[SeaBIOS] [RFC v2 0/3] Support multiple pci domains in pci_device

[Marcel Apfelbaum]

Hi Kevin,

On 08/28/2018 08:02 PM, Kevin O'Connor wrote:
> On Tue, Aug 28, 2018 at 12:14:58PM +0200, Gerd Hoffmann wrote:
>>    Hi,
>>
>>>> Where is the pxb-pcie device?  0000:$somewhere?  Or $domain:00:00.0?
>>>   0000:$somewhere (On PCI domain 0)
>> Cool, so we don't have an chicken-and-egg issue.
>>
>>>> If we can access pxb-pcie registers before configuring MMCFG then yes,
>>>> we should use pxb-pcie registers for that.
>>> Yes, we can.
>> Ok, so we can configure mmcfg as hidden pci bar, simliar to the q35
>> mmcfg.  Any configuration hints can be passed as pci vendor capability
>> (simliar to the bridge window size hints), if needed.
> Just so I understand, the proposal is to have SeaBIOS search for
> pxb-pcie devices on the main PCI bus and allocate address space for
> each.  (These devices would not be considered pci buses in the
> traditional sense.)  Then SeaBIOS will traverse that address space
> (MMCFG) and allocate BARs (both address space and io space) for the
> PCI devices found in that address space.  Finally, QEMU will take all
> those allocations and use it when generating the ACPI tables.
>
> Did I get that right?

Yes, the pxb-pcie exposes a new PCI root bus, but we want it
in a different PCI domain. This is done in order to remove the
256 PCI Express devices limitation on a PCI Express machine.

Does the plan sounds sane?

Thanks,
Marcel

>
> -Kevin