[SeaBIOS] Unremovable USB3 device can not be detected after reboot

[Idwer Vollering]

)

2015-08-28 0:35 GMT+02:00 Zheng Bao <fishbaoz at hotmail.com>:
> I also guss it is a device issue,but AMI works well.

Thank you for looking into this.

Does AMD have an FAE/IBV contact at AMI?
Can you ask your AMI contact what their solution was, to make it
possible to boot off superspeed devices?

For reference, the build that worked is 6402 [1].

Thanks,

Idwer

[1] http://www.asus.com/nl/Motherboards/F2A85M/HelpDesk_Download/

>
>> Date: Thu, 27 Aug 2015 11:16:29 -0400
>> From: kevin at koconnor.net
>> To: fishbaoz at hotmail.com
>> CC: seabios at seabios.org
>> Subject: Re: [SeaBIOS] Unremovable USB3 device can not be detected after
>> reboot
>>
>> On Thu, Aug 27, 2015 at 03:47:02AM +0000, Zheng Bao wrote:
>> > Fist time: Power up, SeaGate USB hard drive can be detected.
>> > ------------------------------------------------------   start
>> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150826_232532-supersrv)
>> [...]
>> >
>> > -----------------------------------------------------------------------------
>> > end
>> >
>> > Second time: Press reset button. The SeaGate USB3 hard drive can not be
>> > detected.
>> >
>> > ---------------------------------------------------------------------------------
>> > start
>> > SeaBIOS (version rel-1.8.0-0-g4c59f5d-dirty-20150826_232532-supersrv)
>> [...]
>> > |aff4a000| xhci_alloc_pipe: usbdev 0xaff4f520, ring 0xaff9e100, slotid
>> > 0, epid 1
>> > |aff4a000| xhci_cmd_enable_slot:
>> > |aff4a000| xhci_trb_queue: ring 0xaff9ed00 [nidx 1, len 0]
>> > |aff4a000| xhci_process_events: status change port #5
>> > |aff4a000| xhci_process_events: status change port #1
>> > |aff4a000| xhci_process_events: status change port #5
>> > |aff4a000| xhci_process_events: ring 0xaff9ed00 [trb 0xaff9ed00, evt
>> > 0xaff9ee00, type 33, eidx 1, cc 1]
>> > |aff4a000| xhci_alloc_pipe: enable slot: got slotid 1
>> > |aff4a000| xhci_cmd_address_device: slotid 1
>> > |aff4a000| xhci_trb_queue: ring 0xaff9ed00 [nidx 2, len 0]
>> > |aff4a000| xhci_process_events: ring 0xaff9ed00 [trb 0xaff9ed10, evt
>> > 0xaff9ee00, type 33, eidx 2, cc 4]
>> > |aff4a000| xhci_alloc_pipe: address device: failed (cc 4)
>> > \aff4a000/ End thread
>>
>> A cc=4 is a "USB Transaction Error". So, it looks like the device is
>> being quirky.
>>
>> Is it possible you could try different types of USB3 drives in this
>> machine?
>>
>> Ideally, SeaBIOS would have generic USB retry logic to try and handle
>> weird errors like this. It's a bit of work to implement that though.
>>
>> -Kevin
>
> _______________________________________________
> SeaBIOS mailing list
> SeaBIOS at seabios.org
> http://www.seabios.org/mailman/listinfo/seabios