[coreboot-gerrit] New patch to review for coreboot: be7c905 kbuild: clean up drivers/
Stefan Reinauer (stefan.reinauer@coreboot.org)
gerrit at coreboot.org
Wed Apr 22 01:29:13 CEST 2015
Stefan Reinauer (stefan.reinauer at coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/9941
-gerrit
commit be7c90558f1c993531aa00f175cb1bc4ffa24f87
Author: Stefan Reinauer <reinauer at chromium.org>
Date: Tue Apr 21 16:26:05 2015 -0700
kbuild: clean up drivers/
WIP WIP WIP
Change-Id: I815db91fcddc88ef6561fb0ed9651e7a505725d6
Signed-off-by: Stefan Reinauer <stefan.reinauer at coreboot.org>
---
Makefile.inc | 4 +-
src/drivers/ati/Kconfig | 1 -
src/drivers/ati/Makefile.inc | 1 -
src/drivers/dec/21143/Makefile.inc | 4 +
src/drivers/dec/Kconfig | 1 -
src/drivers/dec/Makefile.inc | 1 -
src/drivers/emulation/Kconfig | 2 -
src/drivers/emulation/Makefile.inc | 1 -
src/drivers/generic/Kconfig | 2 -
src/drivers/generic/Makefile.inc | 2 -
src/drivers/i2c/Kconfig | 10 -
src/drivers/i2c/Makefile.inc | 11 -
src/drivers/ics/Kconfig | 1 -
src/drivers/ics/Makefile.inc | 1 -
src/drivers/intel/Kconfig | 21 --
src/drivers/intel/Makefile.inc | 4 -
src/drivers/intel/fsp/Makefile.inc | 4 +
src/drivers/intel/i210/Makefile.inc | 6 +-
src/drivers/maxim/Kconfig | 20 --
src/drivers/maxim/Makefile.inc | 20 --
src/drivers/parade/Kconfig | 20 --
src/drivers/parade/Makefile.inc | 20 --
src/drivers/pc80/Kconfig | 26 ---
src/drivers/pc80/Makefile.inc | 24 --
src/drivers/pc80/i8254.c | 55 -----
src/drivers/pc80/i8259.c | 142 ------------
src/drivers/pc80/isa-dma.c | 44 ----
src/drivers/pc80/keyboard.c | 330 ---------------------------
src/drivers/pc80/mc146818rtc.c | 380 -------------------------------
src/drivers/pc80/mc146818rtc_early.c | 104 ---------
src/drivers/pc80/pc/Kconfig | 18 ++
src/drivers/pc80/pc/Makefile.inc | 11 +
src/drivers/pc80/pc/i8254.c | 55 +++++
src/drivers/pc80/pc/i8259.c | 142 ++++++++++++
src/drivers/pc80/pc/isa-dma.c | 44 ++++
src/drivers/pc80/pc/keyboard.c | 330 +++++++++++++++++++++++++++
src/drivers/pc80/pc/ps2_controller.asl | 51 +++++
src/drivers/pc80/pc/spkmodem.c | 128 +++++++++++
src/drivers/pc80/pc/udelay_io.c | 13 ++
src/drivers/pc80/ps2_controller.asl | 51 -----
src/drivers/pc80/rtc/Kconfig | 4 +
src/drivers/pc80/rtc/Makefile.inc | 12 +
src/drivers/pc80/rtc/mc146818rtc.c | 380 +++++++++++++++++++++++++++++++
src/drivers/pc80/rtc/mc146818rtc_early.c | 104 +++++++++
src/drivers/pc80/spkmodem.c | 128 -----------
src/drivers/pc80/tpm/Makefile.inc | 4 +
src/drivers/pc80/udelay_io.c | 13 --
src/drivers/pc80/vga/Makefile.inc | 4 +
src/drivers/ricoh/Kconfig | 1 -
src/drivers/sil/Kconfig | 8 -
src/drivers/sil/Makefile.inc | 1 -
src/drivers/ti/Kconfig | 21 --
src/drivers/ti/Makefile.inc | 22 --
src/drivers/trident/Kconfig | 2 -
src/drivers/trident/Makefile.inc | 1 -
src/drivers/xgi/Kconfig | 2 -
src/drivers/xgi/Makefile.inc | 1 -
src/drivers/xpowers/Kconfig | 1 -
src/drivers/xpowers/Makefile.inc | 1 -
src/drivers/xpowers/axp209/Makefile.inc | 10 +-
60 files changed, 1323 insertions(+), 1502 deletions(-)
diff --git a/Makefile.inc b/Makefile.inc
index ed5a9f4..cc4effe 100644
--- a/Makefile.inc
+++ b/Makefile.inc
@@ -55,7 +55,9 @@ PHONY+= clean-abuild coreboot lint lint-stable build-dirs
subdirs-y := src/lib src/console src/device
subdirs-y += src/ec/acpi $(wildcard src/ec/*/*) $(wildcard src/southbridge/*/*)
subdirs-y += $(wildcard src/soc/*/*) $(wildcard src/northbridge/*/*)
-subdirs-y += src/superio $(wildcard src/drivers/*) src/cpu src/vendorcode
+subdirs-y += src/superio
+subdirs-y += $(wildcard src/drivers/*) $(wildcard src/drivers/*/*)
+subdirs-y += src/cpu src/vendorcode
subdirs-y += util/cbfstool util/sconfig util/nvramtool
subdirs-y += $(wildcard src/arch/*)
subdirs-y += src/mainboard/$(MAINBOARDDIR)
diff --git a/src/drivers/ati/Kconfig b/src/drivers/ati/Kconfig
deleted file mode 100644
index f1ea32c..0000000
--- a/src/drivers/ati/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-source src/drivers/ati/ragexl/Kconfig
diff --git a/src/drivers/ati/Makefile.inc b/src/drivers/ati/Makefile.inc
deleted file mode 100644
index 15b5dfc..0000000
--- a/src/drivers/ati/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-subdirs-y += ragexl
diff --git a/src/drivers/dec/21143/Makefile.inc b/src/drivers/dec/21143/Makefile.inc
index e99dfad..b7382e4 100644
--- a/src/drivers/dec/21143/Makefile.inc
+++ b/src/drivers/dec/21143/Makefile.inc
@@ -1 +1,5 @@
+ifeq ($(CONFIG_DRIVERS_DEC_21143),y)
+
ramstage-y += 21143.c
+
+endif
diff --git a/src/drivers/dec/Kconfig b/src/drivers/dec/Kconfig
deleted file mode 100644
index c9dfe64..0000000
--- a/src/drivers/dec/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-source src/drivers/dec/21143/Kconfig
diff --git a/src/drivers/dec/Makefile.inc b/src/drivers/dec/Makefile.inc
deleted file mode 100644
index 196c424..0000000
--- a/src/drivers/dec/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-subdirs-$(CONFIG_DRIVERS_DEC_21143) += 21143
diff --git a/src/drivers/emulation/Kconfig b/src/drivers/emulation/Kconfig
deleted file mode 100644
index 3da9f38..0000000
--- a/src/drivers/emulation/Kconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-source src/drivers/emulation/qemu/Kconfig
-
diff --git a/src/drivers/emulation/Makefile.inc b/src/drivers/emulation/Makefile.inc
deleted file mode 100644
index c1c92cd..0000000
--- a/src/drivers/emulation/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-subdirs-y += qemu
diff --git a/src/drivers/generic/Kconfig b/src/drivers/generic/Kconfig
deleted file mode 100644
index 3317fd1..0000000
--- a/src/drivers/generic/Kconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-source src/drivers/generic/generic/Kconfig
-source src/drivers/generic/ioapic/Kconfig
diff --git a/src/drivers/generic/Makefile.inc b/src/drivers/generic/Makefile.inc
deleted file mode 100644
index a099a31..0000000
--- a/src/drivers/generic/Makefile.inc
+++ /dev/null
@@ -1,2 +0,0 @@
-subdirs-y += generic
-subdirs-y += ioapic
diff --git a/src/drivers/i2c/Kconfig b/src/drivers/i2c/Kconfig
deleted file mode 100644
index 5c55c44..0000000
--- a/src/drivers/i2c/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-source src/drivers/i2c/adm1026/Kconfig
-source src/drivers/i2c/adm1027/Kconfig
-source src/drivers/i2c/adt7463/Kconfig
-source src/drivers/i2c/i2cmux/Kconfig
-source src/drivers/i2c/i2cmux2/Kconfig
-source src/drivers/i2c/lm63/Kconfig
-source src/drivers/i2c/rtd2132/Kconfig
-source src/drivers/i2c/tpm/Kconfig
-source src/drivers/i2c/w83795/Kconfig
-source src/drivers/i2c/w83793/Kconfig
diff --git a/src/drivers/i2c/Makefile.inc b/src/drivers/i2c/Makefile.inc
deleted file mode 100644
index 81ca409..0000000
--- a/src/drivers/i2c/Makefile.inc
+++ /dev/null
@@ -1,11 +0,0 @@
-subdirs-y += adm1026
-subdirs-y += adm1027
-subdirs-y += adt7463
-subdirs-y += i2cmux
-subdirs-y += i2cmux2
-subdirs-y += lm63
-subdirs-y += rtd2132
-subdirs-y += tpm
-subdirs-y += w83795
-subdirs-y += w83793
-subdirs-y += at24rf08c
diff --git a/src/drivers/ics/Kconfig b/src/drivers/ics/Kconfig
deleted file mode 100644
index 0a0ba66..0000000
--- a/src/drivers/ics/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-source src/drivers/ics/954309/Kconfig
diff --git a/src/drivers/ics/Makefile.inc b/src/drivers/ics/Makefile.inc
deleted file mode 100644
index 39cc90b..0000000
--- a/src/drivers/ics/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-subdirs-$(CONFIG_DRIVERS_ICS_954309) += 954309
diff --git a/src/drivers/intel/Kconfig b/src/drivers/intel/Kconfig
deleted file mode 100644
index 511cf5c..0000000
--- a/src/drivers/intel/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2013 Google Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-source src/drivers/intel/gma/Kconfig
-source src/drivers/intel/i210/Kconfig
diff --git a/src/drivers/intel/Makefile.inc b/src/drivers/intel/Makefile.inc
deleted file mode 100644
index dba81b5..0000000
--- a/src/drivers/intel/Makefile.inc
+++ /dev/null
@@ -1,4 +0,0 @@
-subdirs-y += gma
-subdirs-y += wifi
-subdirs-$(CONFIG_PLATFORM_USES_FSP) += fsp
-subdirs-$(CONFIG_DRIVER_INTEL_I210) += i210
diff --git a/src/drivers/intel/fsp/Makefile.inc b/src/drivers/intel/fsp/Makefile.inc
index 71d676d..9244602 100644
--- a/src/drivers/intel/fsp/Makefile.inc
+++ b/src/drivers/intel/fsp/Makefile.inc
@@ -17,6 +17,8 @@
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
+ifeq ($(CONFIG_PLATFORM_USES_FSP),y)
+
ramstage-y += fsp_util.c hob.c
romstage-y += fsp_util.c hob.c
@@ -47,3 +49,5 @@ mrc.cache-file := $(obj)/mrc.cache
mrc.cache-position := $(CONFIG_MRC_CACHE_LOC)
mrc.cache-type := mrc_cache
endif
+
+endif
diff --git a/src/drivers/intel/i210/Makefile.inc b/src/drivers/intel/i210/Makefile.inc
index a1f15de..a696022 100644
--- a/src/drivers/intel/i210/Makefile.inc
+++ b/src/drivers/intel/i210/Makefile.inc
@@ -1 +1,5 @@
-ramstage-y += i210.c
\ No newline at end of file
+ifeq ($(CONFIG_DRIVER_INTEL_I210),y)
+
+ramstage-y += i210.c
+
+endif
diff --git a/src/drivers/maxim/Kconfig b/src/drivers/maxim/Kconfig
deleted file mode 100644
index f3805ab..0000000
--- a/src/drivers/maxim/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2012 The Chromium OS Authors.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-source src/drivers/maxim/max77686/Kconfig
diff --git a/src/drivers/maxim/Makefile.inc b/src/drivers/maxim/Makefile.inc
deleted file mode 100644
index 6447db8..0000000
--- a/src/drivers/maxim/Makefile.inc
+++ /dev/null
@@ -1,20 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2012 The Chromium OS Authors.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-subdirs-$(CONFIG_DRIVER_MAXIM_MAX77686) += max77686/
diff --git a/src/drivers/parade/Kconfig b/src/drivers/parade/Kconfig
deleted file mode 100644
index b4b2ac2..0000000
--- a/src/drivers/parade/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2013 Google Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-source src/drivers/parade/ps8625/Kconfig
diff --git a/src/drivers/parade/Makefile.inc b/src/drivers/parade/Makefile.inc
deleted file mode 100644
index efbd11d..0000000
--- a/src/drivers/parade/Makefile.inc
+++ /dev/null
@@ -1,20 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2013 Google Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-subdirs-$(CONFIG_DRIVER_PARADE_PS8625) += ps8625/
diff --git a/src/drivers/pc80/Kconfig b/src/drivers/pc80/Kconfig
deleted file mode 100644
index a1e94ab..0000000
--- a/src/drivers/pc80/Kconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-# Might be removed (alongside with the PS/2 init code) once payloads
-# reliably support PS/2 init themselves.
-if PC80_SYSTEM
-
-config DRIVERS_PS2_KEYBOARD
- bool "PS/2 keyboard init"
- default y
- help
- Enable this option to initialize PS/2 keyboards found connected
- to the PS/2 port.
-
- Some payloads (eg, filo) require this option. Other payloads
- (eg, GRUB 2, SeaBIOS, Linux) do not require it.
- Initializing a PS/2 keyboard can take several hundred milliseconds.
-
- If you know you will only use a payload which does not require
- this option, then you can say N here to speed up boot time.
- Otherwise say Y.
-
-config DRIVERS_MC146818
- bool
- default y if ARCH_X86
-
-source src/drivers/pc80/tpm/Kconfig
-
-endif
diff --git a/src/drivers/pc80/Makefile.inc b/src/drivers/pc80/Makefile.inc
deleted file mode 100644
index 0788cc7..0000000
--- a/src/drivers/pc80/Makefile.inc
+++ /dev/null
@@ -1,24 +0,0 @@
-ifeq ($(CONFIG_ARCH_X86),y)
-
-romstage-$(CONFIG_DRIVERS_MC146818) += mc146818rtc.c
-ramstage-$(CONFIG_DRIVERS_MC146818) += mc146818rtc.c
-ramstage-y += isa-dma.c
-ramstage-y += i8254.c
-ramstage-y += i8259.c
-ramstage-$(CONFIG_UDELAY_IO) += udelay_io.c
-ramstage-y += keyboard.c
-ramstage-$(CONFIG_SPKMODEM) += spkmodem.c
-
-romstage-$(CONFIG_DRIVERS_MC146818) += mc146818rtc_early.c
-
-romstage-$(CONFIG_SPKMODEM) += spkmodem.c
-
-subdirs-y += tpm vga
-
-cbfs-files-$(CONFIG_HAVE_CMOS_DEFAULT) += cmos.default
-cmos.default-file = $(CONFIG_CMOS_DEFAULT_FILE):nvramtool
-cmos.default-type = 0xaa
-
-smm-$(CONFIG_DRIVERS_MC146818) += mc146818rtc.c
-
-endif
diff --git a/src/drivers/pc80/i8254.c b/src/drivers/pc80/i8254.c
deleted file mode 100644
index 22ca809..0000000
--- a/src/drivers/pc80/i8254.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/io.h>
-#include <pc80/i8254.h>
-#include <console/console.h>
-
-/* Initialize i8254 timers */
-
-void setup_i8254(void)
-{
- /* Timer 0 (taken from biosemu) */
- outb(TIMER0_SEL|WORD_ACCESS|MODE3|BINARY_COUNT, TIMER_MODE_PORT);
- outb(0x00, TIMER0_PORT);
- outb(0x00, TIMER0_PORT);
-
- /* Timer 1 */
- outb(TIMER1_SEL|LOBYTE_ACCESS|MODE3|BINARY_COUNT, TIMER_MODE_PORT);
- outb(0x12, TIMER1_PORT);
-}
-
-#if CONFIG_UDELAY_TIMER2
-static void load_timer2(unsigned int ticks)
-{
- /* Set up the timer gate, turn off the speaker */
- outb((inb(PPC_PORTB) & ~PPCB_SPKR) | PPCB_T2GATE, PPC_PORTB);
- outb(TIMER2_SEL|WORD_ACCESS|MODE0|BINARY_COUNT, TIMER_MODE_PORT);
- outb(ticks & 0xFF, TIMER2_PORT);
- outb(ticks >> 8, TIMER2_PORT);
-}
-
-
-void udelay(int usecs)
-{
- load_timer2((usecs*TICKS_PER_MS)/1000);
- while ((inb(PPC_PORTB) & PPCB_T2OUT) == 0)
- ;
-}
-#endif
diff --git a/src/drivers/pc80/i8259.c b/src/drivers/pc80/i8259.c
deleted file mode 100644
index 9c43473..0000000
--- a/src/drivers/pc80/i8259.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 coresystems GmbH
- * Copyright (C) 2013 Sage Electronic Engineering, LLC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/io.h>
-#include <pc80/i8259.h>
-#include <console/console.h>
-
-/* Read the current PIC IRQ mask */
-u16 pic_read_irq_mask(void)
-{
- u16 mask;
- int i;
-
- mask = inb(MASTER_PIC_OCW1) | (inb(SLAVE_PIC_OCW1) << 8);
-
- printk(BIOS_DEBUG, "8259 PIC: OCW1 IRQ Mask: 0x%x\n", mask);
- printk(BIOS_SPEW, "\tEnabled IRQs (0 = Unmasked, 1 = Masked off):\n"
- "\t\tMaster\t\tSlave\n");
- for(i = 0; i <= 7; i++) {
- printk(BIOS_SPEW, "\t\tIRQ%X: %x\t\tIRQ%X: %x\n",
- i, (mask >> i) & 1, i + 8, (mask >> (i + 8)) & 1);
- }
- return mask;
-}
-
-/*
- * Write an IRQ mask to the PIC:
- * IRQA is bit 0xA in the 16 bit bitmask (OCW1)
- */
-void pic_write_irq_mask(u16 mask)
-{
- outb(mask, MASTER_PIC_OCW1);
- outb(mask >> 8, SLAVE_PIC_OCW1);
-}
-
-/*
- * The PIC IRQs default to masked off
- * Allow specific IRQs to be enabled (1)
- * or disabled by (0) the user
- */
-void pic_irq_enable(u8 int_num, u8 mask)
-{
- pic_write_irq_mask(pic_read_irq_mask() & ~(mask << int_num));
- pic_read_irq_mask();
-}
-
-void setup_i8259(void)
-{
- /* A write to ICW1 starts the Interrupt Controller Initialization
- * Sequence. This implicitly causes the following to happen:
- * - Interrupt Mask register is cleared
- * - Priority 7 is assigned to IRQ7 input
- * - Slave mode address is set to 7
- * - Special mask mode is cleared
- *
- * We send the initialization sequence to both the master and
- * slave i8259 controller.
- */
- outb(ICW_SELECT|IC4, MASTER_PIC_ICW1);
- outb(ICW_SELECT|IC4, SLAVE_PIC_ICW1);
-
- /* Now the interrupt controller expects us to write to ICW2. */
- outb(INT_VECTOR_MASTER | IRQ0, MASTER_PIC_ICW2);
- outb(INT_VECTOR_SLAVE | IRQ8, SLAVE_PIC_ICW2);
-
- /* Now the interrupt controller expects us to write to ICW3.
- *
- * The normal scenario is to set up cascading on IRQ2 on the master
- * i8259 and assign the slave ID 2 to the slave i8259.
- */
- outb(CASCADED_PIC, MASTER_PIC_ICW3);
- outb(SLAVE_ID, SLAVE_PIC_ICW3);
-
- /* Now the interrupt controller expects us to write to ICW4.
- *
- * We switch both i8259 to microprocessor mode because they're
- * operating as part of an x86 architecture based chipset
- */
- outb(MICROPROCESSOR_MODE, MASTER_PIC_ICW2);
- outb(MICROPROCESSOR_MODE, SLAVE_PIC_ICW2);
-
- /* Now clear the interrupts through OCW1.
- * First we mask off all interrupts on the slave interrupt controller
- * then we mask off all interrupts but interrupt 2 on the master
- * controller. This way the cascading stays alive.
- */
- outb(ALL_IRQS, SLAVE_PIC_OCW1);
- outb(ALL_IRQS & ~IRQ2, MASTER_PIC_OCW1);
-}
-
-/**
- * @brief Configure IRQ triggering in the i8259 compatible Interrupt Controller.
- *
- * Switch a certain interrupt to be level / edge triggered.
- *
- * @param int_num legacy interrupt number (3-7, 9-15)
- * @param is_level_triggered 1 for level triggered interrupt, 0 for edge
- * triggered interrupt
- */
-void i8259_configure_irq_trigger(int int_num, int is_level_triggered)
-{
- u16 int_bits = inb(ELCR1) | (((u16)inb(ELCR2)) << 8);
-
- if (is_level_triggered)
- int_bits |= (1 << int_num);
- else
- int_bits &= ~(1 << int_num);
-
- /* Write new values */
- outb((u8)(int_bits & 0xff), ELCR1);
- outb((u8)(int_bits >> 8), ELCR2);
-
-#ifdef PARANOID_IRQ_TRIGGERS
- /* Try reading back the new values. This seems like an error but is not ... */
- if (inb(ELCR1) != (int_bits & 0xff)) {
- printk(BIOS_ERR, "%s: lower order bits are wrong: want 0x%x, got 0x%x\n",
- __func__, (int_bits & 0xff), inb(ELCR1));
- }
-
- if (inb(ELCR2) != (int_bits >> 8)) {
- printk(BIOS_ERR, "%s: higher order bits are wrong: want 0x%x, got 0x%x\n",
- __func__, (int_bits>>8), inb(ELCR2));
- }
-#endif
-}
diff --git a/src/drivers/pc80/isa-dma.c b/src/drivers/pc80/isa-dma.c
deleted file mode 100644
index b64f125..0000000
--- a/src/drivers/pc80/isa-dma.c
+++ /dev/null
@@ -1,44 +0,0 @@
-#include <arch/io.h>
-#include <pc80/isa-dma.h>
-
-/* DMA controller registers */
-#define DMA1_CMD_REG 0x08 /* command register (w) */
-#define DMA1_STAT_REG 0x08 /* status register (r) */
-#define DMA1_REQ_REG 0x09 /* request register (w) */
-#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
-#define DMA1_MODE_REG 0x0B /* mode register (w) */
-#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
-#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
-#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
-
-#define DMA2_CMD_REG 0xD0 /* command register (w) */
-#define DMA2_STAT_REG 0xD0 /* status register (r) */
-#define DMA2_REQ_REG 0xD2 /* request register (w) */
-#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
-#define DMA2_MODE_REG 0xD6 /* mode register (w) */
-#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
-#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
-#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
-
-#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT 0x10
-
-
-void isa_dma_init(void)
-{
- /* slave at 0x00 - 0x0f */
- /* master at 0xc0 - 0xdf */
- /* 0x80 - 0x8f DMA page registers */
- /* DMA: 0x00, 0x02, 0x4, 0x06 base address for DMA channel */
- outb(0, DMA1_RESET_REG);
- outb(0, DMA2_RESET_REG);
- outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
- outb(0, DMA2_MASK_REG);
-}
diff --git a/src/drivers/pc80/keyboard.c b/src/drivers/pc80/keyboard.c
deleted file mode 100644
index 06eae46..0000000
--- a/src/drivers/pc80/keyboard.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 coresystems GmbH
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2003 Ollie Lo <ollielo at hotmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <pc80/keyboard.h>
-#include <device/device.h>
-#include <arch/io.h>
-#include <delay.h>
-#include <types.h>
-#include <arch/acpi.h>
-
-#define KBD_DATA 0x60
-#define KBD_COMMAND 0x64
-#define KBD_STATUS 0x64
-#define KBD_IBF (1 << 1) // 1: input buffer full (data ready for ec)
-#define KBD_OBF (1 << 0) // 1: output buffer full (data ready for host)
-
-// Keyboard Controller Commands
-#define KBC_CMD_READ_COMMAND 0x20 // Read command byte
-#define KBC_CMD_WRITE_COMMAND 0x60 // Write command byte
-#define KBC_CMD_SELF_TEST 0xAA // Controller self-test
-#define KBC_CMD_KBD_TEST 0xAB // Keyboard Interface test
-
-/* The Keyboard controller command byte
- * BIT | Description
- * ----+-------------------------------------------------------
- * 7 | reserved, must be zero
- * 6 | XT Translation, (1 = on, 0 = off)
- * 5 | Disable Mouse Port (1 = disable, 0 = enable)
- * 4 | Disable Keyboard Port (1 = disable, 0 = enable)
- * 3 | reserved, must be zero
- * 2 | System Flag (1 = self-test passed. DO NOT SET TO ZERO)
- * 1 | Mouse Port Interrupts (1 = enable, 0 = disable)
- * 0 | Keyboard Port Interrupts (1 = enable, 0 = disable)
- */
-
-// Keyboard Controller Replies
-#define KBC_REPLY_SELFTEST_OK 0x55 // controller self-test succeeded
-
-//
-// Keyboard Replies
-//
-#define KBD_REPLY_POR 0xAA // Power on reset
-#define KBD_REPLY_ACK 0xFA // Command ACK
-#define KBD_REPLY_RESEND 0xFE // Command NACK, send command again
-
-/* Wait 400ms for keyboard controller answers */
-#define KBC_TIMEOUT_IN_MS 400
-
-static int kbc_input_buffer_empty(void)
-{
- u32 timeout;
- for (timeout = KBC_TIMEOUT_IN_MS;
- timeout && (inb(KBD_STATUS) & KBD_IBF); timeout--)
- mdelay(1);
-
- if (!timeout)
- printk(BIOS_WARNING,
- "Unexpected Keyboard controller input buffer full\n");
- return !!timeout;
-}
-
-static int kbc_output_buffer_full(void)
-{
- u32 timeout;
- for (timeout = KBC_TIMEOUT_IN_MS;
- timeout && ((inb(KBD_STATUS) & KBD_OBF) == 0); timeout--)
- mdelay(1);
-
- if (!timeout)
- printk(BIOS_INFO,
- "Keyboard controller output buffer result timeout\n");
- return !!timeout;
-}
-
-static int kbc_cleanup_buffers(void)
-{
- u32 timeout;
- for (timeout = KBC_TIMEOUT_IN_MS;
- timeout && (inb(KBD_STATUS) & (KBD_OBF | KBD_IBF)); timeout--) {
- mdelay(1);
- inb(KBD_DATA);
- }
-
- if (!timeout) {
- printk(BIOS_ERR,
- "Couldn't cleanup the keyboard controller buffers\n");
- printk(BIOS_ERR, "Status (0x%x): 0x%x, Buffer (0x%x): 0x%x\n",
- KBD_STATUS, inb(KBD_STATUS), KBD_DATA, inb(KBD_DATA));
- }
-
- return !!timeout;
-}
-
-static enum cb_err kbc_self_test(void)
-{
- u8 self_test;
-
- /* Clean up any junk that might have been in the KBC.
- * Both input and output buffers must be empty.
- */
- if (!kbc_cleanup_buffers())
- return CB_KBD_CONTROLLER_FAILURE;
-
- /* reset/self test 8042 - send cmd 0xAA */
- outb(KBC_CMD_SELF_TEST, KBD_COMMAND);
-
- if (!kbc_output_buffer_full()) {
- /* There probably is no keyboard controller. */
- printk(BIOS_ERR, "Could not reset keyboard controller.\n");
- return CB_KBD_CONTROLLER_FAILURE;
- }
-
- /* read self-test result, 0x55 is returned in the output buffer */
- self_test = inb(KBD_DATA);
-
- if (self_test != 0x55) {
- printk(BIOS_ERR, "Keyboard Controller self-test failed: 0x%x\n",
- self_test);
- return CB_KBD_CONTROLLER_FAILURE;
- }
-
- /* ensure the buffers are empty */
- kbc_cleanup_buffers();
-
- /* keyboard interface test */
- outb(KBC_CMD_KBD_TEST, KBD_COMMAND);
-
- if (!kbc_output_buffer_full()) {
- printk(BIOS_ERR, "Keyboard Interface test timed out.\n");
- return CB_KBD_CONTROLLER_FAILURE;
- }
-
- /* read test result, 0x00 should be returned in case of no failures */
- self_test = inb(KBD_DATA);
-
- if (self_test != 0x00) {
- printk(BIOS_ERR, "Keyboard Interface test failed: 0x%x\n",
- self_test);
- return CB_KBD_INTERFACE_FAILURE;
- }
-
- return CB_SUCCESS;
-}
-
-static u8 send_keyboard(u8 command)
-{
- u8 regval = 0;
- u8 resend = 10;
-
- do {
- if (!kbc_input_buffer_empty())
- return 0;
- outb(command, KBD_DATA);
- /* the reset command takes much longer then normal commands and
- * even worse, some keyboards do send the ACK _after_ doing the
- * reset */
- if (command == 0xFF) {
- u8 retries;
- for (retries = 9; retries && !kbc_output_buffer_full();
- retries--) ;
- }
- if (!kbc_output_buffer_full()) {
- printk(BIOS_ERR,
- "Could not send keyboard command %02x\n",
- command);
- return 0;
- }
- regval = inb(KBD_DATA);
- --resend;
- } while (regval == KBD_REPLY_RESEND && resend > 0);
-
- return regval;
-}
-
-void pc_keyboard_init(void)
-{
- u8 retries;
- u8 regval;
- enum cb_err err;
-
- if (!CONFIG_DRIVERS_PS2_KEYBOARD)
- return;
-
- if (acpi_is_wakeup_s3())
- return;
-
- printk(BIOS_DEBUG, "Keyboard init...\n");
-
- /* Run a keyboard controller self-test */
- err = kbc_self_test();
- /* Ignore iterface failure as it's non-fatal. */
- if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE)
- return;
-
- /* Enable keyboard interface - No IRQ */
- if (!kbc_input_buffer_empty())
- return;
- outb(0x60, KBD_COMMAND);
- if (!kbc_input_buffer_empty())
- return;
- outb(0x20, KBD_DATA); /* send cmd: enable keyboard */
- if (!kbc_input_buffer_empty()) {
- printk(BIOS_INFO, "Timeout while enabling keyboard\n");
- return;
- }
-
- /* clean up any junk that might have been in the keyboard */
- if (!kbc_cleanup_buffers())
- return;
-
- /* reset keyboard and self test (keyboard side) */
- regval = send_keyboard(0xFF);
- if (regval == KBD_REPLY_RESEND) {
- /* keeps sending RESENDs, probably no keyboard. */
- printk(BIOS_INFO, "No PS/2 keyboard detected.\n");
- return;
- }
-
- if (regval != KBD_REPLY_ACK) {
- printk(BIOS_ERR, "Keyboard reset failed ACK: 0x%x\n", regval);
- return;
- }
-
- /* the reset command takes some time, so wait a little longer */
- for (retries = 9; retries && !kbc_output_buffer_full(); retries--) ;
-
- if (!kbc_output_buffer_full()) {
- printk(BIOS_ERR, "Timeout waiting for keyboard after reset.\n");
- return;
- }
-
- regval = inb(KBD_DATA);
- if (regval != 0xAA) {
- printk(BIOS_ERR, "Keyboard reset selftest failed: 0x%x\n",
- regval);
- return;
- }
-
- /*
- * The following set scancode stuff is what normal BIOS do. It could be
- * argued that coreboot shouldn't set the scan code.....
- */
-
- /* disable the keyboard */
- regval = send_keyboard(0xF5);
- if (regval != KBD_REPLY_ACK) {
- printk(BIOS_ERR, "Keyboard disable failed ACK: 0x%x\n", regval);
- return;
- }
-
- /* Set scancode command */
- regval = send_keyboard(0xF0);
- if (regval != KBD_REPLY_ACK) {
- printk(BIOS_ERR, "Keyboard set scancode cmd failed ACK: 0x%x\n",
- regval);
- return;
- }
- /* Set scancode mode 2 */
- regval = send_keyboard(0x02);
- if (regval != KBD_REPLY_ACK) {
- printk(BIOS_ERR,
- "Keyboard set scancode mode failed ACK: 0x%x\n", regval);
- return;
- }
-
- /* All is well - enable keyboard interface */
- if (!kbc_input_buffer_empty())
- return;
- outb(0x60, KBD_COMMAND);
- if (!kbc_input_buffer_empty())
- return;
- outb(0x65, KBD_DATA); /* send cmd: enable keyboard and IRQ 1 */
- if (!kbc_input_buffer_empty()) {
- printk(BIOS_ERR, "Timeout during keyboard enable\n");
- return;
- }
-
- /* enable the keyboard */
- regval = send_keyboard(0xF4);
- if (regval != KBD_REPLY_ACK) {
- printk(BIOS_ERR, "Keyboard enable failed ACK: 0x%x\n", regval);
- return;
- }
-}
-
-/*
- * Support PS/2 mode - oddball SIOs(KBC) need this setup
- * Not well documented. Google - 0xcb keyboard controller
- * This is called before pc_keyboard_init().
- */
-void set_kbc_ps2_mode(void)
-{
- enum cb_err err;
-
- /* Run a keyboard controller self-test */
- err = kbc_self_test();
- /* Ignore iterface failure as it's non-fatal. */
- if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE)
- return;
-
- /* Support PS/2 mode */
- if (!kbc_input_buffer_empty())
- return;
- outb(0xcb, KBD_COMMAND);
-
- if (!kbc_input_buffer_empty())
- return;
- outb(0x01, KBD_DATA);
-
- kbc_cleanup_buffers();
-}
diff --git a/src/drivers/pc80/mc146818rtc.c b/src/drivers/pc80/mc146818rtc.c
deleted file mode 100644
index 4f034a2..0000000
--- a/src/drivers/pc80/mc146818rtc.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright 2014 The Chromium OS Authors. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <arch/acpi.h>
-#include <bcd.h>
-#include <stdint.h>
-#include <version.h>
-#include <console/console.h>
-#include <pc80/mc146818rtc.h>
-#include <boot/coreboot_tables.h>
-#include <rtc.h>
-#include <string.h>
-#include <cbfs.h>
-
-/* There's no way around this include guard. option_table.h is autogenerated */
-#if CONFIG_USE_OPTION_TABLE
-#include "option_table.h"
-#else
-#define LB_CKS_RANGE_START 0
-#define LB_CKS_RANGE_END 0
-#define LB_CKS_LOC 0
-#endif
-
-
-static void cmos_reset_date(void)
-{
- /* Now setup a default date equals to the build date */
- struct rtc_time time = {
- .sec = 0,
- .min = 0,
- .hour = 1,
- .mday = bcd2bin(coreboot_build_date.day),
- .mon = bcd2bin(coreboot_build_date.month),
- .year = (bcd2bin(coreboot_build_date.century) * 100) +
- bcd2bin(coreboot_build_date.year),
- .wday = bcd2bin(coreboot_build_date.weekday)
- };
- rtc_set(&time);
-}
-
-static int cmos_checksum_valid(int range_start, int range_end, int cks_loc)
-{
- if (IS_ENABLED(CONFIG_STATIC_OPTION_TABLE))
- return 1;
-
- int i;
- u16 sum, old_sum;
- sum = 0;
- for (i = range_start; i <= range_end; i++)
- sum += cmos_read(i);
- old_sum = ((cmos_read(cks_loc) << 8) | cmos_read(cks_loc + 1)) &
- 0x0ffff;
- return sum == old_sum;
-}
-
-static void cmos_set_checksum(int range_start, int range_end, int cks_loc)
-{
- int i;
- u16 sum;
- sum = 0;
- for (i = range_start; i <= range_end; i++)
- sum += cmos_read(i);
- cmos_write(((sum >> 8) & 0x0ff), cks_loc);
- cmos_write(((sum >> 0) & 0x0ff), cks_loc + 1);
-}
-
-#define RTC_CONTROL_DEFAULT (RTC_24H)
-#define RTC_FREQ_SELECT_DEFAULT (RTC_REF_CLCK_32KHZ | RTC_RATE_1024HZ)
-
-#ifndef __SMM__
-void cmos_init(bool invalid)
-{
- bool cmos_invalid = invalid;
- bool checksum_invalid = false;
- bool clear_cmos;
- size_t i;
- uint8_t x;
-
-#ifndef __PRE_RAM__
- /*
- * Avoid clearing pending interrupts and resetting the RTC control
- * register in the resume path because the Linux kernel relies on
- * this to know if it should restart the RTC timer queue if the wake
- * was due to the RTC alarm.
- */
- if (acpi_is_wakeup_s3())
- return;
-#endif /* __PRE_RAM__ */
-
- printk(BIOS_DEBUG, "RTC Init\n");
-
- if (IS_ENABLED(CONFIG_USE_OPTION_TABLE)) {
- /* See if there has been a CMOS power problem. */
- x = cmos_read(RTC_VALID);
- cmos_invalid = !(x & RTC_VRT);
-
- /* See if there is a CMOS checksum error */
- checksum_invalid = !cmos_checksum_valid(PC_CKS_RANGE_START,
- PC_CKS_RANGE_END, PC_CKS_LOC);
-
- clear_cmos = false;
- } else {
- clear_cmos = true;
- }
-
- if (invalid || cmos_invalid || checksum_invalid) {
- if (clear_cmos) {
- cmos_write(0, 0x01);
- cmos_write(0, 0x03);
- cmos_write(0, 0x05);
- for (i = 10; i < 128; i++)
- cmos_write(0, i);
- }
-
- if (cmos_invalid)
- cmos_reset_date();
-
- printk(BIOS_WARNING, "RTC:%s%s%s%s\n",
- invalid ? " Clear requested":"",
- cmos_invalid ? " Power Problem":"",
- checksum_invalid ? " Checksum invalid":"",
- clear_cmos ? " zeroing cmos":"");
- }
-
- /* Setup the real time clock */
- cmos_write(RTC_CONTROL_DEFAULT, RTC_CONTROL);
- /* Setup the frequency it operates at */
- cmos_write(RTC_FREQ_SELECT_DEFAULT, RTC_FREQ_SELECT);
- /* Ensure all reserved bits are 0 in register D */
- cmos_write(RTC_VRT, RTC_VALID);
-
- if (IS_ENABLED(CONFIG_USE_OPTION_TABLE)) {
- /* See if there is a LB CMOS checksum error */
- checksum_invalid = !cmos_checksum_valid(LB_CKS_RANGE_START,
- LB_CKS_RANGE_END,LB_CKS_LOC);
- if (checksum_invalid)
- printk(BIOS_DEBUG, "RTC: coreboot checksum invalid\n");
-
- /* Make certain we have a valid checksum */
- cmos_set_checksum(PC_CKS_RANGE_START, PC_CKS_RANGE_END, PC_CKS_LOC);
- }
-
- /* Clear any pending interrupts */
- cmos_read(RTC_INTR_FLAGS);
-}
-#endif /* __SMM__ */
-
-
-/*
- * This routine returns the value of the requested bits.
- * input bit = bit count from the beginning of the cmos image
- * length = number of bits to include in the value
- * ret = a character pointer to where the value is to be returned
- * returns CB_SUCCESS = successful, cb_err code if an error occurred
- */
-static enum cb_err get_cmos_value(unsigned long bit, unsigned long length,
- void *vret)
-{
- unsigned char *ret;
- unsigned long byte,byte_bit;
- unsigned long i;
- unsigned char uchar;
-
- /*
- * The table is checked when it is built to ensure all
- * values are valid.
- */
- ret = vret;
- byte = bit / 8; /* find the byte where the data starts */
- byte_bit = bit % 8; /* find the bit in the byte where the data starts */
- if (length < 9) { /* one byte or less */
- uchar = cmos_read(byte); /* load the byte */
- uchar >>= byte_bit; /* shift the bits to byte align */
- /* clear unspecified bits */
- ret[0] = uchar & ((1 << length) - 1);
- } else { /* more that one byte so transfer the whole bytes */
- for (i = 0; length; i++, length -= 8, byte++) {
- /* load the byte */
- ret[i] = cmos_read(byte);
- }
- }
- return CB_SUCCESS;
-}
-
-enum cb_err get_option(void *dest, const char *name)
-{
- struct cmos_option_table *ct;
- struct cmos_entries *ce;
- size_t namelen;
- int found = 0;
-
- if (!IS_ENABLED(CONFIG_USE_OPTION_TABLE))
- return CB_CMOS_OTABLE_DISABLED;
-
- /* Figure out how long name is */
- namelen = strnlen(name, CMOS_MAX_NAME_LENGTH);
-
- /* find the requested entry record */
- ct = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, "cmos_layout.bin",
- CBFS_COMPONENT_CMOS_LAYOUT, NULL);
- if (!ct) {
- printk(BIOS_ERR, "RTC: cmos_layout.bin could not be found. "
- "Options are disabled\n");
- return CB_CMOS_LAYOUT_NOT_FOUND;
- }
- ce = (struct cmos_entries*)((unsigned char *)ct + ct->header_length);
- for(; ce->tag == LB_TAG_OPTION;
- ce = (struct cmos_entries*)((unsigned char *)ce + ce->size)) {
- if (memcmp(ce->name, name, namelen) == 0) {
- found = 1;
- break;
- }
- }
- if (!found) {
- printk(BIOS_DEBUG, "WARNING: No CMOS option '%s'.\n", name);
- return CB_CMOS_OPTION_NOT_FOUND;
- }
-
- if (get_cmos_value(ce->bit, ce->length, dest) != CB_SUCCESS)
- return CB_CMOS_ACCESS_ERROR;
- if (!cmos_checksum_valid(LB_CKS_RANGE_START, LB_CKS_RANGE_END, LB_CKS_LOC))
- return CB_CMOS_CHECKSUM_INVALID;
- return CB_SUCCESS;
-}
-
-static enum cb_err set_cmos_value(unsigned long bit, unsigned long length,
- void *vret)
-{
- unsigned char *ret;
- unsigned long byte,byte_bit;
- unsigned long i;
- unsigned char uchar, mask;
- unsigned int chksum_update_needed = 0;
-
- ret = vret;
- byte = bit / 8; /* find the byte where the data starts */
- byte_bit = bit % 8; /* find the bit where the data starts */
- if (length <= 8) { /* one byte or less */
- mask = (1 << length) - 1;
- mask <<= byte_bit;
-
- uchar = cmos_read(byte);
- uchar &= ~mask;
- uchar |= (ret[0] << byte_bit);
- cmos_write(uchar, byte);
- if (byte >= LB_CKS_RANGE_START && byte <= LB_CKS_RANGE_END)
- chksum_update_needed = 1;
- } else { /* more that one byte so transfer the whole bytes */
- if (byte_bit || length % 8)
- return CB_ERR_ARG;
-
- for (i = 0; length; i++, length -= 8, byte++)
- cmos_write(ret[i], byte);
- if (byte >= LB_CKS_RANGE_START &&
- byte <= LB_CKS_RANGE_END)
- chksum_update_needed = 1;
- }
-
- if (chksum_update_needed) {
- cmos_set_checksum(LB_CKS_RANGE_START, LB_CKS_RANGE_END,
- LB_CKS_LOC);
- }
- return CB_SUCCESS;
-}
-
-
-enum cb_err set_option(const char *name, void *value)
-{
- struct cmos_option_table *ct;
- struct cmos_entries *ce;
- unsigned long length;
- size_t namelen;
- int found = 0;
-
- if (!IS_ENABLED(CONFIG_USE_OPTION_TABLE))
- return CB_CMOS_OTABLE_DISABLED;
-
- /* Figure out how long name is */
- namelen = strnlen(name, CMOS_MAX_NAME_LENGTH);
-
- /* find the requested entry record */
- ct = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, "cmos_layout.bin",
- CBFS_COMPONENT_CMOS_LAYOUT, NULL);
- if (!ct) {
- printk(BIOS_ERR, "cmos_layout.bin could not be found. "
- "Options are disabled\n");
- return CB_CMOS_LAYOUT_NOT_FOUND;
- }
- ce = (struct cmos_entries*)((unsigned char *)ct + ct->header_length);
- for(; ce->tag == LB_TAG_OPTION;
- ce = (struct cmos_entries*)((unsigned char *)ce + ce->size)) {
- if (memcmp(ce->name, name, namelen) == 0) {
- found = 1;
- break;
- }
- }
- if (!found) {
- printk(BIOS_DEBUG, "WARNING: No CMOS option '%s'.\n", name);
- return CB_CMOS_OPTION_NOT_FOUND;
- }
-
- length = ce->length;
- if (ce->config == 's') {
- length = MAX(strlen((const char *)value) * 8, ce->length - 8);
- /* make sure the string is null terminated */
- if (set_cmos_value(ce->bit + ce->length - 8, 8, &(u8[]){0})
- != CB_SUCCESS)
- return (CB_CMOS_ACCESS_ERROR);
- }
-
- if (set_cmos_value(ce->bit, length, value) != CB_SUCCESS)
- return (CB_CMOS_ACCESS_ERROR);
-
- return CB_SUCCESS;
-}
-
-/*
- * If the CMOS is cleared, the rtc_reg has the invalid date. That
- * hurts some OSes. Even if we don't set USE_OPTION_TABLE, we need
- * to make sure the date is valid.
- */
-void cmos_check_update_date()
-{
- u8 year, century;
-
- /* Assume hardware always supports RTC_CLK_ALTCENTURY. */
- century = cmos_read(RTC_CLK_ALTCENTURY);
- year = cmos_read(RTC_CLK_YEAR);
-
- /*
- * TODO: If century is 0xFF, 100% that the cmos is cleared.
- * Other than that, so far rtc_year is the only entry to check
- * if the date is valid.
- */
- if (century > 0x99 || year > 0x99) /* Invalid date */
- cmos_reset_date();
-}
-
-int rtc_set(const struct rtc_time *time){
- cmos_write(bin2bcd(time->sec), RTC_CLK_SECOND);
- cmos_write(bin2bcd(time->min), RTC_CLK_MINUTE);
- cmos_write(bin2bcd(time->hour), RTC_CLK_HOUR);
- cmos_write(bin2bcd(time->mday), RTC_CLK_DAYOFMONTH);
- cmos_write(bin2bcd(time->mon), RTC_CLK_MONTH);
- cmos_write(bin2bcd(time->year % 100), RTC_CLK_YEAR);
- /* Same assumption as above: We always have RTC_CLK_ALTCENTURY */
- cmos_write(bin2bcd(time->year / 100), RTC_CLK_ALTCENTURY);
- cmos_write(bin2bcd(time->wday + 1), RTC_CLK_DAYOFWEEK);
- return 0;
-}
-
-int rtc_get(struct rtc_time *time)
-{
- time->sec = bcd2bin(cmos_read(RTC_CLK_SECOND));
- time->min = bcd2bin(cmos_read(RTC_CLK_MINUTE));
- time->hour = bcd2bin(cmos_read(RTC_CLK_HOUR));
- time->mday = bcd2bin(cmos_read(RTC_CLK_DAYOFMONTH));
- time->mon = bcd2bin(cmos_read(RTC_CLK_MONTH));
- time->year = bcd2bin(cmos_read(RTC_CLK_YEAR));
- /* Same assumption as above: We always have RTC_CLK_ALTCENTURY */
- time->year += bcd2bin(cmos_read(RTC_CLK_ALTCENTURY)) * 100;
- time->wday = bcd2bin(cmos_read(RTC_CLK_DAYOFWEEK)) - 1;
- return 0;
-}
diff --git a/src/drivers/pc80/mc146818rtc_early.c b/src/drivers/pc80/mc146818rtc_early.c
deleted file mode 100644
index 421af2f..0000000
--- a/src/drivers/pc80/mc146818rtc_early.c
+++ /dev/null
@@ -1,104 +0,0 @@
-#include <stdint.h>
-#include <pc80/mc146818rtc.h>
-#include <fallback.h>
-#if CONFIG_USE_OPTION_TABLE
-#include "option_table.h"
-#endif
-
-#ifndef CONFIG_MAX_REBOOT_CNT
-#error "CONFIG_MAX_REBOOT_CNT not defined"
-#endif
-#if CONFIG_MAX_REBOOT_CNT > 15
-#error "CONFIG_MAX_REBOOT_CNT too high"
-#endif
-
-static int cmos_error(void)
-{
- unsigned char reg_d;
- /* See if the cmos error condition has been flagged */
- reg_d = cmos_read(RTC_REG_D);
- return (reg_d & RTC_VRT) == 0;
-}
-
-static int cmos_chksum_valid(void)
-{
-#if CONFIG_USE_OPTION_TABLE
- unsigned char addr;
- u16 sum, old_sum;
- sum = 0;
- /* Compute the cmos checksum */
- for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) {
- sum += cmos_read(addr);
- }
-
- /* Read the stored checksum */
- old_sum = cmos_read(LB_CKS_LOC) << 8;
- old_sum |= cmos_read(LB_CKS_LOC+1);
-
- return sum == old_sum;
-#else
- return 0;
-#endif
-}
-
-
-static inline __attribute__((unused)) int last_boot_normal(void)
-{
- unsigned char byte;
- byte = cmos_read(RTC_BOOT_BYTE);
- return (byte & (1 << 1));
-}
-
-static inline __attribute__((unused)) int do_normal_boot(void)
-{
- unsigned char byte;
-
- if (cmos_error() || !cmos_chksum_valid()) {
- /* There are no impossible values, no checksums so just
- * trust whatever value we have in the the cmos,
- * but clear the fallback bit.
- */
- byte = cmos_read(RTC_BOOT_BYTE);
- byte &= 0x0c;
- byte |= CONFIG_MAX_REBOOT_CNT << 4;
- cmos_write(byte, RTC_BOOT_BYTE);
- }
-
- /* The RTC_BOOT_BYTE is now o.k. see where to go. */
- byte = cmos_read(RTC_BOOT_BYTE);
-
- if (!IS_ENABLED(CONFIG_SKIP_MAX_REBOOT_CNT_CLEAR))
- /* Are we in normal mode? */
- if (byte & 1)
- byte &= 0x0f; /* yes, clear the boot count */
-
- /* Properly set the last boot flag */
- byte &= 0xfc;
- if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) {
- byte |= (1<<1);
- }
-
- /* Are we already at the max count? */
- if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) {
- byte += 1 << 4; /* No, add 1 to the count */
- }
- else {
- byte &= 0xfc; /* Yes, put in fallback mode */
- }
-
- /* Save the boot byte */
- cmos_write(byte, RTC_BOOT_BYTE);
-
- return (byte & (1<<1));
-}
-
-unsigned read_option_lowlevel(unsigned start, unsigned size, unsigned def)
-{
-#if CONFIG_USE_OPTION_TABLE
- unsigned byte;
- byte = cmos_read(start/8);
- return (byte >> (start & 7U)) & ((1U << size) - 1U);
-#else
- return def;
-#endif
-}
diff --git a/src/drivers/pc80/pc/Kconfig b/src/drivers/pc80/pc/Kconfig
new file mode 100644
index 0000000..8d35c6d
--- /dev/null
+++ b/src/drivers/pc80/pc/Kconfig
@@ -0,0 +1,18 @@
+# Might be removed (alongside with the PS/2 init code) once payloads
+# reliably support PS/2 init themselves.
+
+config DRIVERS_PS2_KEYBOARD
+ bool "PS/2 keyboard init"
+ default y
+ depends on PC80_SYSTEM
+ help
+ Enable this option to initialize PS/2 keyboards found connected
+ to the PS/2 port.
+
+ Some payloads (eg, filo) require this option. Other payloads
+ (eg, GRUB 2, SeaBIOS, Linux) do not require it.
+ Initializing a PS/2 keyboard can take several hundred milliseconds.
+
+ If you know you will only use a payload which does not require
+ this option, then you can say N here to speed up boot time.
+ Otherwise say Y.
diff --git a/src/drivers/pc80/pc/Makefile.inc b/src/drivers/pc80/pc/Makefile.inc
new file mode 100644
index 0000000..550ca12
--- /dev/null
+++ b/src/drivers/pc80/pc/Makefile.inc
@@ -0,0 +1,11 @@
+ifeq ($(CONFIG_ARCH_X86),y)
+
+ramstage-y += isa-dma.c
+ramstage-y += i8254.c
+ramstage-y += i8259.c
+ramstage-$(CONFIG_UDELAY_IO) += udelay_io.c
+ramstage-y += keyboard.c
+ramstage-$(CONFIG_SPKMODEM) += spkmodem.c
+romstage-$(CONFIG_SPKMODEM) += spkmodem.c
+
+endif
diff --git a/src/drivers/pc80/pc/i8254.c b/src/drivers/pc80/pc/i8254.c
new file mode 100644
index 0000000..22ca809
--- /dev/null
+++ b/src/drivers/pc80/pc/i8254.c
@@ -0,0 +1,55 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <pc80/i8254.h>
+#include <console/console.h>
+
+/* Initialize i8254 timers */
+
+void setup_i8254(void)
+{
+ /* Timer 0 (taken from biosemu) */
+ outb(TIMER0_SEL|WORD_ACCESS|MODE3|BINARY_COUNT, TIMER_MODE_PORT);
+ outb(0x00, TIMER0_PORT);
+ outb(0x00, TIMER0_PORT);
+
+ /* Timer 1 */
+ outb(TIMER1_SEL|LOBYTE_ACCESS|MODE3|BINARY_COUNT, TIMER_MODE_PORT);
+ outb(0x12, TIMER1_PORT);
+}
+
+#if CONFIG_UDELAY_TIMER2
+static void load_timer2(unsigned int ticks)
+{
+ /* Set up the timer gate, turn off the speaker */
+ outb((inb(PPC_PORTB) & ~PPCB_SPKR) | PPCB_T2GATE, PPC_PORTB);
+ outb(TIMER2_SEL|WORD_ACCESS|MODE0|BINARY_COUNT, TIMER_MODE_PORT);
+ outb(ticks & 0xFF, TIMER2_PORT);
+ outb(ticks >> 8, TIMER2_PORT);
+}
+
+
+void udelay(int usecs)
+{
+ load_timer2((usecs*TICKS_PER_MS)/1000);
+ while ((inb(PPC_PORTB) & PPCB_T2OUT) == 0)
+ ;
+}
+#endif
diff --git a/src/drivers/pc80/pc/i8259.c b/src/drivers/pc80/pc/i8259.c
new file mode 100644
index 0000000..9c43473
--- /dev/null
+++ b/src/drivers/pc80/pc/i8259.c
@@ -0,0 +1,142 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <pc80/i8259.h>
+#include <console/console.h>
+
+/* Read the current PIC IRQ mask */
+u16 pic_read_irq_mask(void)
+{
+ u16 mask;
+ int i;
+
+ mask = inb(MASTER_PIC_OCW1) | (inb(SLAVE_PIC_OCW1) << 8);
+
+ printk(BIOS_DEBUG, "8259 PIC: OCW1 IRQ Mask: 0x%x\n", mask);
+ printk(BIOS_SPEW, "\tEnabled IRQs (0 = Unmasked, 1 = Masked off):\n"
+ "\t\tMaster\t\tSlave\n");
+ for(i = 0; i <= 7; i++) {
+ printk(BIOS_SPEW, "\t\tIRQ%X: %x\t\tIRQ%X: %x\n",
+ i, (mask >> i) & 1, i + 8, (mask >> (i + 8)) & 1);
+ }
+ return mask;
+}
+
+/*
+ * Write an IRQ mask to the PIC:
+ * IRQA is bit 0xA in the 16 bit bitmask (OCW1)
+ */
+void pic_write_irq_mask(u16 mask)
+{
+ outb(mask, MASTER_PIC_OCW1);
+ outb(mask >> 8, SLAVE_PIC_OCW1);
+}
+
+/*
+ * The PIC IRQs default to masked off
+ * Allow specific IRQs to be enabled (1)
+ * or disabled by (0) the user
+ */
+void pic_irq_enable(u8 int_num, u8 mask)
+{
+ pic_write_irq_mask(pic_read_irq_mask() & ~(mask << int_num));
+ pic_read_irq_mask();
+}
+
+void setup_i8259(void)
+{
+ /* A write to ICW1 starts the Interrupt Controller Initialization
+ * Sequence. This implicitly causes the following to happen:
+ * - Interrupt Mask register is cleared
+ * - Priority 7 is assigned to IRQ7 input
+ * - Slave mode address is set to 7
+ * - Special mask mode is cleared
+ *
+ * We send the initialization sequence to both the master and
+ * slave i8259 controller.
+ */
+ outb(ICW_SELECT|IC4, MASTER_PIC_ICW1);
+ outb(ICW_SELECT|IC4, SLAVE_PIC_ICW1);
+
+ /* Now the interrupt controller expects us to write to ICW2. */
+ outb(INT_VECTOR_MASTER | IRQ0, MASTER_PIC_ICW2);
+ outb(INT_VECTOR_SLAVE | IRQ8, SLAVE_PIC_ICW2);
+
+ /* Now the interrupt controller expects us to write to ICW3.
+ *
+ * The normal scenario is to set up cascading on IRQ2 on the master
+ * i8259 and assign the slave ID 2 to the slave i8259.
+ */
+ outb(CASCADED_PIC, MASTER_PIC_ICW3);
+ outb(SLAVE_ID, SLAVE_PIC_ICW3);
+
+ /* Now the interrupt controller expects us to write to ICW4.
+ *
+ * We switch both i8259 to microprocessor mode because they're
+ * operating as part of an x86 architecture based chipset
+ */
+ outb(MICROPROCESSOR_MODE, MASTER_PIC_ICW2);
+ outb(MICROPROCESSOR_MODE, SLAVE_PIC_ICW2);
+
+ /* Now clear the interrupts through OCW1.
+ * First we mask off all interrupts on the slave interrupt controller
+ * then we mask off all interrupts but interrupt 2 on the master
+ * controller. This way the cascading stays alive.
+ */
+ outb(ALL_IRQS, SLAVE_PIC_OCW1);
+ outb(ALL_IRQS & ~IRQ2, MASTER_PIC_OCW1);
+}
+
+/**
+ * @brief Configure IRQ triggering in the i8259 compatible Interrupt Controller.
+ *
+ * Switch a certain interrupt to be level / edge triggered.
+ *
+ * @param int_num legacy interrupt number (3-7, 9-15)
+ * @param is_level_triggered 1 for level triggered interrupt, 0 for edge
+ * triggered interrupt
+ */
+void i8259_configure_irq_trigger(int int_num, int is_level_triggered)
+{
+ u16 int_bits = inb(ELCR1) | (((u16)inb(ELCR2)) << 8);
+
+ if (is_level_triggered)
+ int_bits |= (1 << int_num);
+ else
+ int_bits &= ~(1 << int_num);
+
+ /* Write new values */
+ outb((u8)(int_bits & 0xff), ELCR1);
+ outb((u8)(int_bits >> 8), ELCR2);
+
+#ifdef PARANOID_IRQ_TRIGGERS
+ /* Try reading back the new values. This seems like an error but is not ... */
+ if (inb(ELCR1) != (int_bits & 0xff)) {
+ printk(BIOS_ERR, "%s: lower order bits are wrong: want 0x%x, got 0x%x\n",
+ __func__, (int_bits & 0xff), inb(ELCR1));
+ }
+
+ if (inb(ELCR2) != (int_bits >> 8)) {
+ printk(BIOS_ERR, "%s: higher order bits are wrong: want 0x%x, got 0x%x\n",
+ __func__, (int_bits>>8), inb(ELCR2));
+ }
+#endif
+}
diff --git a/src/drivers/pc80/pc/isa-dma.c b/src/drivers/pc80/pc/isa-dma.c
new file mode 100644
index 0000000..b64f125
--- /dev/null
+++ b/src/drivers/pc80/pc/isa-dma.c
@@ -0,0 +1,44 @@
+#include <arch/io.h>
+#include <pc80/isa-dma.h>
+
+/* DMA controller registers */
+#define DMA1_CMD_REG 0x08 /* command register (w) */
+#define DMA1_STAT_REG 0x08 /* status register (r) */
+#define DMA1_REQ_REG 0x09 /* request register (w) */
+#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
+#define DMA1_MODE_REG 0x0B /* mode register (w) */
+#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
+#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
+#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
+#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
+
+#define DMA2_CMD_REG 0xD0 /* command register (w) */
+#define DMA2_STAT_REG 0xD0 /* status register (r) */
+#define DMA2_REQ_REG 0xD2 /* request register (w) */
+#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
+#define DMA2_MODE_REG 0xD6 /* mode register (w) */
+#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
+#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
+#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
+#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
+
+#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT 0x10
+
+
+void isa_dma_init(void)
+{
+ /* slave at 0x00 - 0x0f */
+ /* master at 0xc0 - 0xdf */
+ /* 0x80 - 0x8f DMA page registers */
+ /* DMA: 0x00, 0x02, 0x4, 0x06 base address for DMA channel */
+ outb(0, DMA1_RESET_REG);
+ outb(0, DMA2_RESET_REG);
+ outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
+ outb(0, DMA2_MASK_REG);
+}
diff --git a/src/drivers/pc80/pc/keyboard.c b/src/drivers/pc80/pc/keyboard.c
new file mode 100644
index 0000000..06eae46
--- /dev/null
+++ b/src/drivers/pc80/pc/keyboard.c
@@ -0,0 +1,330 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2003 Ollie Lo <ollielo at hotmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <pc80/keyboard.h>
+#include <device/device.h>
+#include <arch/io.h>
+#include <delay.h>
+#include <types.h>
+#include <arch/acpi.h>
+
+#define KBD_DATA 0x60
+#define KBD_COMMAND 0x64
+#define KBD_STATUS 0x64
+#define KBD_IBF (1 << 1) // 1: input buffer full (data ready for ec)
+#define KBD_OBF (1 << 0) // 1: output buffer full (data ready for host)
+
+// Keyboard Controller Commands
+#define KBC_CMD_READ_COMMAND 0x20 // Read command byte
+#define KBC_CMD_WRITE_COMMAND 0x60 // Write command byte
+#define KBC_CMD_SELF_TEST 0xAA // Controller self-test
+#define KBC_CMD_KBD_TEST 0xAB // Keyboard Interface test
+
+/* The Keyboard controller command byte
+ * BIT | Description
+ * ----+-------------------------------------------------------
+ * 7 | reserved, must be zero
+ * 6 | XT Translation, (1 = on, 0 = off)
+ * 5 | Disable Mouse Port (1 = disable, 0 = enable)
+ * 4 | Disable Keyboard Port (1 = disable, 0 = enable)
+ * 3 | reserved, must be zero
+ * 2 | System Flag (1 = self-test passed. DO NOT SET TO ZERO)
+ * 1 | Mouse Port Interrupts (1 = enable, 0 = disable)
+ * 0 | Keyboard Port Interrupts (1 = enable, 0 = disable)
+ */
+
+// Keyboard Controller Replies
+#define KBC_REPLY_SELFTEST_OK 0x55 // controller self-test succeeded
+
+//
+// Keyboard Replies
+//
+#define KBD_REPLY_POR 0xAA // Power on reset
+#define KBD_REPLY_ACK 0xFA // Command ACK
+#define KBD_REPLY_RESEND 0xFE // Command NACK, send command again
+
+/* Wait 400ms for keyboard controller answers */
+#define KBC_TIMEOUT_IN_MS 400
+
+static int kbc_input_buffer_empty(void)
+{
+ u32 timeout;
+ for (timeout = KBC_TIMEOUT_IN_MS;
+ timeout && (inb(KBD_STATUS) & KBD_IBF); timeout--)
+ mdelay(1);
+
+ if (!timeout)
+ printk(BIOS_WARNING,
+ "Unexpected Keyboard controller input buffer full\n");
+ return !!timeout;
+}
+
+static int kbc_output_buffer_full(void)
+{
+ u32 timeout;
+ for (timeout = KBC_TIMEOUT_IN_MS;
+ timeout && ((inb(KBD_STATUS) & KBD_OBF) == 0); timeout--)
+ mdelay(1);
+
+ if (!timeout)
+ printk(BIOS_INFO,
+ "Keyboard controller output buffer result timeout\n");
+ return !!timeout;
+}
+
+static int kbc_cleanup_buffers(void)
+{
+ u32 timeout;
+ for (timeout = KBC_TIMEOUT_IN_MS;
+ timeout && (inb(KBD_STATUS) & (KBD_OBF | KBD_IBF)); timeout--) {
+ mdelay(1);
+ inb(KBD_DATA);
+ }
+
+ if (!timeout) {
+ printk(BIOS_ERR,
+ "Couldn't cleanup the keyboard controller buffers\n");
+ printk(BIOS_ERR, "Status (0x%x): 0x%x, Buffer (0x%x): 0x%x\n",
+ KBD_STATUS, inb(KBD_STATUS), KBD_DATA, inb(KBD_DATA));
+ }
+
+ return !!timeout;
+}
+
+static enum cb_err kbc_self_test(void)
+{
+ u8 self_test;
+
+ /* Clean up any junk that might have been in the KBC.
+ * Both input and output buffers must be empty.
+ */
+ if (!kbc_cleanup_buffers())
+ return CB_KBD_CONTROLLER_FAILURE;
+
+ /* reset/self test 8042 - send cmd 0xAA */
+ outb(KBC_CMD_SELF_TEST, KBD_COMMAND);
+
+ if (!kbc_output_buffer_full()) {
+ /* There probably is no keyboard controller. */
+ printk(BIOS_ERR, "Could not reset keyboard controller.\n");
+ return CB_KBD_CONTROLLER_FAILURE;
+ }
+
+ /* read self-test result, 0x55 is returned in the output buffer */
+ self_test = inb(KBD_DATA);
+
+ if (self_test != 0x55) {
+ printk(BIOS_ERR, "Keyboard Controller self-test failed: 0x%x\n",
+ self_test);
+ return CB_KBD_CONTROLLER_FAILURE;
+ }
+
+ /* ensure the buffers are empty */
+ kbc_cleanup_buffers();
+
+ /* keyboard interface test */
+ outb(KBC_CMD_KBD_TEST, KBD_COMMAND);
+
+ if (!kbc_output_buffer_full()) {
+ printk(BIOS_ERR, "Keyboard Interface test timed out.\n");
+ return CB_KBD_CONTROLLER_FAILURE;
+ }
+
+ /* read test result, 0x00 should be returned in case of no failures */
+ self_test = inb(KBD_DATA);
+
+ if (self_test != 0x00) {
+ printk(BIOS_ERR, "Keyboard Interface test failed: 0x%x\n",
+ self_test);
+ return CB_KBD_INTERFACE_FAILURE;
+ }
+
+ return CB_SUCCESS;
+}
+
+static u8 send_keyboard(u8 command)
+{
+ u8 regval = 0;
+ u8 resend = 10;
+
+ do {
+ if (!kbc_input_buffer_empty())
+ return 0;
+ outb(command, KBD_DATA);
+ /* the reset command takes much longer then normal commands and
+ * even worse, some keyboards do send the ACK _after_ doing the
+ * reset */
+ if (command == 0xFF) {
+ u8 retries;
+ for (retries = 9; retries && !kbc_output_buffer_full();
+ retries--) ;
+ }
+ if (!kbc_output_buffer_full()) {
+ printk(BIOS_ERR,
+ "Could not send keyboard command %02x\n",
+ command);
+ return 0;
+ }
+ regval = inb(KBD_DATA);
+ --resend;
+ } while (regval == KBD_REPLY_RESEND && resend > 0);
+
+ return regval;
+}
+
+void pc_keyboard_init(void)
+{
+ u8 retries;
+ u8 regval;
+ enum cb_err err;
+
+ if (!CONFIG_DRIVERS_PS2_KEYBOARD)
+ return;
+
+ if (acpi_is_wakeup_s3())
+ return;
+
+ printk(BIOS_DEBUG, "Keyboard init...\n");
+
+ /* Run a keyboard controller self-test */
+ err = kbc_self_test();
+ /* Ignore iterface failure as it's non-fatal. */
+ if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE)
+ return;
+
+ /* Enable keyboard interface - No IRQ */
+ if (!kbc_input_buffer_empty())
+ return;
+ outb(0x60, KBD_COMMAND);
+ if (!kbc_input_buffer_empty())
+ return;
+ outb(0x20, KBD_DATA); /* send cmd: enable keyboard */
+ if (!kbc_input_buffer_empty()) {
+ printk(BIOS_INFO, "Timeout while enabling keyboard\n");
+ return;
+ }
+
+ /* clean up any junk that might have been in the keyboard */
+ if (!kbc_cleanup_buffers())
+ return;
+
+ /* reset keyboard and self test (keyboard side) */
+ regval = send_keyboard(0xFF);
+ if (regval == KBD_REPLY_RESEND) {
+ /* keeps sending RESENDs, probably no keyboard. */
+ printk(BIOS_INFO, "No PS/2 keyboard detected.\n");
+ return;
+ }
+
+ if (regval != KBD_REPLY_ACK) {
+ printk(BIOS_ERR, "Keyboard reset failed ACK: 0x%x\n", regval);
+ return;
+ }
+
+ /* the reset command takes some time, so wait a little longer */
+ for (retries = 9; retries && !kbc_output_buffer_full(); retries--) ;
+
+ if (!kbc_output_buffer_full()) {
+ printk(BIOS_ERR, "Timeout waiting for keyboard after reset.\n");
+ return;
+ }
+
+ regval = inb(KBD_DATA);
+ if (regval != 0xAA) {
+ printk(BIOS_ERR, "Keyboard reset selftest failed: 0x%x\n",
+ regval);
+ return;
+ }
+
+ /*
+ * The following set scancode stuff is what normal BIOS do. It could be
+ * argued that coreboot shouldn't set the scan code.....
+ */
+
+ /* disable the keyboard */
+ regval = send_keyboard(0xF5);
+ if (regval != KBD_REPLY_ACK) {
+ printk(BIOS_ERR, "Keyboard disable failed ACK: 0x%x\n", regval);
+ return;
+ }
+
+ /* Set scancode command */
+ regval = send_keyboard(0xF0);
+ if (regval != KBD_REPLY_ACK) {
+ printk(BIOS_ERR, "Keyboard set scancode cmd failed ACK: 0x%x\n",
+ regval);
+ return;
+ }
+ /* Set scancode mode 2 */
+ regval = send_keyboard(0x02);
+ if (regval != KBD_REPLY_ACK) {
+ printk(BIOS_ERR,
+ "Keyboard set scancode mode failed ACK: 0x%x\n", regval);
+ return;
+ }
+
+ /* All is well - enable keyboard interface */
+ if (!kbc_input_buffer_empty())
+ return;
+ outb(0x60, KBD_COMMAND);
+ if (!kbc_input_buffer_empty())
+ return;
+ outb(0x65, KBD_DATA); /* send cmd: enable keyboard and IRQ 1 */
+ if (!kbc_input_buffer_empty()) {
+ printk(BIOS_ERR, "Timeout during keyboard enable\n");
+ return;
+ }
+
+ /* enable the keyboard */
+ regval = send_keyboard(0xF4);
+ if (regval != KBD_REPLY_ACK) {
+ printk(BIOS_ERR, "Keyboard enable failed ACK: 0x%x\n", regval);
+ return;
+ }
+}
+
+/*
+ * Support PS/2 mode - oddball SIOs(KBC) need this setup
+ * Not well documented. Google - 0xcb keyboard controller
+ * This is called before pc_keyboard_init().
+ */
+void set_kbc_ps2_mode(void)
+{
+ enum cb_err err;
+
+ /* Run a keyboard controller self-test */
+ err = kbc_self_test();
+ /* Ignore iterface failure as it's non-fatal. */
+ if (err != CB_SUCCESS && err != CB_KBD_INTERFACE_FAILURE)
+ return;
+
+ /* Support PS/2 mode */
+ if (!kbc_input_buffer_empty())
+ return;
+ outb(0xcb, KBD_COMMAND);
+
+ if (!kbc_input_buffer_empty())
+ return;
+ outb(0x01, KBD_DATA);
+
+ kbc_cleanup_buffers();
+}
diff --git a/src/drivers/pc80/pc/ps2_controller.asl b/src/drivers/pc80/pc/ps2_controller.asl
new file mode 100644
index 0000000..9b201b0
--- /dev/null
+++ b/src/drivers/pc80/pc/ps2_controller.asl
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2013 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+ Device (PS2K) // Keyboard
+ {
+ Name(_HID, EISAID("PNP0303"))
+ Name(_CID, EISAID("PNP030B"))
+
+ Name(_CRS, ResourceTemplate()
+ {
+ IO (Decode16, 0x60, 0x60, 0x01, 0x01)
+ IO (Decode16, 0x64, 0x64, 0x01, 0x01)
+ IRQ (Edge, ActiveHigh, Exclusive) { 0x01 } // IRQ 1
+ })
+
+ Method (_STA, 0)
+ {
+ Return (0xf)
+ }
+ }
+
+ Device (PS2M) // Mouse
+ {
+ Name(_HID, EISAID("PNP0F13"))
+ Name(_CRS, ResourceTemplate()
+ {
+ IRQ (Edge, ActiveHigh, Exclusive) { 0x0c } // IRQ 12
+ })
+
+ Method(_STA, 0)
+ {
+ Return (0xf)
+ }
+ }
diff --git a/src/drivers/pc80/pc/spkmodem.c b/src/drivers/pc80/pc/spkmodem.c
new file mode 100644
index 0000000..89773b1
--- /dev/null
+++ b/src/drivers/pc80/pc/spkmodem.c
@@ -0,0 +1,128 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/io.h>
+#include <console/spkmodem.h>
+#include <cpu/x86/tsc.h>
+
+#define SPEAKER_PIT_FREQUENCY 0x1234dd
+
+
+enum {
+ PIT_COUNTER_0 = 0x40,
+ PIT_COUNTER_1 = 0x41,
+ PIT_COUNTER_2 = 0x42,
+ PIT_CTRL = 0x43,
+ PIT_SPEAKER_PORT = 0x61,
+};
+
+
+enum {
+ PIT_SPK_TMR2 = 0x01,
+ PIT_SPK_DATA = 0x02,
+ PIT_SPK_TMR2_LATCH = 0x20
+};
+
+enum {
+ PIT_CTRL_SELECT_MASK = 0xc0,
+ PIT_CTRL_SELECT_0 = 0x00,
+ PIT_CTRL_SELECT_1 = 0x40,
+ PIT_CTRL_SELECT_2 = 0x80,
+
+ PIT_CTRL_READLOAD_MASK= 0x30,
+ PIT_CTRL_COUNTER_LATCH = 0x00,
+ PIT_CTRL_READLOAD_LSB = 0x10,
+ PIT_CTRL_READLOAD_MSB = 0x20,
+ PIT_CTRL_READLOAD_WORD = 0x30,
+
+ PIT_CTRL_MODE_MASK = 0x0e,
+ PIT_CTRL_INTR_ON_TERM = 0x00,
+ PIT_CTRL_PROGR_ONE_SHOT = 0x02,
+
+ PIT_CTRL_RATE_GEN = 0x04,
+
+ PIT_CTRL_SQUAREWAVE_GEN = 0x06,
+ PIT_CTRL_SOFTSTROBE = 0x08,
+
+ PIT_CTRL_HARDSTROBE = 0x0a,
+
+
+ PIT_CTRL_COUNT_MASK = 0x01,
+ PIT_CTRL_COUNT_BINARY = 0x00,
+ PIT_CTRL_COUNT_BCD = 0x01
+};
+
+
+static void
+make_tone (uint16_t freq_count, unsigned int duration)
+{
+ outb (PIT_CTRL_SELECT_2
+ | PIT_CTRL_READLOAD_WORD
+ | PIT_CTRL_SQUAREWAVE_GEN
+ | PIT_CTRL_COUNT_BINARY, PIT_CTRL);
+
+ outb (freq_count & 0xff, PIT_COUNTER_2);
+
+ outb ((freq_count >> 8) & 0xff, PIT_COUNTER_2);
+
+ outb (inb (PIT_SPEAKER_PORT)
+ | PIT_SPK_TMR2 | PIT_SPK_DATA,
+ PIT_SPEAKER_PORT);
+
+ for (; duration; duration--) {
+ unsigned short counter, previous_counter = 0xffff;
+ while (1) {
+ counter = inb (PIT_COUNTER_2);
+ counter |= ((uint16_t) inb (PIT_COUNTER_2)) << 8;
+ if (counter > previous_counter)
+ {
+ previous_counter = counter;
+ break;
+ }
+ previous_counter = counter;
+ }
+ }
+}
+
+void spkmodem_tx_byte(unsigned char c)
+{
+ int i;
+
+ make_tone (SPEAKER_PIT_FREQUENCY / 200, 4);
+ for (i = 7; i >= 0; i--) {
+ if ((c >> i) & 1)
+ make_tone (SPEAKER_PIT_FREQUENCY / 2000, 20);
+ else
+ make_tone (SPEAKER_PIT_FREQUENCY / 4000, 40);
+ make_tone (SPEAKER_PIT_FREQUENCY / 1000, 10);
+ }
+ make_tone (SPEAKER_PIT_FREQUENCY / 200, 0);
+}
+
+void spkmodem_init(void)
+{
+ /* Some cards need time to come online. Output some message to get it started. */
+ spkmodem_tx_byte('S');
+ spkmodem_tx_byte('P');
+ spkmodem_tx_byte('K');
+ spkmodem_tx_byte('\r');
+ spkmodem_tx_byte('\n');
+}
diff --git a/src/drivers/pc80/pc/udelay_io.c b/src/drivers/pc80/pc/udelay_io.c
new file mode 100644
index 0000000..1cdc673
--- /dev/null
+++ b/src/drivers/pc80/pc/udelay_io.c
@@ -0,0 +1,13 @@
+#include <arch/io.h>
+#include <delay.h>
+
+void init_timer(void)
+{
+}
+
+void udelay(unsigned usecs)
+{
+ int i;
+ for(i = 0; i < usecs; i++)
+ inb(0x80);
+}
diff --git a/src/drivers/pc80/ps2_controller.asl b/src/drivers/pc80/ps2_controller.asl
deleted file mode 100644
index 9b201b0..0000000
--- a/src/drivers/pc80/ps2_controller.asl
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (c) 2013 Vladimir Serbinenko
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
- Device (PS2K) // Keyboard
- {
- Name(_HID, EISAID("PNP0303"))
- Name(_CID, EISAID("PNP030B"))
-
- Name(_CRS, ResourceTemplate()
- {
- IO (Decode16, 0x60, 0x60, 0x01, 0x01)
- IO (Decode16, 0x64, 0x64, 0x01, 0x01)
- IRQ (Edge, ActiveHigh, Exclusive) { 0x01 } // IRQ 1
- })
-
- Method (_STA, 0)
- {
- Return (0xf)
- }
- }
-
- Device (PS2M) // Mouse
- {
- Name(_HID, EISAID("PNP0F13"))
- Name(_CRS, ResourceTemplate()
- {
- IRQ (Edge, ActiveHigh, Exclusive) { 0x0c } // IRQ 12
- })
-
- Method(_STA, 0)
- {
- Return (0xf)
- }
- }
diff --git a/src/drivers/pc80/rtc/Kconfig b/src/drivers/pc80/rtc/Kconfig
new file mode 100644
index 0000000..350863e
--- /dev/null
+++ b/src/drivers/pc80/rtc/Kconfig
@@ -0,0 +1,4 @@
+config DRIVERS_MC146818
+ bool
+ default y if ARCH_X86
+ depends on PC80_SYSTEM
diff --git a/src/drivers/pc80/rtc/Makefile.inc b/src/drivers/pc80/rtc/Makefile.inc
new file mode 100644
index 0000000..4dee348
--- /dev/null
+++ b/src/drivers/pc80/rtc/Makefile.inc
@@ -0,0 +1,12 @@
+ifeq ($(CONFIG_ARCH_X86),y)
+
+romstage-$(CONFIG_DRIVERS_MC146818) += mc146818rtc_early.c
+romstage-$(CONFIG_DRIVERS_MC146818) += mc146818rtc.c
+ramstage-$(CONFIG_DRIVERS_MC146818) += mc146818rtc.c
+cbfs-files-$(CONFIG_HAVE_CMOS_DEFAULT) += cmos.default
+cmos.default-file = $(CONFIG_CMOS_DEFAULT_FILE):nvramtool
+cmos.default-type = 0xaa
+
+smm-$(CONFIG_DRIVERS_MC146818) += mc146818rtc.c
+
+endif
diff --git a/src/drivers/pc80/rtc/mc146818rtc.c b/src/drivers/pc80/rtc/mc146818rtc.c
new file mode 100644
index 0000000..4f034a2
--- /dev/null
+++ b/src/drivers/pc80/rtc/mc146818rtc.c
@@ -0,0 +1,380 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2014 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/acpi.h>
+#include <bcd.h>
+#include <stdint.h>
+#include <version.h>
+#include <console/console.h>
+#include <pc80/mc146818rtc.h>
+#include <boot/coreboot_tables.h>
+#include <rtc.h>
+#include <string.h>
+#include <cbfs.h>
+
+/* There's no way around this include guard. option_table.h is autogenerated */
+#if CONFIG_USE_OPTION_TABLE
+#include "option_table.h"
+#else
+#define LB_CKS_RANGE_START 0
+#define LB_CKS_RANGE_END 0
+#define LB_CKS_LOC 0
+#endif
+
+
+static void cmos_reset_date(void)
+{
+ /* Now setup a default date equals to the build date */
+ struct rtc_time time = {
+ .sec = 0,
+ .min = 0,
+ .hour = 1,
+ .mday = bcd2bin(coreboot_build_date.day),
+ .mon = bcd2bin(coreboot_build_date.month),
+ .year = (bcd2bin(coreboot_build_date.century) * 100) +
+ bcd2bin(coreboot_build_date.year),
+ .wday = bcd2bin(coreboot_build_date.weekday)
+ };
+ rtc_set(&time);
+}
+
+static int cmos_checksum_valid(int range_start, int range_end, int cks_loc)
+{
+ if (IS_ENABLED(CONFIG_STATIC_OPTION_TABLE))
+ return 1;
+
+ int i;
+ u16 sum, old_sum;
+ sum = 0;
+ for (i = range_start; i <= range_end; i++)
+ sum += cmos_read(i);
+ old_sum = ((cmos_read(cks_loc) << 8) | cmos_read(cks_loc + 1)) &
+ 0x0ffff;
+ return sum == old_sum;
+}
+
+static void cmos_set_checksum(int range_start, int range_end, int cks_loc)
+{
+ int i;
+ u16 sum;
+ sum = 0;
+ for (i = range_start; i <= range_end; i++)
+ sum += cmos_read(i);
+ cmos_write(((sum >> 8) & 0x0ff), cks_loc);
+ cmos_write(((sum >> 0) & 0x0ff), cks_loc + 1);
+}
+
+#define RTC_CONTROL_DEFAULT (RTC_24H)
+#define RTC_FREQ_SELECT_DEFAULT (RTC_REF_CLCK_32KHZ | RTC_RATE_1024HZ)
+
+#ifndef __SMM__
+void cmos_init(bool invalid)
+{
+ bool cmos_invalid = invalid;
+ bool checksum_invalid = false;
+ bool clear_cmos;
+ size_t i;
+ uint8_t x;
+
+#ifndef __PRE_RAM__
+ /*
+ * Avoid clearing pending interrupts and resetting the RTC control
+ * register in the resume path because the Linux kernel relies on
+ * this to know if it should restart the RTC timer queue if the wake
+ * was due to the RTC alarm.
+ */
+ if (acpi_is_wakeup_s3())
+ return;
+#endif /* __PRE_RAM__ */
+
+ printk(BIOS_DEBUG, "RTC Init\n");
+
+ if (IS_ENABLED(CONFIG_USE_OPTION_TABLE)) {
+ /* See if there has been a CMOS power problem. */
+ x = cmos_read(RTC_VALID);
+ cmos_invalid = !(x & RTC_VRT);
+
+ /* See if there is a CMOS checksum error */
+ checksum_invalid = !cmos_checksum_valid(PC_CKS_RANGE_START,
+ PC_CKS_RANGE_END, PC_CKS_LOC);
+
+ clear_cmos = false;
+ } else {
+ clear_cmos = true;
+ }
+
+ if (invalid || cmos_invalid || checksum_invalid) {
+ if (clear_cmos) {
+ cmos_write(0, 0x01);
+ cmos_write(0, 0x03);
+ cmos_write(0, 0x05);
+ for (i = 10; i < 128; i++)
+ cmos_write(0, i);
+ }
+
+ if (cmos_invalid)
+ cmos_reset_date();
+
+ printk(BIOS_WARNING, "RTC:%s%s%s%s\n",
+ invalid ? " Clear requested":"",
+ cmos_invalid ? " Power Problem":"",
+ checksum_invalid ? " Checksum invalid":"",
+ clear_cmos ? " zeroing cmos":"");
+ }
+
+ /* Setup the real time clock */
+ cmos_write(RTC_CONTROL_DEFAULT, RTC_CONTROL);
+ /* Setup the frequency it operates at */
+ cmos_write(RTC_FREQ_SELECT_DEFAULT, RTC_FREQ_SELECT);
+ /* Ensure all reserved bits are 0 in register D */
+ cmos_write(RTC_VRT, RTC_VALID);
+
+ if (IS_ENABLED(CONFIG_USE_OPTION_TABLE)) {
+ /* See if there is a LB CMOS checksum error */
+ checksum_invalid = !cmos_checksum_valid(LB_CKS_RANGE_START,
+ LB_CKS_RANGE_END,LB_CKS_LOC);
+ if (checksum_invalid)
+ printk(BIOS_DEBUG, "RTC: coreboot checksum invalid\n");
+
+ /* Make certain we have a valid checksum */
+ cmos_set_checksum(PC_CKS_RANGE_START, PC_CKS_RANGE_END, PC_CKS_LOC);
+ }
+
+ /* Clear any pending interrupts */
+ cmos_read(RTC_INTR_FLAGS);
+}
+#endif /* __SMM__ */
+
+
+/*
+ * This routine returns the value of the requested bits.
+ * input bit = bit count from the beginning of the cmos image
+ * length = number of bits to include in the value
+ * ret = a character pointer to where the value is to be returned
+ * returns CB_SUCCESS = successful, cb_err code if an error occurred
+ */
+static enum cb_err get_cmos_value(unsigned long bit, unsigned long length,
+ void *vret)
+{
+ unsigned char *ret;
+ unsigned long byte,byte_bit;
+ unsigned long i;
+ unsigned char uchar;
+
+ /*
+ * The table is checked when it is built to ensure all
+ * values are valid.
+ */
+ ret = vret;
+ byte = bit / 8; /* find the byte where the data starts */
+ byte_bit = bit % 8; /* find the bit in the byte where the data starts */
+ if (length < 9) { /* one byte or less */
+ uchar = cmos_read(byte); /* load the byte */
+ uchar >>= byte_bit; /* shift the bits to byte align */
+ /* clear unspecified bits */
+ ret[0] = uchar & ((1 << length) - 1);
+ } else { /* more that one byte so transfer the whole bytes */
+ for (i = 0; length; i++, length -= 8, byte++) {
+ /* load the byte */
+ ret[i] = cmos_read(byte);
+ }
+ }
+ return CB_SUCCESS;
+}
+
+enum cb_err get_option(void *dest, const char *name)
+{
+ struct cmos_option_table *ct;
+ struct cmos_entries *ce;
+ size_t namelen;
+ int found = 0;
+
+ if (!IS_ENABLED(CONFIG_USE_OPTION_TABLE))
+ return CB_CMOS_OTABLE_DISABLED;
+
+ /* Figure out how long name is */
+ namelen = strnlen(name, CMOS_MAX_NAME_LENGTH);
+
+ /* find the requested entry record */
+ ct = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, "cmos_layout.bin",
+ CBFS_COMPONENT_CMOS_LAYOUT, NULL);
+ if (!ct) {
+ printk(BIOS_ERR, "RTC: cmos_layout.bin could not be found. "
+ "Options are disabled\n");
+ return CB_CMOS_LAYOUT_NOT_FOUND;
+ }
+ ce = (struct cmos_entries*)((unsigned char *)ct + ct->header_length);
+ for(; ce->tag == LB_TAG_OPTION;
+ ce = (struct cmos_entries*)((unsigned char *)ce + ce->size)) {
+ if (memcmp(ce->name, name, namelen) == 0) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ printk(BIOS_DEBUG, "WARNING: No CMOS option '%s'.\n", name);
+ return CB_CMOS_OPTION_NOT_FOUND;
+ }
+
+ if (get_cmos_value(ce->bit, ce->length, dest) != CB_SUCCESS)
+ return CB_CMOS_ACCESS_ERROR;
+ if (!cmos_checksum_valid(LB_CKS_RANGE_START, LB_CKS_RANGE_END, LB_CKS_LOC))
+ return CB_CMOS_CHECKSUM_INVALID;
+ return CB_SUCCESS;
+}
+
+static enum cb_err set_cmos_value(unsigned long bit, unsigned long length,
+ void *vret)
+{
+ unsigned char *ret;
+ unsigned long byte,byte_bit;
+ unsigned long i;
+ unsigned char uchar, mask;
+ unsigned int chksum_update_needed = 0;
+
+ ret = vret;
+ byte = bit / 8; /* find the byte where the data starts */
+ byte_bit = bit % 8; /* find the bit where the data starts */
+ if (length <= 8) { /* one byte or less */
+ mask = (1 << length) - 1;
+ mask <<= byte_bit;
+
+ uchar = cmos_read(byte);
+ uchar &= ~mask;
+ uchar |= (ret[0] << byte_bit);
+ cmos_write(uchar, byte);
+ if (byte >= LB_CKS_RANGE_START && byte <= LB_CKS_RANGE_END)
+ chksum_update_needed = 1;
+ } else { /* more that one byte so transfer the whole bytes */
+ if (byte_bit || length % 8)
+ return CB_ERR_ARG;
+
+ for (i = 0; length; i++, length -= 8, byte++)
+ cmos_write(ret[i], byte);
+ if (byte >= LB_CKS_RANGE_START &&
+ byte <= LB_CKS_RANGE_END)
+ chksum_update_needed = 1;
+ }
+
+ if (chksum_update_needed) {
+ cmos_set_checksum(LB_CKS_RANGE_START, LB_CKS_RANGE_END,
+ LB_CKS_LOC);
+ }
+ return CB_SUCCESS;
+}
+
+
+enum cb_err set_option(const char *name, void *value)
+{
+ struct cmos_option_table *ct;
+ struct cmos_entries *ce;
+ unsigned long length;
+ size_t namelen;
+ int found = 0;
+
+ if (!IS_ENABLED(CONFIG_USE_OPTION_TABLE))
+ return CB_CMOS_OTABLE_DISABLED;
+
+ /* Figure out how long name is */
+ namelen = strnlen(name, CMOS_MAX_NAME_LENGTH);
+
+ /* find the requested entry record */
+ ct = cbfs_get_file_content(CBFS_DEFAULT_MEDIA, "cmos_layout.bin",
+ CBFS_COMPONENT_CMOS_LAYOUT, NULL);
+ if (!ct) {
+ printk(BIOS_ERR, "cmos_layout.bin could not be found. "
+ "Options are disabled\n");
+ return CB_CMOS_LAYOUT_NOT_FOUND;
+ }
+ ce = (struct cmos_entries*)((unsigned char *)ct + ct->header_length);
+ for(; ce->tag == LB_TAG_OPTION;
+ ce = (struct cmos_entries*)((unsigned char *)ce + ce->size)) {
+ if (memcmp(ce->name, name, namelen) == 0) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ printk(BIOS_DEBUG, "WARNING: No CMOS option '%s'.\n", name);
+ return CB_CMOS_OPTION_NOT_FOUND;
+ }
+
+ length = ce->length;
+ if (ce->config == 's') {
+ length = MAX(strlen((const char *)value) * 8, ce->length - 8);
+ /* make sure the string is null terminated */
+ if (set_cmos_value(ce->bit + ce->length - 8, 8, &(u8[]){0})
+ != CB_SUCCESS)
+ return (CB_CMOS_ACCESS_ERROR);
+ }
+
+ if (set_cmos_value(ce->bit, length, value) != CB_SUCCESS)
+ return (CB_CMOS_ACCESS_ERROR);
+
+ return CB_SUCCESS;
+}
+
+/*
+ * If the CMOS is cleared, the rtc_reg has the invalid date. That
+ * hurts some OSes. Even if we don't set USE_OPTION_TABLE, we need
+ * to make sure the date is valid.
+ */
+void cmos_check_update_date()
+{
+ u8 year, century;
+
+ /* Assume hardware always supports RTC_CLK_ALTCENTURY. */
+ century = cmos_read(RTC_CLK_ALTCENTURY);
+ year = cmos_read(RTC_CLK_YEAR);
+
+ /*
+ * TODO: If century is 0xFF, 100% that the cmos is cleared.
+ * Other than that, so far rtc_year is the only entry to check
+ * if the date is valid.
+ */
+ if (century > 0x99 || year > 0x99) /* Invalid date */
+ cmos_reset_date();
+}
+
+int rtc_set(const struct rtc_time *time){
+ cmos_write(bin2bcd(time->sec), RTC_CLK_SECOND);
+ cmos_write(bin2bcd(time->min), RTC_CLK_MINUTE);
+ cmos_write(bin2bcd(time->hour), RTC_CLK_HOUR);
+ cmos_write(bin2bcd(time->mday), RTC_CLK_DAYOFMONTH);
+ cmos_write(bin2bcd(time->mon), RTC_CLK_MONTH);
+ cmos_write(bin2bcd(time->year % 100), RTC_CLK_YEAR);
+ /* Same assumption as above: We always have RTC_CLK_ALTCENTURY */
+ cmos_write(bin2bcd(time->year / 100), RTC_CLK_ALTCENTURY);
+ cmos_write(bin2bcd(time->wday + 1), RTC_CLK_DAYOFWEEK);
+ return 0;
+}
+
+int rtc_get(struct rtc_time *time)
+{
+ time->sec = bcd2bin(cmos_read(RTC_CLK_SECOND));
+ time->min = bcd2bin(cmos_read(RTC_CLK_MINUTE));
+ time->hour = bcd2bin(cmos_read(RTC_CLK_HOUR));
+ time->mday = bcd2bin(cmos_read(RTC_CLK_DAYOFMONTH));
+ time->mon = bcd2bin(cmos_read(RTC_CLK_MONTH));
+ time->year = bcd2bin(cmos_read(RTC_CLK_YEAR));
+ /* Same assumption as above: We always have RTC_CLK_ALTCENTURY */
+ time->year += bcd2bin(cmos_read(RTC_CLK_ALTCENTURY)) * 100;
+ time->wday = bcd2bin(cmos_read(RTC_CLK_DAYOFWEEK)) - 1;
+ return 0;
+}
diff --git a/src/drivers/pc80/rtc/mc146818rtc_early.c b/src/drivers/pc80/rtc/mc146818rtc_early.c
new file mode 100644
index 0000000..421af2f
--- /dev/null
+++ b/src/drivers/pc80/rtc/mc146818rtc_early.c
@@ -0,0 +1,104 @@
+#include <stdint.h>
+#include <pc80/mc146818rtc.h>
+#include <fallback.h>
+#if CONFIG_USE_OPTION_TABLE
+#include "option_table.h"
+#endif
+
+#ifndef CONFIG_MAX_REBOOT_CNT
+#error "CONFIG_MAX_REBOOT_CNT not defined"
+#endif
+#if CONFIG_MAX_REBOOT_CNT > 15
+#error "CONFIG_MAX_REBOOT_CNT too high"
+#endif
+
+static int cmos_error(void)
+{
+ unsigned char reg_d;
+ /* See if the cmos error condition has been flagged */
+ reg_d = cmos_read(RTC_REG_D);
+ return (reg_d & RTC_VRT) == 0;
+}
+
+static int cmos_chksum_valid(void)
+{
+#if CONFIG_USE_OPTION_TABLE
+ unsigned char addr;
+ u16 sum, old_sum;
+ sum = 0;
+ /* Compute the cmos checksum */
+ for(addr = LB_CKS_RANGE_START; addr <= LB_CKS_RANGE_END; addr++) {
+ sum += cmos_read(addr);
+ }
+
+ /* Read the stored checksum */
+ old_sum = cmos_read(LB_CKS_LOC) << 8;
+ old_sum |= cmos_read(LB_CKS_LOC+1);
+
+ return sum == old_sum;
+#else
+ return 0;
+#endif
+}
+
+
+static inline __attribute__((unused)) int last_boot_normal(void)
+{
+ unsigned char byte;
+ byte = cmos_read(RTC_BOOT_BYTE);
+ return (byte & (1 << 1));
+}
+
+static inline __attribute__((unused)) int do_normal_boot(void)
+{
+ unsigned char byte;
+
+ if (cmos_error() || !cmos_chksum_valid()) {
+ /* There are no impossible values, no checksums so just
+ * trust whatever value we have in the the cmos,
+ * but clear the fallback bit.
+ */
+ byte = cmos_read(RTC_BOOT_BYTE);
+ byte &= 0x0c;
+ byte |= CONFIG_MAX_REBOOT_CNT << 4;
+ cmos_write(byte, RTC_BOOT_BYTE);
+ }
+
+ /* The RTC_BOOT_BYTE is now o.k. see where to go. */
+ byte = cmos_read(RTC_BOOT_BYTE);
+
+ if (!IS_ENABLED(CONFIG_SKIP_MAX_REBOOT_CNT_CLEAR))
+ /* Are we in normal mode? */
+ if (byte & 1)
+ byte &= 0x0f; /* yes, clear the boot count */
+
+ /* Properly set the last boot flag */
+ byte &= 0xfc;
+ if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) {
+ byte |= (1<<1);
+ }
+
+ /* Are we already at the max count? */
+ if ((byte >> 4) < CONFIG_MAX_REBOOT_CNT) {
+ byte += 1 << 4; /* No, add 1 to the count */
+ }
+ else {
+ byte &= 0xfc; /* Yes, put in fallback mode */
+ }
+
+ /* Save the boot byte */
+ cmos_write(byte, RTC_BOOT_BYTE);
+
+ return (byte & (1<<1));
+}
+
+unsigned read_option_lowlevel(unsigned start, unsigned size, unsigned def)
+{
+#if CONFIG_USE_OPTION_TABLE
+ unsigned byte;
+ byte = cmos_read(start/8);
+ return (byte >> (start & 7U)) & ((1U << size) - 1U);
+#else
+ return def;
+#endif
+}
diff --git a/src/drivers/pc80/spkmodem.c b/src/drivers/pc80/spkmodem.c
deleted file mode 100644
index 89773b1..0000000
--- a/src/drivers/pc80/spkmodem.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2013 Vladimir Serbinenko
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <console/console.h>
-#include <arch/io.h>
-#include <console/spkmodem.h>
-#include <cpu/x86/tsc.h>
-
-#define SPEAKER_PIT_FREQUENCY 0x1234dd
-
-
-enum {
- PIT_COUNTER_0 = 0x40,
- PIT_COUNTER_1 = 0x41,
- PIT_COUNTER_2 = 0x42,
- PIT_CTRL = 0x43,
- PIT_SPEAKER_PORT = 0x61,
-};
-
-
-enum {
- PIT_SPK_TMR2 = 0x01,
- PIT_SPK_DATA = 0x02,
- PIT_SPK_TMR2_LATCH = 0x20
-};
-
-enum {
- PIT_CTRL_SELECT_MASK = 0xc0,
- PIT_CTRL_SELECT_0 = 0x00,
- PIT_CTRL_SELECT_1 = 0x40,
- PIT_CTRL_SELECT_2 = 0x80,
-
- PIT_CTRL_READLOAD_MASK= 0x30,
- PIT_CTRL_COUNTER_LATCH = 0x00,
- PIT_CTRL_READLOAD_LSB = 0x10,
- PIT_CTRL_READLOAD_MSB = 0x20,
- PIT_CTRL_READLOAD_WORD = 0x30,
-
- PIT_CTRL_MODE_MASK = 0x0e,
- PIT_CTRL_INTR_ON_TERM = 0x00,
- PIT_CTRL_PROGR_ONE_SHOT = 0x02,
-
- PIT_CTRL_RATE_GEN = 0x04,
-
- PIT_CTRL_SQUAREWAVE_GEN = 0x06,
- PIT_CTRL_SOFTSTROBE = 0x08,
-
- PIT_CTRL_HARDSTROBE = 0x0a,
-
-
- PIT_CTRL_COUNT_MASK = 0x01,
- PIT_CTRL_COUNT_BINARY = 0x00,
- PIT_CTRL_COUNT_BCD = 0x01
-};
-
-
-static void
-make_tone (uint16_t freq_count, unsigned int duration)
-{
- outb (PIT_CTRL_SELECT_2
- | PIT_CTRL_READLOAD_WORD
- | PIT_CTRL_SQUAREWAVE_GEN
- | PIT_CTRL_COUNT_BINARY, PIT_CTRL);
-
- outb (freq_count & 0xff, PIT_COUNTER_2);
-
- outb ((freq_count >> 8) & 0xff, PIT_COUNTER_2);
-
- outb (inb (PIT_SPEAKER_PORT)
- | PIT_SPK_TMR2 | PIT_SPK_DATA,
- PIT_SPEAKER_PORT);
-
- for (; duration; duration--) {
- unsigned short counter, previous_counter = 0xffff;
- while (1) {
- counter = inb (PIT_COUNTER_2);
- counter |= ((uint16_t) inb (PIT_COUNTER_2)) << 8;
- if (counter > previous_counter)
- {
- previous_counter = counter;
- break;
- }
- previous_counter = counter;
- }
- }
-}
-
-void spkmodem_tx_byte(unsigned char c)
-{
- int i;
-
- make_tone (SPEAKER_PIT_FREQUENCY / 200, 4);
- for (i = 7; i >= 0; i--) {
- if ((c >> i) & 1)
- make_tone (SPEAKER_PIT_FREQUENCY / 2000, 20);
- else
- make_tone (SPEAKER_PIT_FREQUENCY / 4000, 40);
- make_tone (SPEAKER_PIT_FREQUENCY / 1000, 10);
- }
- make_tone (SPEAKER_PIT_FREQUENCY / 200, 0);
-}
-
-void spkmodem_init(void)
-{
- /* Some cards need time to come online. Output some message to get it started. */
- spkmodem_tx_byte('S');
- spkmodem_tx_byte('P');
- spkmodem_tx_byte('K');
- spkmodem_tx_byte('\r');
- spkmodem_tx_byte('\n');
-}
diff --git a/src/drivers/pc80/tpm/Makefile.inc b/src/drivers/pc80/tpm/Makefile.inc
index c900fe8..c55ad6a 100644
--- a/src/drivers/pc80/tpm/Makefile.inc
+++ b/src/drivers/pc80/tpm/Makefile.inc
@@ -1,2 +1,6 @@
+ifeq ($(CONFIG_ARCH_X86),y)
+
romstage-$(CONFIG_LPC_TPM) += tpm.c
ramstage-$(CONFIG_LPC_TPM) += tpm.c
+
+endif
diff --git a/src/drivers/pc80/udelay_io.c b/src/drivers/pc80/udelay_io.c
deleted file mode 100644
index 1cdc673..0000000
--- a/src/drivers/pc80/udelay_io.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <arch/io.h>
-#include <delay.h>
-
-void init_timer(void)
-{
-}
-
-void udelay(unsigned usecs)
-{
- int i;
- for(i = 0; i < usecs; i++)
- inb(0x80);
-}
diff --git a/src/drivers/pc80/vga/Makefile.inc b/src/drivers/pc80/vga/Makefile.inc
index d4b726a..3e31de1 100644
--- a/src/drivers/pc80/vga/Makefile.inc
+++ b/src/drivers/pc80/vga/Makefile.inc
@@ -1,4 +1,8 @@
+ifeq ($(CONFIG_ARCH_X86),y)
+
ramstage-$(CONFIG_VGA) += vga_io.c
ramstage-$(CONFIG_VGA) += vga_palette.c
ramstage-$(CONFIG_VGA) += vga_font_8x16.c
ramstage-$(CONFIG_VGA) += vga.c
+
+endif
diff --git a/src/drivers/ricoh/Kconfig b/src/drivers/ricoh/Kconfig
deleted file mode 100644
index 6b05142..0000000
--- a/src/drivers/ricoh/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-source src/drivers/ricoh/rce822/Kconfig
diff --git a/src/drivers/sil/Kconfig b/src/drivers/sil/Kconfig
deleted file mode 100644
index a14515c..0000000
--- a/src/drivers/sil/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-config DRIVERS_SIL_3114
- bool "Silicon Image SIL3114"
- default n
- help
- It sets PCI class to IDE compatible native mode, allowing
- SeaBIOS, FILO etc... to boot from it.
-
-
diff --git a/src/drivers/sil/Makefile.inc b/src/drivers/sil/Makefile.inc
deleted file mode 100644
index 6826fc2..0000000
--- a/src/drivers/sil/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-subdirs-y += 3114
diff --git a/src/drivers/ti/Kconfig b/src/drivers/ti/Kconfig
deleted file mode 100644
index 42ead03..0000000
--- a/src/drivers/ti/Kconfig
+++ /dev/null
@@ -1,21 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2012 The Chromium OS Authors.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-source src/drivers/ti/tps65090/Kconfig
-source src/drivers/ti/tps65913/Kconfig
diff --git a/src/drivers/ti/Makefile.inc b/src/drivers/ti/Makefile.inc
deleted file mode 100644
index 037da94..0000000
--- a/src/drivers/ti/Makefile.inc
+++ /dev/null
@@ -1,22 +0,0 @@
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2012 The Chromium OS Authors.
-## Copyright 2014 Google Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; version 2 of the License.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-subdirs-$(CONFIG_DRIVER_TI_TPS65090) += tps65090/
-subdirs-$(CONFIG_DRIVERS_TI_TPS65913) += tps65913/
diff --git a/src/drivers/trident/Kconfig b/src/drivers/trident/Kconfig
deleted file mode 100644
index 691891d..0000000
--- a/src/drivers/trident/Kconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-source src/drivers/trident/blade3d/Kconfig
-
diff --git a/src/drivers/trident/Makefile.inc b/src/drivers/trident/Makefile.inc
deleted file mode 100644
index 730f8ab..0000000
--- a/src/drivers/trident/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-subdirs-y += blade3d
diff --git a/src/drivers/xgi/Kconfig b/src/drivers/xgi/Kconfig
deleted file mode 100644
index 3e083d6..0000000
--- a/src/drivers/xgi/Kconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-source src/drivers/xgi/common/Kconfig
-source src/drivers/xgi/z9s/Kconfig
\ No newline at end of file
diff --git a/src/drivers/xgi/Makefile.inc b/src/drivers/xgi/Makefile.inc
deleted file mode 100644
index ce83d7a..0000000
--- a/src/drivers/xgi/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-subdirs-y += common z9s
\ No newline at end of file
diff --git a/src/drivers/xpowers/Kconfig b/src/drivers/xpowers/Kconfig
deleted file mode 100644
index 3ac2748..0000000
--- a/src/drivers/xpowers/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-source src/drivers/xpowers/axp209/Kconfig
diff --git a/src/drivers/xpowers/Makefile.inc b/src/drivers/xpowers/Makefile.inc
deleted file mode 100644
index ef6dffc..0000000
--- a/src/drivers/xpowers/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-subdirs-$(CONFIG_DRIVER_XPOWERS_AXP209) += axp209
diff --git a/src/drivers/xpowers/axp209/Makefile.inc b/src/drivers/xpowers/axp209/Makefile.inc
index 5ac691e..e08a8e2 100644
--- a/src/drivers/xpowers/axp209/Makefile.inc
+++ b/src/drivers/xpowers/axp209/Makefile.inc
@@ -1,3 +1,7 @@
-bootblock-$(CONFIG_DRIVER_XPOWERS_AXP209_BOOTBLOCK) += axp209.c
-romstage-$(CONFIG_DRIVER_XPOWERS_AXP209) += axp209.c
-ramstage-$(CONFIG_DRIVER_XPOWERS_AXP209) += axp209.c
+ifeq ($(CONFIG_DRIVER_XPOWERS_AXP209),y)
+
+bootblock-$(CONFIG_DRIVER_XPOWERS_AXP209_BOOTBLOCK) += axp209.c
+romstage-y += axp209.c
+ramstage-y += axp209.c
+
+endif
More information about the coreboot-gerrit
mailing list