[coreboot-gerrit] Patch merged into coreboot/master: mainboard/amd: add support for F2950 system board
gerrit at coreboot.org
gerrit at coreboot.org
Sun Jul 17 16:50:39 CEST 2016
the following patch was just integrated into master:
commit d83b0e9ac4174cca92ac2c3b83a7e8491a9a1ff4
Author: Andrey Korolyov <andrey at xdel.ru>
Date: Fri Jul 1 20:06:37 2016 +0300
mainboard/amd: add support for F2950 system board
F2950 SBC, also known as TONK 1201/TONK 1202, was originally
produced as a Centerm F2950 using DB800 reference design. Common
configuration does include a 600 MHz GeodeLX CPU underclocked to
500 or 400 MHz, 128 or 512 MiB of RAM in the single SODIMM slot and
128 or 512 MB IDE DOM. The board does have three USB 2.0 ports
(none of them possessing debug capabilities), PS/2, VGA, Geode
audio in/out and the serial port.
EEPROM needs to be soldered out and flashed externally at the time
of this message because flashrom would neither be able to dump BIOS
correctly while running vendor BIOS nor write flash contents.
All peripherals were tested against Linux 3.16 and seem to work
flawlessly. At the moment of this commit coreboot does not pass
PCI_COMMAND_IO from the configuration space to SeaBIOS, thereby
preventing VGA OPROM from being executed. This would be fixed in
the SeaBIOS itself or in a subsequent commit. As a workaround,
user may put VGA OPROM to vgaroms/seavgabios.bin in CBFS.
Signed-off-by: Andrey Korolyov <andrey at xdel.ru>
Change-Id: I93f13ecb53bd05abc0e07e0bd7ba40e646dcb4c4
Reviewed-on: https://review.coreboot.org/15565
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki at gmail.com>
See https://review.coreboot.org/15565 for details.
-gerrit
More information about the coreboot-gerrit
mailing list