[SeaBIOS] [PATCH 0/9] Refactor USB send_bulk and send_control
Kevin O'Connor
kevin at koconnor.net
Fri Jan 9 20:18:00 CET 2015
On Wed, Dec 31, 2014 at 07:57:21PM -0500, Kevin O'Connor wrote:
> This series refactors parts of the internal USB driver code interface.
> It merges the ?hci_send_bulk() and ?hci_send_control() functions into
> one function ?hci_send_pipe(). The control and bulk transmission
> functions were similar, but often had slightly different
> implementations and quirks. Unifying them reduces the overall code
> size. It also makes it easier to issue control commands at run-time,
> which should make it easier for future enhancements (such as keyboard
> led control).
>
> I tested this on qemu and with a bunch of devices on my c720 and
> e350m1. However, I don't have a uhci board readily available. I'll
> have to dust off my via board and see if it still works. If others
> can run some tests that would be appreciated.
>
> In the process of testing this series, I found that USB3 hubs aren't
> working that great - I sometimes get timeout messages on my e350m1
> (though all functionality still works), and usb3 hubs aren't working
> on my c720. This does not look to be a regression though. (It does
> seem that USB3 hubs still need more work though).
>
> This series is also available at:
> https://github.com/KevinOConnor/seabios/tree/testing
FYI, I pushed this series (with a few changes to it) to the main repo.
-Kevin
More information about the SeaBIOS
mailing list