[SeaBIOS] SeaBIOS not fully working when compiled on FreeBSD
Roger Pau Monné
roger.pau at citrix.com
Wed Apr 15 19:53:26 CEST 2015
El 15/04/15 a les 19.31, Roger Pau Monné ha escrit:
> Hello,
>
> I've compiled SeaBIOS on FreeBSD with gcc48, and although the build
> process succeeds, the resulting binary doesn't fully work. Most
> functions seem to work fine but there are some int15h functions that
> don't work properly (ie: they return invalid values).
>
> I've compiled SeaBIOS with CONFIG_DEBUG_LEVEL=10 and got the following
> output (this is from the Xen console):
>
> [...]
> (d4) enter handle_1a:
> (d4) a=00000200 b=00000000 c=00001725 d=00003400 ds=4cf0 es=9eb8 ss=dd00
> (d4) si=00000004 di=00000000 bp=00000000 sp=0000fe66 cs=0000 ip=9336 f=0242
> (d4) enter handle_1a:
> (d4) a=00000200 b=00000000 c=00001725 d=00003400 ds=4cf0 es=9eb8 ss=dd00
> (d4) si=00000004 di=00000000 bp=00000000 sp=0000fe66 cs=0000 ip=9336 f=0242
> (d4) enter handle_1a:
> (d4) a=00000200 b=00000000 c=00001725 d=00003400 ds=4cf0 es=9eb8 (XEN) irq.c:386: Dom4 callback via changed to Direct Vector 0x93
> (XEN) irq.c:276: Dom4 PCI link 0 changed 5 -> 0
> (XEN) irq.c:276: Dom4 PCI link 1 changed 10 -> 0
> (XEN) irq.c:276: Dom4 PCI link 2 changed 11 -> 0
> (XEN) irq.c:276: Dom4 PCI link 3 changed 5 -> 0
> (d4) enter handle_15:
>
> And that's all, there's no line containing the register values. I'm
> quite lost at figuring what's going on, so any help about how to
> proceed in order to debug this is highly appreciated.
Forgot to add that using the SeaBIOS binary built on FreeBSD on Linux
shows the same behaviour, while using a SeaBIOS built on Linux on
FreeBSD works perfectly fine.
Roger.
More information about the SeaBIOS
mailing list