterface.h"
+
+/*****************************************************************************
+ * Define the RELEASE VERSION string
+ *
+ * The Release Version string should identify the next planned release.
+ * When a branch is made in preparation for a release, the release manager
+ * should change/confirm that the branch version of this file contains the
+ * string matching the desired version for the release. The trunk version of
+ * the file should always contain a trailing 'X'. This will make sure that a
+ * development build from trunk will not be confused for a released version.
+ * The release manager will need to remove the trailing 'X' and update the
+ * version string as appropriate for the release. The trunk copy of this file
+ * should also be updated/incremented for the next expected version, + trailing 'X'
+ ****************************************************************************/
+// This is the delivery package title, "BrazosPI"
+// This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+
+// This is the release version number of the AGESA component
+// This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING {'V', '1', '.', '1', '.', '0', '.', '3', ' ', ' ', ' ', ' '}
+
+/* MEMORY_BUS_SPEED */
+#define DDR400_FREQUENCY 200 ///< DDR 400
+#define DDR533_FREQUENCY 266 ///< DDR 533
+#define DDR667_FREQUENCY 333 ///< DDR 667
+#define DDR800_FREQUENCY 400 ///< DDR 800
+#define DDR1066_FREQUENCY 533 ///< DDR 1066
+#define DDR1333_FREQUENCY 667 ///< DDR 1333
+#define DDR1600_FREQUENCY 800 ///< DDR 1600
+#define DDR1866_FREQUENCY 933 ///< DDR 1866
+#define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file. The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
+
+// Instantiate all solution relevant data.
+#include "PlatformInstall.h"
+
diff --git a/src/mainboard/elmex/pcm205401/cmos.layout b/src/mainboard/elmex/pcm205401/cmos.layout
new file mode 100644
index 0000000..f47185f
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/cmos.layout
@@ -0,0 +1,76 @@
+#*****************************************************************************
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#*****************************************************************************
+
+entries
+
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+456 1 e 1 ECC_memory
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/elmex/pcm205401/devicetree.cb b/src/mainboard/elmex/pcm205401/devicetree.cb
new file mode 100644
index 0000000..afab841
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/devicetree.cb
@@ -0,0 +1,157 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2011 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+chip northbridge/amd/agesa/family14/root_complex
+ device cpu_cluster 0 on
+ chip cpu/amd/agesa/family14
+ device lapic 0 on end
+ end
+ end
+ device domain 0 on
+ subsystemid 0x1022 0x1510 inherit
+ chip northbridge/amd/agesa/family14 # CPU side of HT root complex
+# device pci 18.0 on # northbridge
+ chip northbridge/amd/agesa/family14 # PCI side of HT root complex
+ device pci 0.0 on end # Root Complex
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456]
+ device pci 4.0 on end # PCIE P2P bridge on-board NIC
+ device pci 5.0 off end # PCIE P2P bridge
+ device pci 6.0 on end # PCIE P2P bridge PCIe slot
+ device pci 7.0 off end # PCIE P2P bridge
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ end # agesa northbridge
+
+ chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # OHCI USB 0-4
+ device pci 12.2 on end # EHCI USB 0-4
+ device pci 13.0 on end # OHCI USB 5-9
+ device pci 13.2 on end # EHCI USB 5-9
+ device pci 14.0 on # SM
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ end # SM
+ device pci 14.1 on end # IDE 0x439c
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/fintek/f81865f
+ device pnp 4e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 4e.3 off end # Parallel Port
+ device pnp 4e.4 off end # Hardware Monitor
+ device pnp 4e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 4e.6 off end # GPIO
+ device pnp 4e.a off end # PME
+ device pnp 4e.10 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 4e.11 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ end # f81865f
+ end #LPC
+ device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0}
+ device pci 14.5 off end # OHCI FS/LS USB
+ device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699)
+ device pci 15.0 off end # PCIe PortA
+ device pci 15.1 off end # PCIe PortB
+ device pci 15.2 off end # PCIe PortC
+ device pci 15.3 off end # PCIe PortD
+ device pci 16.0 off end # OHCI USB 10-13
+ device pci 16.2 off end # EHCI USB 10-13
+ register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow)
+ register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
+
+ #set up SB800 Fan control registers and IMC fan controls
+ register "imc_port_address" = "0x6E" # 0x2E and 0x6E are common
+ register "fan0_enabled" = "1"
+ register "fan1_enabled" = "1"
+ register "imc_fan_zone0_enabled" = "1"
+ register "imc_fan_zone1_enabled" = "1"
+
+ register "fan0_config_vals" = "{ \
+ FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
+ FREQ_25KHZ, 0x08, 0x00, 0x00, 0x00, 0x00,\
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
+ register "fan1_config_vals" = "{ \
+ FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \
+ FREQ_25KHZ, 0x10, 0x00, 0x00, 0x00, 0x00, \
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
+
+ register "imc_zone0_mode1" = " \
+ IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
+ IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT0"
+ register "imc_zone0_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
+ IMC_MODE2_FANIN0 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
+ register "imc_zone0_temp_offset" = "0x00" # No temp offset
+ register "imc_zone0_hysteresis" = "0x05" # Degrees C Hysteresis
+ register "imc_zone0_smbus_addr" = "0x98" # Temp Sensor SMBus address
+ register "imc_zone0_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number
+ register "imc_zone0_pwm_step" = "0x01" # Fan PWM stepping rate
+ register "imc_zone0_ramping" = "0x00" # Disable Fan PWM ramping and stepping
+
+ register "imc_zone1_mode1" = " \
+ IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \
+ IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT1"
+ register "imc_zone1_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \
+ IMC_MODE2_FANIN1 | IMC_MODE2_TEMP_AVERAGING_DISABLED"
+ register "imc_zone1_temp_offset" = "0x00" # No temp offset
+ register "imc_zone1_hysteresis" = "0x05" # Degrees C Hysteresis
+ register "imc_zone1_smbus_addr" = "0x98" # Temp Sensor SMBus address
+ register "imc_zone1_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number
+ register "imc_zone1_pwm_step" = "0x01" # Fan PWM stepping rate
+ register "imc_zone1_ramping" = "0x00" # Disable Fan PWM ramping and stepping
+
+ # T56N has a Maximum operating temperature of 90C
+ # ZONEX_THRESHOLDS - _AC0 - _AC7, _CRT - Temp Threshold in degrees C
+ # ZONEX_FANSPEEDS - Fan speeds as a "percentage"
+ register "imc_zone0_thresholds" = "{ 87, 82, 77, 72, 65, 1, 0, 0, 90 }"
+ register "imc_zone0_fanspeeds" = "{100, 7, 5, 4, 3, 2, 0, 0 }"
+ register "imc_zone1_thresholds" = "{ 85, 80, 75, 65, 1, 0, 0, 0, 90 }"
+ register "imc_zone1_fanspeeds" = "{100, 10, 6, 4, 3, 0, 0, 0 }"
+
+ end #southbridge/amd/cimx/sb800
+# end # device pci 18.0
+# These seem unnecessary
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 18.5 on end
+ device pci 18.6 on end
+ device pci 18.7 on end
+
+ register "spdAddrLookup" = "
+ {
+ { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
+ { {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
+ }"
+
+ end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex
+ end #domain
+end #northbridge/amd/agesa/family14/root_complex
diff --git a/src/mainboard/elmex/pcm205401/dsdt.asl b/src/mainboard/elmex/pcm205401/dsdt.asl
new file mode 100644
index 0000000..0cf657f
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/dsdt.asl
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "AMD ", /* OEMID */
+ "COREBOOT", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+ #include "acpi/mainboard.asl"
+
+ #include <cpu/amd/agesa/family14/acpi/cpu.asl>
+
+ #include "acpi/routing.asl"
+
+ Scope(\_SB) {
+ /* global utility methods expected within the \_SB scope */
+ #include <arch/x86/acpi/globutil.asl>
+
+ Device(PCI0) {
+
+ /* Describe the AMD Northbridge */
+ #include <northbridge/amd/agesa/family14/acpi/northbridge.asl>
+
+ /* Describe the AMD Fusion Controller Hub Southbridge */
+ #include <southbridge/amd/cimx/sb800/acpi/fch.asl>
+
+ /* Primary (and only) IDE channel */
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "acpi/ide.asl"
+ } /* end IDEC */
+
+ }
+ } /* End Scope(_SB) */
+
+ /* Contains the supported sleep states for this chipset */
+ #include <southbridge/amd/cimx/sb800/acpi/sleepstates.asl>
+
+ /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
+ #include "acpi/sleep.asl"
+
+ #include "acpi/gpe.asl"
+}
+/* End of ASL file */
diff --git a/src/mainboard/elmex/pcm205401/irq_tables.c b/src/mainboard/elmex/pcm205401/irq_tables.c
new file mode 100644
index 0000000..0c53417
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/irq_tables.c
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam14.h>
+
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be between 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = 0;
+ pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+
+
+
+ slot_num++;
+
+
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+
+}
diff --git a/src/mainboard/elmex/pcm205401/mainboard.c b/src/mainboard/elmex/pcm205401/mainboard.c
new file mode 100644
index 0000000..e0440f2
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/mainboard.c
@@ -0,0 +1,178 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include <device/pci_def.h>
+#include <southbridge/amd/common/amd_pci_util.h>
+#include <southbridge/amd/cimx/cimx_util.h>
+#include <arch/acpi.h>
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include <cpu/amd/agesa/s3_resume.h>
+#include <cpu/amd/mtrr.h>
+#include "SBPLATFORM.h"
+#include <southbridge/amd/cimx/sb800/pci_devs.h>
+#include <northbridge/amd/agesa/family14/pci_devs.h>
+
+void set_pcie_reset(void);
+void set_pcie_dereset(void);
+
+/***********************************************************
+ * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
+ * This table is responsible for physically routing the PIC and
+ * IOAPIC IRQs to the different PCI devices on the system. It
+ * is read and written via registers 0xC00/0xC01 as an
+ * Index/Data pair. These values are chipset and mainboard
+ * dependent and should be updated accordingly.
+ *
+ * These values are used by the PCI configuration space,
+ * MP Tables. TODO: Make ACPI use these values too.
+ *
+ * The Persimmon PCI INTA/B/C/D pins are connected to
+ * FCH pins INTE/F/G/H on the schematic so these need
+ * to be routed as well.
+ */
+static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
+ /* INTA# - INTH# */
+ [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,
+ /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x08] = 0x00,0xF0,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */
+ [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,
+ /* IMC INT0 - 5 */
+ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* USB Devs 18/19/20/22 INTA-C */
+ [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,
+ /* IDE, SATA */
+ [0x40] = 0x0B,0x0B,
+ /* GPPInt0 - 3 */
+ [0x50] = 0x0A,0x0B,0x0A,0x0B
+};
+
+static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
+ /* INTA# - INTH# */
+ [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */
+ [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,
+ /* IMC INT0 - 5 */
+ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* USB Devs 18/19/22/20 INTA-C */
+ [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,
+ /* IDE, SATA */
+ [0x40] = 0x11,0x13,
+ /* GPPInt0 - 3 */
+ [0x50] = 0x10,0x11,0x12,0x13
+};
+
+/*
+ * This table defines the index into the picr/intr_data
+ * tables for each device. Any enabled device and slot
+ * that uses hardware interrupts should have an entry
+ * in this table to define its index into the FCH
+ * PCI_INTR register 0xC00/0xC01. This index will define
+ * the interrupt that it should use. Putting PIRQ_A into
+ * the PIN A index for a device will tell that device to
+ * use PIC IRQ 10 if it uses PIN A for its hardware INT.
+ */
+/*
+ * Persimmon has PCI slot INTA/B/C/D connected to PIRQE/F/G/H
+ * but because PCI INT_PIN swizzling isnt implemented to match
+ * the IDSEL (dev 3) of the slot, the table is adjusted for the
+ * swizzle and INTA is connected to PIRQH so PINA/B/C/D on
+ * off-chip devices should get mapped to PIRQH/E/F/G.
+ */
+static const struct pirq_struct mainboard_pirq_data[] = {
+ /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */
+ {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */
+ {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 04.0 */
+ {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe bdg: 06.0 */
+ {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */
+ {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */
+ {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */
+ {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */
+ {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */
+ {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */
+ {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 14.1 */
+ {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */
+ {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI bdg: 14.4 */
+ {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */
+ {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */
+ {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */
+};
+
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+ pirq_data_ptr = mainboard_pirq_data;
+ pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
+ intr_data_ptr = mainboard_intr_data;
+ picr_data_ptr = mainboard_picr_data;
+}
+
+/**
+ * TODO
+ * SB CIMx callback
+ */
+void set_pcie_reset(void)
+{
+}
+
+/**
+ * TODO
+ * mainboard specific SB CIMx callback
+ */
+void set_pcie_dereset(void)
+{
+}
+
+
+/**********************************************
+ * Enable the dedicated functions of the board.
+ **********************************************/
+static void mainboard_enable(device_t dev)
+{
+ printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+
+ /* enable GPP CLK0 thru CLK1 */
+ /* disable GPP CLK2 thru SLT_GFX_CLK */
+ u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
+ write8(misc_mem_clk_cntrl + 0, 0xFF);
+ write8(misc_mem_clk_cntrl + 1, 0x00);
+ write8(misc_mem_clk_cntrl + 2, 0x00);
+ write8(misc_mem_clk_cntrl + 3, 0x00);
+ write8(misc_mem_clk_cntrl + 4, 0x00);
+
+ /*
+ * Initialize ASF registers to an arbitrary address because someone
+ * long ago set things up this way inside the SPD read code. The
+ * SPD read code has been made generic and moved out of the board
+ * directory, so the ASF init is being done here.
+ */
+ pm_iowrite(0x29, 0x80);
+ pm_iowrite(0x28, 0x61);
+
+ /* Initialize the PIRQ data structures for consumption */
+ pirq_setup();
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/elmex/pcm205401/mptable.c b/src/mainboard/elmex/pcm205401/mptable.c
new file mode 100644
index 0000000..8e954cd
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/mptable.c
@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam14.h>
+#include <SBPLATFORM.h>
+#include <southbridge/amd/common/amd_pci_util.h>
+#include <drivers/generic/ioapic/chip.h>
+#include <arch/ioapic.h>
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+
+ /*
+ * By the time this function gets called, the IOAPIC registers
+ * have been written so they can be read to get the correct
+ * APIC ID and Version
+ */
+ u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
+ u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
+
+ /* Intialize the MP_Table */
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+
+ /*
+ * Type 0: Processor Entries:
+ * LAPIC ID, LAPIC Version, CPU Flags:EN/BP,
+ * CPU Signature (Stepping, Model, Family),
+ * Feature Flags
+ */
+ smp_write_processors(mc);
+
+ /*
+ * Type 1: Bus Entries:
+ * Bus ID, Bus Type
+ */
+ mptable_write_buses(mc, NULL, &bus_isa);
+
+ /*
+ * Type 2: I/O APICs:
+ * APIC ID, Version, APIC Flags:EN, Address
+ */
+ smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
+
+ /*
+ * Type 3: I/O Interrupt Table Entries:
+ * Int Type, Int Polarity, Int Level, Source Bus ID,
+ * Source Bus IRQ, Dest APIC ID, Dest PIN#
+ */
+ mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, fn, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin))
+
+ /* APU Internal Graphic Device */
+ PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]);
+
+ /* SMBUS / ACPI */
+ PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]);
+
+ /* Southbridge HD Audio */
+ PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]);
+
+ /* LPC */
+ PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]);
+
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]);
+ PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]);
+ PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]);
+ PCI_INT(0x0, 0x14, 0x5, intr_data_ptr[PIRQ_OHCI4]);
+
+ /* IDE */
+ PCI_INT(0x0, 0x14, 0x1, intr_data_ptr[PIRQ_IDE]);
+
+ /* SATA */
+ PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]);
+
+ /* on board NIC & Slot PCIE */
+ PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
+ PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_E]); /* Use INTE */
+
+ /* PCI slots */
+ device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
+ if (dev && dev->enabled) {
+ u8 bus_pci = dev->link_list->secondary;
+ /* PCI_SLOT 0 */
+ PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */
+ PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */
+ PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */
+ PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
+ }
+
+ /* PCIe PortA */
+ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_E]); /* INTA -> INTE */
+ /* PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_F]); /* INTB -> INTF */
+ /* PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_G]); /* INTC -> INTG */
+ /* PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_H]); /* INTD -> INTH */
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+ IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/elmex/pcm205401/platform_cfg.h b/src/mainboard/elmex/pcm205401/platform_cfg.h
new file mode 100644
index 0000000..660be41
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/platform_cfg.h
@@ -0,0 +1,254 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#ifndef _PLATFORM_CFG_H_
+#define _PLATFORM_CFG_H_
+
+/**
+ * @def BIOS_SIZE
+ * BIOS_SIZE_{1,2,4,8,16}M
+ *
+ * In SB800, default ROM size is 1M Bytes, if your platform ROM
+ * bigger than 1M you have to set the ROM size outside CIMx module and
+ * before AGESA module get call.
+ */
+#ifndef BIOS_SIZE
+#define BIOS_SIZE ((CONFIG_COREBOOT_ROMSIZE_KB >> 10) - 1)
+#endif /* BIOS_SIZE */
+
+/**
+ * @def SPREAD_SPECTRUM
+ * @brief
+ * 0 - Disable Spread Spectrum function
+ * 1 - Enable Spread Spectrum function
+ */
+#define SPREAD_SPECTRUM 0
+
+/**
+ * @def SB_HPET_TIMER
+ * @brief
+ * 0 - Disable hpet
+ * 1 - Enable hpet
+ */
+#define HPET_TIMER 1
+
+/**
+ * @def USB_CONFIG
+ * @brief bit[0-6] used to control USB
+ * 0 - Disable
+ * 1 - Enable
+ * Usb Ohci1 Controller (Bus 0 Dev 18 Func0) is define at BIT0
+ * Usb Ehci1 Controller (Bus 0 Dev 18 Func2) is define at BIT1
+ * Usb Ohci2 Controller (Bus 0 Dev 19 Func0) is define at BIT2
+ * Usb Ehci2 Controller (Bus 0 Dev 19 Func2) is define at BIT3
+ * Usb Ohci3 Controller (Bus 0 Dev 22 Func0) is define at BIT4
+ * Usb Ehci3 Controller (Bus 0 Dev 22 Func2) is define at BIT5
+ * Usb Ohci4 Controller (Bus 0 Dev 20 Func5) is define at BIT6
+ */
+#define USB_CONFIG 0x7F
+
+/**
+ * @def PCI_CLOCK_CTRL
+ * @brief bit[0-4] used for PCI Slots Clock Control,
+ * 0 - disable
+ * 1 - enable
+ * PCI SLOT 0 define at BIT0
+ * PCI SLOT 1 define at BIT1
+ * PCI SLOT 2 define at BIT2
+ * PCI SLOT 3 define at BIT3
+ * PCI SLOT 4 define at BIT4
+ */
+#define PCI_CLOCK_CTRL 0x07
+
+/**
+ * @def SATA_CONTROLLER
+ * @brief INCHIP Sata Controller
+ */
+#define SATA_CONTROLLER CIMX_OPTION_ENABLED
+
+/**
+ * @def SATA_MODE
+ * @brief INCHIP Sata Controller Mode
+ * NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#define SATA_MODE CONFIG_SB800_SATA_MODE
+
+/**
+ * @brief INCHIP Sata IDE Controller Mode
+ */
+#define IDE_LEGACY_MODE 0
+#define IDE_NATIVE_MODE 1
+
+/**
+ * @def SATA_IDE_MODE
+ * @brief INCHIP Sata IDE Controller Mode
+ * NOTE: DO NOT ALLOW SATA & IDE use same mode
+ */
+#define SATA_IDE_MODE IDE_LEGACY_MODE
+
+/**
+ * @def EXTERNAL_CLOCK
+ * @brief 00/10: Reference clock from crystal oscillator via
+ * PAD_XTALI and PAD_XTALO
+ *
+ * @def INTERNAL_CLOCK
+ * @brief 01/11: Reference clock from internal clock through
+ * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL
+ */
+#define EXTERNAL_CLOCK 0x00
+#define INTERNAL_CLOCK 0x01
+
+/* NOTE: inagua have to using internal clock,
+ * otherwise can not detect sata drive
+ */
+#define SATA_CLOCK_SOURCE INTERNAL_CLOCK
+
+/**
+ * @def SATA_PORT_MULT_CAP_RESERVED
+ * @brief 1 ON, 0 0FF
+ */
+#define SATA_PORT_MULT_CAP_RESERVED 1
+
+
+/**
+ * @def AZALIA_AUTO
+ * @brief Detect Azalia controller automatically.
+ *
+ * @def AZALIA_DISABLE
+ * @brief Disable Azalia controller.
+
+ * @def AZALIA_ENABLE
+ * @brief Enable Azalia controller.
+ */
+#define AZALIA_AUTO 0
+#define AZALIA_DISABLE 1
+#define AZALIA_ENABLE 2
+
+/**
+ * @brief INCHIP HDA controller
+ */
+#define AZALIA_CONTROLLER AZALIA_AUTO
+
+/**
+ * @def AZALIA_PIN_CONFIG
+ * @brief
+ * 0 - disable
+ * 1 - enable
+ */
+#define AZALIA_PIN_CONFIG 1
+
+/**
+ * @def AZALIA_SDIN_PIN
+ * @brief
+ * SDIN0 is define at BIT0 & BIT1
+ * 00 - GPIO PIN
+ * 01 - Reserved
+ * 10 - As a Azalia SDIN pin
+ * SDIN1 is define at BIT2 & BIT3
+ * SDIN2 is define at BIT4 & BIT5
+ * SDIN3 is define at BIT6 & BIT7
+ */
+//#define AZALIA_SDIN_PIN 0xAA
+#define AZALIA_SDIN_PIN 0x2A
+
+/**
+ * @def GPP_CONTROLLER
+ */
+#define GPP_CONTROLLER CIMX_OPTION_ENABLED
+
+/**
+ * @def GPP_CFGMODE
+ * @brief GPP Link Configuration
+ * four possible configuration:
+ * GPP_CFGMODE_X4000
+ * GPP_CFGMODE_X2200
+ * GPP_CFGMODE_X2110
+ * GPP_CFGMODE_X1111
+ */
+#define GPP_CFGMODE GPP_CFGMODE_X1111
+
+/**
+ * @def NB_SB_GEN2
+ * 0 - Disable
+ * 1 - Enable
+ */
+#define NB_SB_GEN2 TRUE
+
+/**
+ * @def SB_GPP_GEN2
+ * 0 - Disable
+ * 1 - Enable
+ */
+#define SB_GPP_GEN2 TRUE
+
+/**
+ * @def SB_GPP_UNHIDE_PORTS
+ * TRUE - ports visible always, even port empty
+ * FALSE - ports invisible if port empty
+ */
+#define SB_GPP_UNHIDE_PORTS FALSE
+
+/**
+ * @def GEC_CONFIG
+ * 0 - Enable
+ * 1 - Disable
+ */
+#define GEC_CONFIG 0
+
+static const CODECENTRY persimmon_codec_alc269[] =
+{
+ /* NID, PinConfig */
+ {0x12, 0x411111F0},
+ {0x14, 0x99130110},
+ {0x21, 0x0121401F},
+ {0x17, 0x411111F0},
+ {0x18, 0x01A19820},
+ {0x19, 0x411111F0},
+ {0x1A, 0x0181302F},
+ {0x1B, 0x411111F0},
+ {0x1D, 0x40069E05},
+ {0x1E, 0x411111F0},
+ {0x20, 0x0001FFFF},
+ {0xff, 0xffffffff} /* end of table */
+};
+
+static const CODECTBLLIST codec_tablelist[] =
+{
+ {0x010ec0269, (CODECENTRY*)&persimmon_codec_alc269[0]},
+ {0x0FFFFFFFFUL, (CODECENTRY*)0x0FFFFFFFFUL}
+};
+
+/**
+ * @def AZALIA_OEM_VERB_TABLE
+ * Mainboard specific codec verb table list
+ */
+#define AZALIA_OEM_VERB_TABLE (&codec_tablelist[0])
+
+/* set up an ACPI preferred power management profile */
+/* from acpi.h
+ * PM_UNSPECIFIED = 0,
+ * PM_DESKTOP = 1,
+ * PM_MOBILE = 2,
+ * PM_WORKSTATION = 3,
+ * PM_ENTERPRISE_SERVER = 4,
+ * PM_SOHO_SERVER = 5,
+ * PM_APPLIANCE_PC = 6,
+ * PM_PERFORMANCE_SERVER = 7,
+ * PM_TABLET = 8
+ */
+#define FADT_PM_PROFILE 1
+
+#endif /* _PLATFORM_CFG_H_ */
diff --git a/src/mainboard/elmex/pcm205401/romstage.c b/src/mainboard/elmex/pcm205401/romstage.c
new file mode 100644
index 0000000..0aad4f5
--- /dev/null
+++ b/src/mainboard/elmex/pcm205401/romstage.c
@@ -0,0 +1,111 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <commonlib/loglevel.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/amd/car.h>
+#include <northbridge/amd/agesa/agesawrapper.h>
+#include <cpu/x86/bist.h>
+#include <superio/fintek/common/fintek.h>
+#include <superio/fintek/f81865f/f81865f.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/cache.h>
+#include <sb_cimx.h>
+#include "SBPLATFORM.h"
+#include "cbmem.h"
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/agesa/s3_resume.h>
+
+
+#define SERIAL_DEV PNP_DEV(0x4e, F81865F_SP1)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ u32 val;
+
+ /*
+ * All cores: allow caching of flash chip code and data
+ * (there are no cache-as-ram reliability concerns with family 14h)
+ */
+ __writemsr (0x20c, (0x0100000000ull - CACHE_ROM_SIZE) | 5);
+ __writemsr (0x20d, (0x1000000000ull - CACHE_ROM_SIZE) | 0x800);
+
+ /* All cores: set pstate 0 (1600 MHz) early to save a few ms of boot time */
+ __writemsr (0xc0010062, 0);
+
+ amd_initmmio();
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ post_code(0x30);
+ sb_Poweron_Init();
+
+ post_code(0x31);
+ fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ console_init();
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ /* Load MPB */
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
+
+ post_code(0x37);
+ agesawrapper_amdinitreset();
+
+ post_code(0x39);
+ agesawrapper_amdinitearly();
+
+ int s3resume = acpi_is_wakeup_s3();
+ if (!s3resume) {
+ post_code(0x40);
+ agesawrapper_amdinitpost();
+
+ post_code(0x42);
+ agesawrapper_amdinitenv();
+ amd_initenv();
+
+ } else { /* S3 detect */
+ printk(BIOS_INFO, "S3 detected\n");
+
+ post_code(0x60);
+ agesawrapper_amdinitresume();
+
+ agesawrapper_amds3laterestore();
+
+ post_code(0x61);
+ prepare_for_resume();
+ }
+
+ post_code(0x50);
+ copy_and_run();
+ printk(BIOS_ERR, "Error: copy_and_run() returned!\n");
+
+ post_code(0x54); /* Should never see this post code. */
+}
More information about the coreboot-gerrit
mailing list