[coreboot-gerrit] Patch set updated for coreboot: kontron/ktqm77: Tag all four USB3 ports switchable and SS capable
Nico Huber (nico.h@gmx.de)
gerrit at coreboot.org
Sat Oct 17 00:54:31 CEST 2015
Nico Huber (nico.h at gmx.de) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/11287
-gerrit
commit d1b69ecdfbedcba52337fc6aecdea3cb8b84265f
Author: Nico Huber <nico.huber at secunet.com>
Date: Wed Aug 19 15:46:13 2015 +0200
kontron/ktqm77: Tag all four USB3 ports switchable and SS capable
With the introduction of these options in commit b26156e
(bd82x6x/xhci: Set mask of ports switchable between USB2 and USB3.)
the default regressed to disable these capabilities. Maybe other boards
regressed too. I didn't check.
Change-Id: I220896e656d00145618e61d55b74904517c7d855
Signed-off-by: Nico Huber <nico.huber at secunet.com>
---
src/mainboard/kontron/ktqm77/devicetree.cb | 3 +++
1 file changed, 3 insertions(+)
diff --git a/src/mainboard/kontron/ktqm77/devicetree.cb b/src/mainboard/kontron/ktqm77/devicetree.cb
index b916b0b..ff5d012 100644
--- a/src/mainboard/kontron/ktqm77/devicetree.cb
+++ b/src/mainboard/kontron/ktqm77/devicetree.cb
@@ -44,6 +44,9 @@ chip northbridge/intel/sandybridge
register "c2_latency" = "101" # c2 not supported
register "p_cnt_throttling_supported" = "1"
+ register "xhci_switchable_ports" = "0x0f"
+ register "superspeed_capable_ports" = "0x0f"
+
device pci 14.0 on end # USB 3.0 Controller
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
More information about the coreboot-gerrit
mailing list