[SeaBIOS] [PATCH v4 3/3] pci: enable RedHat PCI bridges to reserve additional buses on PCI init
Michael S. Tsirkin
mst at redhat.com
Tue Aug 8 17:53:14 CEST 2017
On Sat, Aug 05, 2017 at 11:29:54PM +0300, Aleksandr Bezzubikov wrote:
> In case of Red Hat Generic PCIE Root Port reserve additional buses,
> which number is provided in a vendor-specific capability.
>
> Signed-off-by: Aleksandr Bezzubikov <zuban32s at gmail.com>
> ---
> src/fw/pciinit.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
> src/hw/pci_ids.h | 3 +++
> 2 files changed, 68 insertions(+), 4 deletions(-)
>
> diff --git a/src/fw/pciinit.c b/src/fw/pciinit.c
> index 864954f..d241d66 100644
> --- a/src/fw/pciinit.c
> +++ b/src/fw/pciinit.c
> @@ -15,6 +15,7 @@
> #include "hw/pcidevice.h" // pci_probe_devices
> #include "hw/pci_ids.h" // PCI_VENDOR_ID_INTEL
> #include "hw/pci_regs.h" // PCI_COMMAND
> +#include "fw/dev-pci.h" // qemu_pci_cap
> #include "list.h" // struct hlist_node
> #include "malloc.h" // free
> #include "output.h" // dprintf
> @@ -578,9 +579,42 @@ pci_bios_init_bus_rec(int bus, u8 *pci_bus)
> pci_bios_init_bus_rec(secbus, pci_bus);
>
> if (subbus != *pci_bus) {
> + u8 res_bus = 0;
> + if (pci_config_readw(bdf, PCI_VENDOR_ID) == PCI_VENDOR_ID_REDHAT &&
> + pci_config_readw(bdf, PCI_DEVICE_ID) ==
> + PCI_DEVICE_ID_REDHAT_ROOT_PORT) {
> + u8 cap;
> + do {
> + cap = pci_find_capability(bdf, PCI_CAP_ID_VNDR, 0);
> + } while (cap &&
> + pci_config_readb(bdf, cap + PCI_CAP_REDHAT_TYPE) !=
> + REDHAT_CAP_TYPE_QEMU);
> + if (cap) {
> + u8 cap_len = pci_config_readb(bdf, cap + PCI_CAP_FLAGS);
> + if (cap_len != QEMU_PCI_CAP_SIZE) {
> + dprintf(1, "PCI: QEMU cap length %d is invalid\n",
> + cap_len);
I would do cap_len < QEMU_PCI_CAP_SIZE here - this way you can extend
the capability without breaking things.
> + } else {
> + u32 tmp_res_bus = pci_config_readl(bdf,
> + cap + QEMU_PCI_CAP_BUS_RES);
> + if (tmp_res_bus != (u32)-1) {
> + res_bus = tmp_res_bus & 0xFF;
> + if ((u8)(res_bus + secbus) < secbus ||
> + (u8)(res_bus + secbus) < res_bus) {
> + dprintf(1, "PCI: bus_reserve value %d is invalid\n",
> + res_bus);
> + res_bus = 0;
> + }
> + }
> + }
> + }
> + res_bus = (*pci_bus > secbus + res_bus) ? *pci_bus
> + : secbus + res_bus;
> + }
> dprintf(1, "PCI: subordinate bus = 0x%x -> 0x%x\n",
> - subbus, *pci_bus);
> - subbus = *pci_bus;
> + subbus, res_bus);
> + subbus = res_bus;
> + *pci_bus = res_bus;
> } else {
> dprintf(1, "PCI: subordinate bus = 0x%x\n", subbus);
> }
> @@ -951,11 +985,38 @@ pci_region_map_one_entry(struct pci_region_entry *entry, u64 addr)
>
> u16 bdf = entry->dev->bdf;
> u64 limit = addr + entry->size - 1;
> +
> + if (pci_config_readw(bdf, PCI_VENDOR_ID) == PCI_VENDOR_ID_REDHAT &&
> + pci_config_readw(bdf, PCI_DEVICE_ID) ==
> + PCI_DEVICE_ID_REDHAT_ROOT_PORT) {
> + u8 cap;
> + do {
> + cap = pci_find_capability(bdf, PCI_CAP_ID_VNDR, 0);
> + } while (cap &&
> + pci_config_readb(bdf, cap + PCI_CAP_REDHAT_TYPE) !=
> + REDHAT_CAP_TYPE_QEMU);
> + if (cap) {
> + u8 cap_len = pci_config_readb(bdf, cap + PCI_CAP_FLAGS);
> + if (cap_len != QEMU_PCI_CAP_SIZE) {
> + dprintf(1, "PCI: QEMU cap length %d is invalid\n",
> + cap_len);
Same here.
> + } else {
> + u32 offset = cap + QEMU_PCI_CAP_LIMITS_OFFSET + entry->type * 8;
what is this doing exactly? type is an enum so it's a trick. I'd rather
have an inline with a switch. Use it for bus as well.
> + u64 tmp_limit = (pci_config_readl(bdf, offset) |
> + (u64)pci_config_readl(bdf, offset + 4) << 32);
> + if (tmp_limit != (u64)-1) {
> + tmp_limit += addr - 1;
> + limit = (limit > tmp_limit) ? limit : tmp_limit;
> + }
> + }
> + }
> + }
> +
> if (entry->type == PCI_REGION_TYPE_IO) {
> pci_config_writeb(bdf, PCI_IO_BASE, addr >> PCI_IO_SHIFT);
> - pci_config_writew(bdf, PCI_IO_BASE_UPPER16, 0);
> + pci_config_writew(bdf, PCI_IO_BASE_UPPER16, limit >> 16);
> pci_config_writeb(bdf, PCI_IO_LIMIT, limit >> PCI_IO_SHIFT);
> - pci_config_writew(bdf, PCI_IO_LIMIT_UPPER16, 0);
> + pci_config_writew(bdf, PCI_IO_LIMIT_UPPER16, limit >> 16);
> }
> if (entry->type == PCI_REGION_TYPE_MEM) {
> pci_config_writew(bdf, PCI_MEMORY_BASE, addr >> PCI_MEMORY_SHIFT);
> diff --git a/src/hw/pci_ids.h b/src/hw/pci_ids.h
> index 4ac73b4..38fa2ca 100644
> --- a/src/hw/pci_ids.h
> +++ b/src/hw/pci_ids.h
> @@ -2263,6 +2263,9 @@
> #define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600
> #define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff
>
> +#define PCI_VENDOR_ID_REDHAT 0x1b36
> +#define PCI_DEVICE_ID_REDHAT_ROOT_PORT 0x000C
> +
> #define PCI_VENDOR_ID_TEKRAM 0x1de1
> #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29
>
> --
> 2.7.4
More information about the SeaBIOS
mailing list