[coreboot-gerrit] New patch to review for coreboot: 49f0e2b southbridge/amd/agesa/hudson/Kconfig: Don't build blobs by default
Edward O'Callaghan (eocallaghan@alterapraxis.com)
gerrit at coreboot.org
Wed Dec 3 18:56:04 CET 2014
Edward O'Callaghan (eocallaghan at alterapraxis.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/7638
-gerrit
commit 49f0e2b5af22b0fc697fd3ba6c2c8ca12405aa5e
Author: Edward O'Callaghan <eocallaghan at alterapraxis.com>
Date: Thu Dec 4 04:50:40 2014 +1100
southbridge/amd/agesa/hudson/Kconfig: Don't build blobs by default
Don't build in non-essential blobs by default. Here is a list of
reasons:
1.) XHCI mess with EHCI debug port which is far more important
to work by default.
2.) Coreboot is opensource firmware, not blobboot which uses any
way it can just for USB 3.0 to 'work' by default.
3.) Let boards and/or users /choose to/ include firmware if they
actually /need/ it, not the converse.
Change-Id: Ie90f00d7c18d725f24fe1503fadaf098d3cefa4a
Signed-off-by: Edward O'Callaghan <eocallaghan at alterapraxis.com>
---
src/southbridge/amd/agesa/hudson/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig
index 0779000..3b94c4c 100644
--- a/src/southbridge/amd/agesa/hudson/Kconfig
+++ b/src/southbridge/amd/agesa/hudson/Kconfig
@@ -45,7 +45,7 @@ config EHCI_BAR
config HUDSON_XHCI_ENABLE
bool "Enable Hudson XHCI Controller"
- default y
+ default n
help
The XHCI controller must be enabled and the XHCI firmware
must be added in order to have USB 3.0 support configured
@@ -55,13 +55,13 @@ config HUDSON_XHCI_ENABLE
config HUDSON_XHCI_FWM
bool "Add xhci firmware"
- default y
+ default n
help
Add Hudson 2/3/4 XHCI Firmware to support the onboard USB 3.0
config HUDSON_IMC_FWM
bool "Add imc firmware"
- default y
+ default n
help
Add Hudson 2/3/4 IMC Firmware to support the onboard fan control
More information about the coreboot-gerrit
mailing list