[SeaBIOS] [PATCH 00/14] Clean up PCI BAR handling

[Paul Menzel]

Dear Kevin,


Am Samstag, den 06.02.2016, 13:00 -0500 schrieb Kevin O'Connor:
> On Tue, Feb 02, 2016 at 11:18:43PM -0500, Kevin O'Connor wrote:
> > This series adds some helper functions for working with PCI BARs (Base
> > Address Registers), and it then updates all the drivers to use these
> > helper functions.  The new helper functions perform sanity checks on
> > the BARs and make sure the appropriate pci command register flags are
> > enabled.  The existing driver code was inconsistent with these checks.
> > 
> > At the end of this series, the pci->have_driver flag is also
> > consistently set on any PCI device that there is a SeaBIOS driver for.
> > This will make sure SeaBIOS does not attempt to load an option rom for
> > a device that SeaBIOS already has a native driver for.
> 
> FYI, I committed this series.

Just a note, that I successfully tested this on the ASRock E350M1.

Thank you for cleaning up the code!


Thanks,

Paul
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: This is a digitally signed message part
URL: <http://www.seabios.org/pipermail/seabios/attachments/20160207/47c9ae20/attachment.asc>