[SeaBIOS] [RFC] vgahooks: Add Google stumpy, lumpy, and link boards to intel vgahook list.

[Kevin O'Connor]

Add in the detection for a handful of additional boards found in the
Chromium repo.  This ports over and simplifies the code in that repo.

Signed-off-by: Kevin O'Connor <kevin at koconnor.net>
---

Are these boards in active distribution and is it worth having them in
the seabios main repo?

---
 src/vgahooks.c | 90 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 88 insertions(+), 2 deletions(-)

diff --git a/src/vgahooks.c b/src/vgahooks.c
index 6a4acfe..f7bf660 100644
--- a/src/vgahooks.c
+++ b/src/vgahooks.c
@@ -32,6 +32,7 @@ handle_157fXX(struct bregs *regs)
     set_code_unimplemented(regs, RET_EUNSUPPORTED);
 }
 
+
 /****************************************************************
  * Via hooks
  ****************************************************************/
@@ -175,7 +176,16 @@ via_setup(struct pci_device *pci)
  * Intel VGA hooks
  ****************************************************************/
 
-u8 IntelDisplayType VARFSEG, IntelDisplayId VARFSEG;
+u8 IntelDisplayType VARFSEG, IntelDisplayId VARFSEG, IntelPanelFitting VARFSEG;
+u16 IntelActiveLFP VARFSEG;
+
+static void
+intel_155f34(struct bregs *regs)
+{
+    regs->ax = 0x005f;
+    regs->cl = GET_GLOBAL(IntelPanelFitting);
+    set_success(regs);
+}
 
 static void
 intel_155f35(struct bregs *regs)
@@ -194,6 +204,43 @@ intel_155f40(struct bregs *regs)
 }
 
 static void
+intel_155f51(struct bregs *regs)
+{
+    regs->ax = 0x005f;
+    regs->cx = GET_GLOBAL(IntelActiveLFP);
+    set_success(regs);
+}
+
+static void
+intel_155f70(struct bregs *regs)
+{
+    switch (regs->ch) {
+    case 0:
+        /* Get Mux */
+        regs->ax = 0x005f;
+        regs->cx = 0x0000;
+        set_success(regs);
+        break;
+    case 1:
+        /* Set Mux */
+        regs->ax = 0x005f;
+        regs->cx = 0x0000;
+        set_success(regs);
+        break;
+    case 2:
+        /* Get SG/Non-SG mode */
+        regs->ax = 0x005f;
+        regs->cx = 0x0000;
+        set_success(regs);
+        break;
+    default:
+        /* Interrupt was not handled */
+        handle_155fXX(regs);
+        break;
+    }
+}
+
+static void
 intel_155f50(struct bregs *regs)
 {
     /* Mandatory hook on some Dell laptops */
@@ -205,9 +252,12 @@ static void
 intel_155f(struct bregs *regs)
 {
     switch (regs->al) {
+    case 0x34: intel_155f34(regs); break;
     case 0x35: intel_155f35(regs); break;
     case 0x40: intel_155f40(regs); break;
     case 0x50: intel_155f50(regs); break;
+    case 0x51: intel_155f51(regs); break;
+    case 0x70: intel_155f70(regs); break;
     default:   handle_155fXX(regs); break;
     }
 }
@@ -254,6 +304,34 @@ getac_setup(struct pci_device *pci)
 {
 }
 
+static void
+stumpy_setup(struct pci_device *pci)
+{
+    VGAHookHandlerType = VH_INTEL;
+    IntelPanelFitting = 0;
+    IntelDisplayType = BOOT_DISPLAY_DEFAULT;
+    IntelActiveLFP = 0x0003;
+}
+
+static void
+lumpy_setup(struct pci_device *pci)
+{
+    VGAHookHandlerType = VH_INTEL;
+    IntelPanelFitting = 0;
+    IntelDisplayType = BOOT_DISPLAY_DEFAULT;
+    IntelActiveLFP = 0x0001;
+}
+
+static void
+link_setup(struct pci_device *pci)
+{
+    VGAHookHandlerType = VH_INTEL;
+    IntelPanelFitting = 0;
+    IntelDisplayType = BOOT_DISPLAY_DEFAULT;
+    IntelActiveLFP = 0x0003;
+}
+
+
 /****************************************************************
  * Silicon Motion hooks
  ****************************************************************/
@@ -295,6 +373,7 @@ winent_mb6047_setup(struct pci_device *pci)
     SmiBootDisplay = 0x02;
 }
 
+
 /****************************************************************
  * Entry and setup
  ****************************************************************/
@@ -345,7 +424,14 @@ vgahook_setup(struct pci_device *pci)
         getac_setup(pci);
     else if (strcmp(CBvendor, "RODA") == 0 && strcmp(CBpart, "RK886EX") == 0)
         roda_setup(pci);
-    else if (strcmp(CBvendor, "Win Enterprise") == 0 && strcmp(CBpart, "MB6047") == 0)
+    else if (strcmp(CBvendor, "SAMSUNG") == 0 && strcmp(CBpart, "Stumpy") == 0)
+        stumpy_setup(pci);
+    else if (strcmp(CBvendor, "SAMSUNG") == 0 && strcmp(CBpart, "Lumpy") == 0)
+        lumpy_setup(pci);
+    else if (strcmp(CBvendor, "GOOGLE") == 0 && strcmp(CBpart, "Link") == 0)
+        link_setup(pci);
+    else if (strcmp(CBvendor, "Win Enterprise") == 0
+             && strcmp(CBpart, "MB6047") == 0)
         winent_mb6047_setup(pci);
     else if (pci->vendor == PCI_VENDOR_ID_VIA)
         via_setup(pci);
-- 
1.8.3.1