[SeaBIOS] USB timeout on ALIX.2C2 (CS5536)

Thu Jan 5 08:44:14 CET 2017

On Wed, Jan 4, 2017 at 4:52 PM, Kevin O'Connor <kevin at koconnor.net> wrote:

> On Wed, Jan 04, 2017 at 03:57:33PM +0200, Евгени Димитров wrote:
> > Hi,
> >
> > I'm testing Coreboot with SeaBIOS as payload on my old Alix.2C2. When
> > trying to boot from an USB device I get the following error:
> >
> > Searching bootorder for: /pci at i0cf8/usb at f,5/storage at 2/*@0/*@0,0
> > Searching bootorder for: /pci at i0cf8/usb at f,5/usb-*@2
> > ehci_send_pipe qh=0x000ecf00 dir=0 data=0x00006cf9 size=31
> > ehci_send_pipe qh=0x000ecf80 dir=128 data=0x00006dc4 size=36
> > ehci_send_pipe qh=0x000ecf80 dir=128 data=0x00006cec size=13
> > WARNING - Timeout at ehci_wait_td:516!
> > ehci pipe=0x000ecf80 cur=00000000 tok=00000000 next=6b40 td=0x00006b40
> > status=d0d80
> > USB transmission failed
> > Unable to configure USB MSC drive.
> > phys_free f6030 (detail=0x0f7688a0)
> > Unable to configure USB MSC device.
>
> Did you disable threads in seabios (either via the kconfig option or
> via the /etc/threads runtime option)?  It's not recommended to disable
> threads, and the USB code is less capable of handling timeouts when
> threads are disabled.  Can you retry (and send the log) with threads
> enabled.
>
> If that fails, can you also try disabling CONFIG_USB_EHCI in Kconfig
> and send that log as well.
>
> -Kevin
>

I get the same error with threads enabled. Disabling ehci did not help
either. Logs are attached as requested.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/seabios/attachments/20170105/afda54f6/attachment-0001.html>
-------------- next part --------------
SeaBIOS (version rel-1.10.0-10-g9332965)
BUILD: gcc: (coreboot toolchain v1.43 August 31st, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1
Found coreboot cbmem console @ f7be000
Found mainboard PC Engines ALIX.2C
malloc preinit
Add to e820 map: 000a0000 00050000 -1
Add to e820 map: 000f0000 00010000 2
Add to e820 map: 0f774000 00040000 2
phys_alloc zone=0x000ed650 size=42752 align=20 ret=f769860 (detail=0x0f769830)
Relocating init from 0x000e2fe0 to 0x0f769860 (size 42752)
malloc init
Found CBFS header at 0xfff80138
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769730 (detail=0x0f769700)
Add romfile: cbfs master header (size=32)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769660 (detail=0x0f769630)
Add romfile: fallback/romstage (size=17764)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769590 (detail=0x0f769560)
Add romfile: fallback/ramstage (size=37318)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f7694c0 (detail=0x0f769490)
Add romfile: config (size=249)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f7693f0 (detail=0x0f7693c0)
Add romfile: revision (size=580)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769320 (detail=0x0f7692f0)
Add romfile: fallback/payload (size=63807)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769250 (detail=0x0f769220)
Add romfile: payload_config (size=1574)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f769180 (detail=0x0f769150)
Add romfile: payload_revision (size=239)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f7690b0 (detail=0x0f769080)
Add romfile: vsa (size=57532)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768fe0 (detail=0x0f768fb0)
Add romfile: vgaroms/sgabios.bin (size=4096)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768f10 (detail=0x0f768ee0)
Add romfile: etc/screen-and-debug (size=8)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768e40 (detail=0x0f768e10)
Add romfile: etc/usb-time-sigatt (size=8)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768d70 (detail=0x0f768d40)
Add romfile:  (size=338968)
phys_alloc zone=0x0f773ed0 size=156 align=10 ret=f768ca0 (detail=0x0f768c70)
Add romfile: bootblock (size=768)
multiboot: eax=0, ebx=0
init ivt
init bda
Add to e820 map: 0009fc00 00000400 2
init bios32
init PMM
init PNPBIOS table
init keyboard
init mouse
init pic
math cp init
PCI probe
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768c50 (detail=0x0f768c20)
PCI device 00:01.0 (vd=1022:2080 c=0600)
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768c00 (detail=0x0f768bd0)
PCI device 00:01.2 (vd=1022:2082 c=1010)
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768bb0 (detail=0x0f768b80)
PCI device 00:09.0 (vd=1106:3053 c=0200)
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768b60 (detail=0x0f768b30)
PCI device 00:0b.0 (vd=1006:3053 c=0200)
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768b10 (detail=0x0f768ae0)
PCI device 00:0f.0 (vd=1022:2090 c=0601)
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768ac0 (detail=0x0f768a90)
PCI device 00:0f.2 (vd=1022:209a c=0101)
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768a70 (detail=0x0f768a40)
PCI device 00:0f.4 (vd=1022:2094 c=0c03)
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f768a20 (detail=0x0f7689f0)
PCI device 00:0f.5 (vd=1022:2095 c=0c03)
Found 8 PCI devices (max PCI bus is 00)
Relocating coreboot bios tables
phys_alloc zone=0x0f773ed8 size=31 align=10 ret=f6020 (detail=0x0f7689c0)
Copying SMBIOS entry point from 0x0f7b4000 to 0x000f6020
rsdp=0x00000000
tsc calibrate start=1760251057 end=1761106398 diff=855341
CPU Mhz=498
init timer
Scan for VGA option rom
Copying data 8 at 0xfffad038 to 8 at 0x00006ed4
Copying data 4096 at 0xfffabfc8 to 4096 at 0x000c0000
Checking rom 0x000c0000 (sig aa55 size 8)
Running option rom at c000:0003

Google, Inc.
Serial Graphics Adapter 01/04/17
SGABIOS $Id$ (iddqd at unknown) Wed Jan  4 08:37:21 UTC 2017
Term: 195x50
4 0
Turning on vga text mode console

SeaBIOS (version rel-1.10.0-10-g9332965)
init usb
Copying data 8 at 0xfffad078 to 8 at 0x00006ebc
phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f7689a0 (detail=0x0f768970)
EHCI init on dev 00:0f.5 (regs=0xfe017010)
phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f767000 (detail=0x0f768940)
/0f767000\ Start thread
|0f767000| phys_alloc zone=0x0f773edc size=4096 align=1000 ret=f7b3000 (detail=0x0f768910)
|0f767000| phys_alloc zone=0x0f773edc size=68 align=80 ret=f7b2f80 (detail=0x0f7688e0)
|0f767000| phys_alloc zone=0x0f773edc size=68 align=80 ret=f7b2f00 (detail=0x0f7688b0)
phys_alloc zone=0x0f773ed0 size=20 align=10 ret=f768890 (detail=0x0f768860)
OHCI init on dev 00:0f.4 (regs=0xfe016000)
phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f766000 (detail=0x0f768830)
/0f766000\ Start thread
|0f766000| phys_alloc zone=0x0f773edc size=256 align=100 ret=f7b2e00 (detail=0x0f768800)
|0f766000| phys_alloc zone=0x0f773edc size=16 align=10 ret=f7b2ff0 (detail=0x0f7687d0)
|0f767000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f7687b0 (detail=0x0f768780)
|0f767000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f765000 (detail=0x0f768750)
/0f765000\ Start thread
init ps2port
phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f764000 (detail=0x0f768720)
/0f764000\ Start thread
|0f764000| i8042_flush
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| i8042 flushed ff (status=ff)
|0f764000| WARNING - Timeout at i8042_flush:71!
\0f764000/ End thread
phys_free f764000 (detail=0x0f768720)
|0f767000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768730 (detail=0x0f768700)
|0f767000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f764000 (detail=0x0f7686d0)
/0f764000\ Start thread
init floppy drives
init hard drives
phys_alloc zone=0x0f773ed8 size=20 align=10 ret=f6000 (detail=0x0f7686a0)
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 7a)
phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f763000 (detail=0x0f768670)
/0f763000\ Start thread
|0f763000| powerup iobase=1f0 st=0
|0f763000| powerup iobase=1f0 st=20
|0f763000| ata_detect ata0-0: sc=2a sn=2a dh=20
|0f763000| powerup iobase=1f0 st=2a
|0f763000| powerup iobase=1f0 st=30
|0f763000| ata_detect ata0-1: sc=2a sn=2a dh=30
\0f763000/ End thread
phys_free f763000 (detail=0x0f768670)
|0f766000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768680 (detail=0x0f768650)
|0f766000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f763000 (detail=0x0f768620)
/0f763000\ Start thread
|0f767000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768600 (detail=0x0f7685d0)
|0f767000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f762000 (detail=0x0f7685a0)
/0f762000\ Start thread
|0f765000| set_address 0x0f7689a0
phys_alloc zone=0x0f773ed8 size=20 align=10 ret=f5fe0 (detail=0x0f768570)
ATA controller 2 at 170/374/0 (irq 15 dev 7a)
phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f761000 (detail=0x0f768540)
/0f761000\ Start thread
|0f761000| powerup IDE floating
|0f761000| powerup IDE floating
|0f761000| ata_detect ata1-0: sc=ff sn=ff dh=ff
|0f761000| powerup IDE floating
|0f761000| powerup IDE floating
|0f761000| ata_detect ata1-1: sc=ff sn=ff dh=ff
\0f761000/ End thread
phys_free f761000 (detail=0x0f768540)
|0f766000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768550 (detail=0x0f768520)
|0f766000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f761000 (detail=0x0f7684f0)
/0f761000\ Start thread
|0f767000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f7684d0 (detail=0x0f7684a0)
|0f767000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f760000 (detail=0x0f768470)
/0f760000\ Start thread
|0f765000| ehci_alloc_async_pipe 0x0f7689a0 0
|0f765000| phys_alloc zone=0x0f773ed0 size=92 align=80 ret=f768400 (detail=0x0f7683d0)
|0f765000| ehci_send_pipe qh=0x0f768400 dir=0 data=0x00000000 size=0
init ahci
init megasas
init lpt
Found 0 lpt ports
init serial
Found 2 serial ports
|0f766000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f7683b0 (detail=0x0f768380)
|0f766000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f75f000 (detail=0x0f768350)
/0f75f000\ Start thread
|0f766000| phys_alloc zone=0x0f773ed0 size=28 align=10 ret=f768330 (detail=0x0f768300)
|0f766000| phys_alloc zone=0x0f773ed0 size=4096 align=1000 ret=f75e000 (detail=0x0f7682d0)
/0f75e000\ Start thread
|0f765000| ehci_alloc_async_pipe 0x0f7689a0 0
|0f765000| config_usb: 0x0f768450
|0f765000| ehci_send_pipe qh=0x0f768400 dir=128 data=0x0f765fb6 size=8
|0f765000| device rev=0200 cls=00 sub=00 proto=00 size=64
|0f765000| ehci_alloc_async_pipe 0x0f7689a0 0
|0f765000| ehci_send_pipe qh=0x0f768400 dir=128 data=0x0f765fc8 size=9
|0f765000| phys_alloc zone=0x0f773ed0 size=32 align=10 ret=f7682b0 (detail=0x0f768280)
|0f765000| ehci_send_pipe qh=0x0f768400 dir=128 data=0x0f7682b0 size=32
|0f765000| ehci_send_pipe qh=0x0f768400 dir=0 data=0x00000000 size=0
|0f765000| ehci_alloc_async_pipe 0x0f7689a0 2
|0f765000| phys_alloc zone=0x0f773ee0 size=92 align=80 ret=ecd80 (detail=0x0f768250)
|0f765000| ehci_alloc_async_pipe 0x0f7689a0 2
|0f765000| phys_alloc zone=0x0f773ee0 size=92 align=80 ret=ecd00 (detail=0x0f768220)
|0f765000| ehci_send_pipe qh=0x0f768400 dir=128 data=0x0f765fae size=1
|0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f7681f0)
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/storage at 1/*@0/*@0,0
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/usb-*@1
|0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31
|0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36
|0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765e74 size=13
|0f760000| phys_free f7684d0 (detail=0x0f7684a0)
\0f760000/ End thread
phys_free f760000 (detail=0x0f768470)
|0f762000| phys_free f768600 (detail=0x0f7685d0)
\0f762000/ End thread
phys_free f762000 (detail=0x0f7685a0)
|0f764000| phys_free f768730 (detail=0x0f768700)
\0f764000/ End thread
phys_free f764000 (detail=0x0f7686d0)
|0f75e000| phys_free f768330 (detail=0x0f768300)
\0f75e000/ End thread
phys_free f75e000 (detail=0x0f7682d0)
|0f75f000| phys_free f7683b0 (detail=0x0f768380)
\0f75f000/ End thread
phys_free f75f000 (detail=0x0f768350)
|0f761000| phys_free f768550 (detail=0x0f768520)
\0f761000/ End thread
phys_free f761000 (detail=0x0f7684f0)
|0f763000| phys_free f768680 (detail=0x0f768650)
\0f763000/ End thread
phys_free f763000 (detail=0x0f768620)
|0f766000| ohci_free_pipes 0x0f768890
|0f766000| phys_free f7b2e00 (detail=0x0f768800)
|0f766000| phys_free f7b2ff0 (detail=0x0f7687d0)
\0f766000/ End thread
phys_free f766000 (detail=0x0f768830)
|0f765000| WARNING - Timeout at ehci_wait_td:516!
|0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=d0d80
|0f765000| USB transmission failed
|0f765000| Unable to configure USB MSC drive.
|0f765000| phys_free f5fb0 (detail=0x0f7681f0)
|0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f768830)
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/storage at 1/*@0/*@0,1
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/usb-*@1
|0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31
|0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36
|0f765000| WARNING - Timeout at ehci_wait_td:516!
|0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=240d80
|0f765000| USB transmission failed
|0f765000| Unable to configure USB MSC drive.
|0f765000| phys_free f5fb0 (detail=0x0f768830)
|0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f768830)
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/storage at 1/*@0/*@0,2
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/usb-*@1
|0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31
|0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36
|0f765000| WARNING - Timeout at ehci_wait_td:516!
|0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=240d80
|0f765000| USB transmission failed
|0f765000| Unable to configure USB MSC drive.
|0f765000| phys_free f5fb0 (detail=0x0f768830)
|0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f768830)
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/storage at 1/*@0/*@0,3
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/usb-*@1
|0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31
|0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36
|0f765000| WARNING - Timeout at ehci_wait_td:516!
|0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=240d80
|0f765000| USB transmission failed
|0f765000| Unable to configure USB MSC drive.
|0f765000| phys_free f5fb0 (detail=0x0f768830)
|0f765000| phys_alloc zone=0x0f773ed8 size=48 align=10 ret=f5fb0 (detail=0x0f768830)
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/storage at 1/*@0/*@0,4
|0f765000| Searching bootorder for: /pci at i0cf8/usb at f,5/usb-*@1
|0f765000| ehci_send_pipe qh=0x000ecd00 dir=0 data=0x0f765e81 size=31
|0f765000| ehci_send_pipe qh=0x000ecd80 dir=128 data=0x0f765f4c size=36
|0f765000| WARNING - Timeout at ehci_wait_td:516!
|0f765000| ehci pipe=0x000ecd80 cur=00000000 tok=00000000 next=f765cc0 td=0x0f765cc0 status=240d80
|0f765000| USB transmission failed
|0f765000| Unable to configure USB MSC drive.
|0f765000| phys_free f5fb0 (detail=0x0f768830)
|0f765000| Unable to configure USB MSC device.
|0f765000| phys_free f7682b0 (detail=0x0f768280)
|0f765000| phys_free f7687b0 (detail=0x0f768780)
\0f765000/ End thread
phys_free f765000 (detail=0x0f768750)
|0f767000| ehci_free_pipes 0x0f7689a0
|0f767000| phys_free f768400 (detail=0x0f7683d0)
|0f767000| phys_free ecd00 (detail=0x0f768220)
|0f767000| phys_free ecd80 (detail=0x0f768250)
|0f767000| phys_free f7b3000 (detail=0x0f768910)
|0f767000| phys_free f7b2f80 (detail=0x0f7688e0)
|0f767000| phys_free f7b2f00 (detail=0x0f7688b0)
|0f767000| phys_free f7689a0 (detail=0x0f768970)
\0f767000/ End thread
phys_free f767000 (detail=0x0f768940)
All threads complete.
Scan for option roms
Attempting to init PCI bdf 00:01.0 (vd 1022:2080)
Attempting to map option rom on dev 00:01.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:01.2 (vd 1022:2082)
Attempting to map option rom on dev 00:01.2
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:09.0 (vd 1106:3053)
Attempting to map option rom on dev 00:09.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0b.0 (vd 1006:3053)
Attempting to map option rom on dev 00:0b.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0f.0 (vd 1022:2090)
Attempting to map option rom on dev 00:0f.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0f.2 (vd 1022:209a)
Attempting to map option rom on dev 00:0f.2
Option rom sizing returned 0 0

Press ESC for boot menu.
-------------- next part --------------
SeaBIOS (version rel-1.10.0-10-g9332965)
BUILD: gcc: (coreboot toolchain v1.43 August 31st, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1
Attempting to find coreboot table
Found coreboot table forwarder.
Now attempting to find coreboot memory map
Add to e820 map: 00000000 00001000 2
Add to e820 map: 00001000 0009f000 1
Add to e820 map: 000c0000 0f6f4000 1
Add to e820 map: 0f7b4000 0002c000 2
Add to e820 map: 00000000 00004000 1
SeaBIOS (version rel-1.10.0-10-g9332965)
BUILD: gcc: (coreboot toolchain v1.43 August 31st, 2016) 5.3.0 binutils: (GNU Binutils) 2.26.1
Found coreboot cbmem console @ f7be000
Found mainboard PC Engines ALIX.2C
malloc preinit
Add to e820 map: 000a0000 00050000 -1
Add to e820 map: 000f0000 00010000 2
Add to e820 map: 0f774000 00040000 2
phys_alloc zone=0x000edfb0 size=40928 align=20 ret=f769f80 (detail=0x0f769f50)
Relocating init from 0x000e4040 to 0x0f769f80 (size 40928)
malloc init
Found CBFS header at 0xfff80138
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769e50 (detail=0x0f769e20)
Add romfile: cbfs master header (size=32)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769d80 (detail=0x0f769d50)
Add romfile: fallback/romstage (size=17764)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769cb0 (detail=0x0f769c80)
Add romfile: fallback/ramstage (size=37318)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769be0 (detail=0x0f769bb0)
Add romfile: config (size=249)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769b10 (detail=0x0f769ae0)
Add romfile: revision (size=580)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769a40 (detail=0x0f769a10)
Add romfile: fallback/payload (size=61869)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769970 (detail=0x0f769940)
Add romfile: payload_config (size=1585)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f7698a0 (detail=0x0f769870)
Add romfile: payload_revision (size=239)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f7697d0 (detail=0x0f7697a0)
Add romfile: vsa (size=57532)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769700 (detail=0x0f7696d0)
Add romfile: vgaroms/sgabios.bin (size=4096)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769630 (detail=0x0f769600)
Add romfile: etc/screen-and-debug (size=8)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769560 (detail=0x0f769530)
Add romfile: etc/usb-time-sigatt (size=8)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f769490 (detail=0x0f769460)
Add romfile:  (size=340888)
phys_alloc zone=0x0f773ef0 size=156 align=10 ret=f7693c0 (detail=0x0f769390)
Add romfile: bootblock (size=768)
multiboot: eax=0, ebx=0
init ivt
init bda
Add to e820 map: 0009fc00 00000400 2
init bios32
init PMM
init PNPBIOS table
init keyboard
init mouse
init pic
math cp init
PCI probe
phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769370 (detail=0x0f769340)
PCI device 00:01.0 (vd=1022:2080 c=0600)
phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769320 (detail=0x0f7692f0)
PCI device 00:01.2 (vd=1022:2082 c=1010)
phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f7692d0 (detail=0x0f7692a0)
PCI device 00:09.0 (vd=1106:3053 c=0200)
phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769280 (detail=0x0f769250)
PCI device 00:0b.0 (vd=1106:3053 c=0200)
phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769230 (detail=0x0f769200)
PCI device 00:0f.0 (vd=1022:2090 c=0601)
phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f7691e0 (detail=0x0f7691b0)
PCI device 00:0f.2 (vd=1022:209a c=0101)
phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769190 (detail=0x0f769160)
PCI device 00:0f.4 (vd=1022:2094 c=0c03)
phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f769140 (detail=0x0f769110)
PCI device 00:0f.5 (vd=1022:2095 c=0c03)
Found 8 PCI devices (max PCI bus is 00)
Relocating coreboot bios tables
phys_alloc zone=0x0f773ef8 size=31 align=10 ret=f6520 (detail=0x0f7690e0)
Copying SMBIOS entry point from 0x0f7b4000 to 0x000f6520
rsdp=0x00000000
tsc calibrate start=1760264573 end=1761119884 diff=855311
CPU Mhz=498
init timer
Scan for VGA option rom
Copying data 8 at 0xfffac8b8 to 8 at 0x00006ed4
Copying data 4096 at 0xfffab848 to 4096 at 0x000c0000
Checking rom 0x000c0000 (sig aa55 size 8)
Running option rom at c000:0003

Google, Inc.
Serial Graphics Adapter 01/04/17
SGABIOS $Id$ (iddqd at unknown) Wed Jan  4 08:37:21 UTC 2017
Term: 195x50
4 0
Turning on vga text mode console

SeaBIOS (version rel-1.10.0-10-g9332965)
init usb
Copying data 8 at 0xfffac8f8 to 8 at 0x00006ebc
phys_alloc zone=0x0f773ef0 size=20 align=10 ret=f7690c0 (detail=0x0f769090)
OHCI init on dev 00:0f.4 (regs=0xfe016000)
phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f768000 (detail=0x0f769060)
/0f768000\ Start thread
|0f768000| phys_alloc zone=0x0f773efc size=256 align=100 ret=f7b3f00 (detail=0x0f769030)
|0f768000| phys_alloc zone=0x0f773efc size=16 align=10 ret=f7b3ef0 (detail=0x0f769000)
init ps2port
phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f767000 (detail=0x0f766fd0)
/0f767000\ Start thread
|0f767000| i8042_flush
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| i8042 flushed ff (status=ff)
|0f767000| WARNING - Timeout at i8042_flush:71!
\0f767000/ End thread
phys_free f767000 (detail=0x0f766fd0)
init floppy drives
init hard drives
phys_alloc zone=0x0f773ef8 size=20 align=10 ret=f6500 (detail=0x0f767fd0)
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 7a)
phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f766000 (detail=0x0f767fa0)
/0f766000\ Start thread
|0f766000| powerup iobase=1f0 st=0
|0f766000| powerup iobase=1f0 st=20
|0f766000| ata_detect ata0-0: sc=2a sn=2a dh=20
|0f766000| powerup iobase=1f0 st=2a
|0f766000| powerup iobase=1f0 st=30
|0f766000| ata_detect ata0-1: sc=2a sn=2a dh=30
\0f766000/ End thread
phys_free f766000 (detail=0x0f767fa0)
|0f768000| phys_alloc zone=0x0f773ef0 size=28 align=10 ret=f767fb0 (detail=0x0f767f80)
|0f768000| phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f766000 (detail=0x0f767f50)
/0f766000\ Start thread
phys_alloc zone=0x0f773ef8 size=20 align=10 ret=f64e0 (detail=0x0f767f20)
ATA controller 2 at 170/374/0 (irq 15 dev 7a)
phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f765000 (detail=0x0f767ef0)
/0f765000\ Start thread
|0f765000| powerup IDE floating
|0f765000| powerup IDE floating
|0f765000| ata_detect ata1-0: sc=ff sn=ff dh=ff
|0f765000| powerup IDE floating
|0f765000| powerup IDE floating
|0f765000| ata_detect ata1-1: sc=ff sn=ff dh=ff
\0f765000/ End thread
phys_free f765000 (detail=0x0f767ef0)
|0f768000| phys_alloc zone=0x0f773ef0 size=28 align=10 ret=f767f00 (detail=0x0f767ed0)
|0f768000| phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f765000 (detail=0x0f767ea0)
/0f765000\ Start thread
|0f766000| set_address 0x0f7690c0
init ahci
init megasas
init lpt
Found 0 lpt ports
init serial
Found 2 serial ports
|0f768000| phys_alloc zone=0x0f773ef0 size=28 align=10 ret=f767e80 (detail=0x0f767e50)
|0f768000| phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f764000 (detail=0x0f767e20)
/0f764000\ Start thread
|0f766000| ohci_alloc_async_pipe 0x0f7690c0
|0f766000| phys_alloc zone=0x0f773ef0 size=44 align=10 ret=f767df0 (detail=0x0f767dc0)
|0f766000| ohci_send_pipe 0x0f767e00
|0f768000| phys_alloc zone=0x0f773ef0 size=28 align=10 ret=f767da0 (detail=0x0f767d70)
|0f768000| phys_alloc zone=0x0f773ef0 size=4096 align=1000 ret=f763000 (detail=0x0f767d40)
/0f763000\ Start thread
|0f766000| ohci_alloc_async_pipe 0x0f7690c0
|0f766000| config_usb: 0x0f767e00
|0f766000| ohci_send_pipe 0x0f767e00
|0f766000| device rev=0200 cls=00 sub=00 proto=00 size=64
|0f766000| ohci_alloc_async_pipe 0x0f7690c0
|0f766000| ohci_send_pipe 0x0f767e00
|0f766000| phys_alloc zone=0x0f773ef0 size=32 align=10 ret=f767d20 (detail=0x0f767cf0)
|0f766000| ohci_send_pipe 0x0f767e00
|0f766000| ohci_send_pipe 0x0f767e00
|0f766000| ohci_alloc_async_pipe 0x0f7690c0
|0f766000| phys_alloc zone=0x0f773f00 size=44 align=10 ret=ed750 (detail=0x0f767cc0)
|0f766000| ohci_alloc_async_pipe 0x0f7690c0
|0f766000| phys_alloc zone=0x0f773f00 size=44 align=10 ret=ed720 (detail=0x0f767c90)
|0f766000| ohci_send_pipe 0x0f767e00
|0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767c60)
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/storage at 1/*@0/*@0,0
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/usb-*@1
|0f766000| ohci_send_pipe 0x000ed730
|0f763000| phys_free f767da0 (detail=0x0f767d70)
\0f763000/ End thread
phys_free f763000 (detail=0x0f767d40)
|0f764000| phys_free f767e80 (detail=0x0f767e50)
\0f764000/ End thread
phys_free f764000 (detail=0x0f767e20)
|0f765000| phys_free f767f00 (detail=0x0f767ed0)
\0f765000/ End thread
phys_free f765000 (detail=0x0f767ea0)
|0f766000| WARNING - Timeout at wait_ed:448!
|0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750
|0f766000| USB transmission failed
|0f766000| Unable to configure USB MSC drive.
|0f766000| phys_free f64b0 (detail=0x0f767c60)
|0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767ef0)
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/storage at 1/*@0/*@0,1
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/usb-*@1
|0f766000| ohci_send_pipe 0x000ed730
|0f766000| WARNING - Timeout at wait_ed:448!
|0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750
|0f766000| USB transmission failed
|0f766000| Unable to configure USB MSC drive.
|0f766000| phys_free f64b0 (detail=0x0f767ef0)
|0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767ef0)
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/storage at 1/*@0/*@0,2
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/usb-*@1
|0f766000| ohci_send_pipe 0x000ed730
|0f766000| WARNING - Timeout at wait_ed:448!
|0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750
|0f766000| USB transmission failed
|0f766000| Unable to configure USB MSC drive.
|0f766000| phys_free f64b0 (detail=0x0f767ef0)
|0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767ef0)
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/storage at 1/*@0/*@0,3
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/usb-*@1
|0f766000| ohci_send_pipe 0x000ed730
|0f766000| WARNING - Timeout at wait_ed:448!
|0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750
|0f766000| USB transmission failed
|0f766000| Unable to configure USB MSC drive.
|0f766000| phys_free f64b0 (detail=0x0f767ef0)
|0f766000| phys_alloc zone=0x0f773ef8 size=48 align=10 ret=f64b0 (detail=0x0f767ef0)
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/storage at 1/*@0/*@0,4
|0f766000| Searching bootorder for: /pci at i0cf8/usb at f,4/usb-*@1
|0f766000| ohci_send_pipe 0x000ed730
|0f766000| WARNING - Timeout at wait_ed:448!
|0f766000| ohci ed info=400081 tail=f766d40 head=f766d30 next=ed750
|0f766000| USB transmission failed
|0f766000| Unable to configure USB MSC drive.
|0f766000| phys_free f64b0 (detail=0x0f767ef0)
|0f766000| Unable to configure USB MSC device.
|0f766000| phys_free f767d20 (detail=0x0f767cf0)
|0f766000| phys_free f767fb0 (detail=0x0f767f80)
\0f766000/ End thread
phys_free f766000 (detail=0x0f767f50)
|0f768000| ohci_free_pipes 0x0f7690c0
|0f768000| phys_free f767df0 (detail=0x0f767dc0)
|0f768000| phys_free f7b3f00 (detail=0x0f769030)
|0f768000| phys_free f7b3ef0 (detail=0x0f769000)
\0f768000/ End thread
phys_free f768000 (detail=0x0f769060)
All threads complete.
Scan for option roms
Attempting to init PCI bdf 00:01.0 (vd 1022:2080)
Attempting to map option rom on dev 00:01.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:01.2 (vd 1022:2082)
Attempting to map option rom on dev 00:01.2
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:09.0 (vd 1106:3053)
Attempting to map option rom on dev 00:09.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0b.0 (vd 1106:3053)
Attempting to map option rom on dev 00:0b.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0f.0 (vd 1022:2090)
Attempting to map option rom on dev 00:0f.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0f.2 (vd 1022:209a)
Attempting to map option rom on dev 00:0f.2
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:0f.5 (vd 1022:2095)
Attempting to map option rom on dev 00:0f.5
Option rom sizing returned 0 0

Press ESC for boot menu.