[coreboot-gerrit] New patch to review for coreboot: ultra40m2: document some SMBus devices in the devicetree

[Jonathan A. Kollasch (jakllsch@kollasch.net)]

Jonathan A. Kollasch (jakllsch at kollasch.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12310

-gerrit

commit af43619b8b28995ff65908c2b35bc12e00cd5b8a
Author: Jonathan A. Kollasch <jakllsch at kollasch.net>
Date:   Tue Nov 3 12:22:53 2015 -0600

    ultra40m2: document some SMBus devices in the devicetree
    
    Change-Id: I04c37e363d48add5502b801d522e828265b87d58
    Signed-off-by: Jonathan A. Kollasch <jakllsch at kollasch.net>
---
 src/mainboard/sunw/ultra40m2/devicetree.cb | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/src/mainboard/sunw/ultra40m2/devicetree.cb b/src/mainboard/sunw/ultra40m2/devicetree.cb
index dd28d0f..d61dd17 100644
--- a/src/mainboard/sunw/ultra40m2/devicetree.cb
+++ b/src/mainboard/sunw/ultra40m2/devicetree.cb
@@ -71,12 +71,25 @@ chip northbridge/amd/amdk8/root_complex		# Root complex
             end
           end
           device pci 1.1 on			# SM 1
+            #chip drivers/generic/generic	# PCA9556 GPIO on HDD backplanes (address conflict!)
+            #  device i2c 18 on end
+            #end
             chip drivers/generic/generic	# EMC6D103 HWM (for CPUs)
               device i2c 2d on end
             end
             chip drivers/generic/generic	# DME1737 HWM
               device i2c 2e on end
             end
+            #chip drivers/generic/generic	# HDD 4-7 backplane FRU 24C64 EEPROM
+            #  device i2c 51 on end
+            #end
+            #chip drivers/generic/generic	# front panel module FRU 24C64 EEPROM
+            #  device i2c 52 on end
+            #end
+            #chip drivers/generic/generic	# HDD 0-3 backplane FRU 24C64 EEPROM
+            #  device i2c 53 on end
+            #end
+            # there are more SMbus devices on this bus
           end
           device pci 2.0 on end			# USB 1.1
           device pci 2.1 on end			# USB 2