[SeaBIOS] [PATCH 1/2] ehci: Only delay UHCI/OHCI port scan until after EHCI setup completes

[Kevin O'Connor]

EHCI controller setup needs to occur prior to checking any UHCI or
OHCI ports to ensure a high speed device is not mistakenly configured
on a full speed "companion" controller.  However, only the UHCI/OHCI
port scan needs to be delayed, not the full UHCI/OHCI controller init.

This change moves back the ehci controller setup check until port
scan in UHCI/OHCI.

Signed-off-by: Kevin O'Connor <kevin at koconnor.net>
---
 src/hw/usb-ehci.c | 8 ++++++--
 src/hw/usb-ehci.h | 1 +
 src/hw/usb-ohci.c | 3 +++
 src/hw/usb-uhci.c | 4 ++++
 4 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/src/hw/usb-ehci.c b/src/hw/usb-ehci.c
index 41f8579..010746c 100644
--- a/src/hw/usb-ehci.c
+++ b/src/hw/usb-ehci.c
@@ -337,9 +337,13 @@ ehci_setup(void)
         if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_EHCI)
             ehci_controller_setup(pci);
     }
+}
 
-    // Wait for all EHCI controllers to initialize.  This forces OHCI/UHCI
-    // setup to always be after any EHCI ports are routed to EHCI.
+// Wait for all EHCI controllers to initialize.  This forces OHCI/UHCI
+// setup to always be after any EHCI ports are routed to EHCI.
+void
+ehci_wait_controllers(void)
+{
     while (PendingEHCI)
         yield();
 }
diff --git a/src/hw/usb-ehci.h b/src/hw/usb-ehci.h
index 88f7b6a..0442188 100644
--- a/src/hw/usb-ehci.h
+++ b/src/hw/usb-ehci.h
@@ -3,6 +3,7 @@
 
 // usb-ehci.c
 void ehci_setup(void);
+void ehci_wait_controllers(void);
 struct usbdevice_s;
 struct usb_endpoint_descriptor;
 struct usb_pipe;
diff --git a/src/hw/usb-ohci.c b/src/hw/usb-ohci.c
index 42f8a06..7ed964f 100644
--- a/src/hw/usb-ohci.c
+++ b/src/hw/usb-ohci.c
@@ -14,6 +14,7 @@
 #include "pci_regs.h" // PCI_BASE_ADDRESS_0
 #include "string.h" // memset
 #include "usb.h" // struct usb_s
+#include "usb-ehci.h" // ehci_wait_controllers
 #include "usb-ohci.h" // struct ohci_hcca
 #include "util.h" // msleep
 #include "x86.h" // readl
@@ -96,6 +97,8 @@ static int
 check_ohci_ports(struct usb_ohci_s *cntl)
 {
     ASSERT32FLAT();
+    // Wait for ehci init - in case this is a "companion controller"
+    ehci_wait_controllers();
     // Turn on power for all devices on roothub.
     u32 rha = readl(&cntl->regs->roothub_a);
     rha &= ~(RH_A_PSM | RH_A_OCPM);
diff --git a/src/hw/usb-uhci.c b/src/hw/usb-uhci.c
index 69c33ee..6d8aa47 100644
--- a/src/hw/usb-uhci.c
+++ b/src/hw/usb-uhci.c
@@ -13,6 +13,7 @@
 #include "pci_regs.h" // PCI_BASE_ADDRESS_4
 #include "string.h" // memset
 #include "usb.h" // struct usb_s
+#include "usb-ehci.h" // ehci_wait_controllers
 #include "usb-uhci.h" // USBLEGSUP
 #include "util.h" // msleep
 #include "x86.h" // outw
@@ -94,6 +95,9 @@ static int
 check_uhci_ports(struct usb_uhci_s *cntl)
 {
     ASSERT32FLAT();
+    // Wait for ehci init - in case this is a "companion controller"
+    ehci_wait_controllers();
+
     struct usbhub_s hub;
     memset(&hub, 0, sizeof(hub));
     hub.cntl = &cntl->usb;
-- 
2.5.0