[SeaBIOS] [PATCH] apm: Remove old Bochs mechanism for shutdown/suspend/standby.

Kevin O'Connor kevin at koconnor.net
Mon Apr 7 23:55:11 CEST 2014


Remove the old mechanism that used port 0x8900 to send apm signals.
Recent versions of QEMU no longer support this port.  Bochs and QEMU
only ever supported shutdown anyway, and shutdown is already available
via an ACPI mechanism.

Signed-off-by: Kevin O'Connor <kevin at koconnor.net>
---
 src/apm.c         | 34 ++++++----------------------------
 src/fw/paravirt.h |  1 -
 2 files changed, 6 insertions(+), 29 deletions(-)

diff --git a/src/apm.c b/src/apm.c
index fd71a01..f7c2306 100644
--- a/src/apm.c
+++ b/src/apm.c
@@ -9,30 +9,11 @@
 #include "biosvar.h" // GET_GLOBAL
 #include "bregs.h" // struct bregs
 #include "config.h" // CONFIG_*
-#include "fw/paravirt.h" // runningOnQEMU
 #include "output.h" // dprintf
 #include "stacks.h" // yield_toirq
 #include "util.h" // apm_shutdown
 #include "x86.h" // outb
 
-static void
-out_str(const char *str_cs)
-{
-    if (!runningOnQEMU()) {
-        dprintf(1, "APM request '%s'\n", str_cs);
-        return;
-    }
-
-    u8 *s = (u8*)str_cs;
-    for (;;) {
-        u8 c = GET_GLOBAL(*s);
-        if (!c)
-            break;
-        outb(c, PORT_BIOS_APM);
-        s++;
-    }
-}
-
 // APM installation check
 static void
 handle_155300(struct bregs *regs)
@@ -54,14 +35,11 @@ handle_155301(struct bregs *regs)
     set_success(regs);
 }
 
-// Assembler entry points defined in romlayout.S
-extern void entry_apm16(void);
-extern void entry_apm32(void);
-
 // APM 16 bit protected mode interface connect
 static void
 handle_155302(struct bregs *regs)
 {
+    extern void entry_apm16(void);
     regs->bx = (u32)entry_apm16;
     regs->ax = SEG_BIOS; // 16 bit code segment base
     regs->si = 0xfff0;   // 16 bit code segment size
@@ -74,6 +52,7 @@ handle_155302(struct bregs *regs)
 static void
 handle_155303(struct bregs *regs)
 {
+    extern void entry_apm32(void);
     regs->ax = SEG_BIOS; // 32 bit code segment base
     regs->ebx = (u32)entry_apm32;
     regs->cx = SEG_BIOS; // 16 bit code segment base
@@ -111,11 +90,10 @@ void
 apm_shutdown(void)
 {
     u16 pm1a_cnt = GET_GLOBAL(acpi_pm1a_cnt);
-
-    irq_disable();
     if (pm1a_cnt)
         outw(0x2000, pm1a_cnt);
-    out_str("Shutdown");
+
+    irq_disable();
     for (;;)
         hlt();
 }
@@ -130,10 +108,10 @@ handle_155307(struct bregs *regs)
     }
     switch (regs->cx) {
     case 1:
-        out_str("Standby");
+        dprintf(1, "APM standby request\n");
         break;
     case 2:
-        out_str("Suspend");
+        dprintf(1, "APM suspend request\n");
         break;
     case 3:
         apm_shutdown();
diff --git a/src/fw/paravirt.h b/src/fw/paravirt.h
index 69d7248..04fb4b9 100644
--- a/src/fw/paravirt.h
+++ b/src/fw/paravirt.h
@@ -31,7 +31,6 @@ static inline int runningOnKVM(void) {
 #define PORT_QEMU_CFG_DATA     0x0511
 #define PORT_ACPI_PM_BASE      0xb000
 #define PORT_SMB_BASE          0xb100
-#define PORT_BIOS_APM          0x8900
 
 void qemu_preinit(void);
 void qemu_platform_setup(void);
-- 
1.9.0




More information about the SeaBIOS mailing list