[SeaBIOS] [PATCH v3] pciinit: Enable default VGA device

Alex Williamson alex.williamson at redhat.com
Wed Mar 20 17:58:47 CET 2013


As QEMU gains PCI bridge and PCIe root port support, we won't always
find the VGA device on the root bus.  We therefore need to add support
to find and enable a VGA device and the path to it through the VGA
Enable support in the PCI bridge control register.

Signed-off-by: Alex Williamson <alex.williamson at redhat.com>
---

v3: use pci_config_maskw() to trim out some code
v2: move to qemu specific pciinit.c

 src/optionroms.c |    2 +-
 src/pciinit.c    |   40 ++++++++++++++++++++++++++++++++++++++++
 src/util.h       |    1 +
 3 files changed, 42 insertions(+), 1 deletion(-)

diff --git a/src/optionroms.c b/src/optionroms.c
index caa2151..ac92613 100644
--- a/src/optionroms.c
+++ b/src/optionroms.c
@@ -213,7 +213,7 @@ run_file_roms(const char *prefix, int isvga, u64 *sources)
  ****************************************************************/
 
 // Verify device is a vga device with legacy address decoding enabled.
-static int
+int
 is_pci_vga(struct pci_device *pci)
 {
     if (pci->class != PCI_CLASS_DISPLAY_VGA)
diff --git a/src/pciinit.c b/src/pciinit.c
index ce0a4cc..bb9355f 100644
--- a/src/pciinit.c
+++ b/src/pciinit.c
@@ -316,6 +316,44 @@ static void pci_bios_init_devices(void)
     }
 }
 
+static void pci_enable_default_vga(void)
+{
+    struct pci_device *pci;
+
+    foreachpci(pci) {
+        if (is_pci_vga(pci)) {
+            dprintf(1, "PCI: Using %02x:%02x.%x for primary VGA\n",
+                    pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf),
+                    pci_bdf_to_fn(pci->bdf));
+            return;
+        }
+    }
+
+    pci = pci_find_class(PCI_CLASS_DISPLAY_VGA);
+    if (!pci) {
+        dprintf(1, "PCI: No VGA devices found\n");
+        return;
+    }
+
+    dprintf(1, "PCI: Enabling %02x:%02x.%x for primary VGA\n",
+            pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf),
+            pci_bdf_to_fn(pci->bdf));
+
+    pci_config_maskw(pci->bdf, PCI_COMMAND, 0,
+                     PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+
+    while (pci->parent) {
+        pci = pci->parent;
+
+        dprintf(1, "PCI: Setting VGA enable on bridge %02x:%02x.%x\n",
+                pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf),
+                pci_bdf_to_fn(pci->bdf));
+
+        pci_config_maskw(pci->bdf, PCI_BRIDGE_CONTROL, 0, PCI_BRIDGE_CTL_VGA);
+        pci_config_maskw(pci->bdf, PCI_COMMAND, 0,
+                         PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+    }
+}
 
 /****************************************************************
  * Platform device initialization
@@ -804,4 +842,6 @@ pci_setup(void)
     pci_bios_init_devices();
 
     free(busses);
+
+    pci_enable_default_vga();
 }
diff --git a/src/util.h b/src/util.h
index af029fc..99aff78 100644
--- a/src/util.h
+++ b/src/util.h
@@ -344,6 +344,7 @@ void vgahook_setup(struct pci_device *pci);
 
 // optionroms.c
 void call_bcv(u16 seg, u16 ip);
+int is_pci_vga(struct pci_device *pci);
 void optionrom_setup(void);
 void vgarom_setup(void);
 void s3_resume_vga(void);




More information about the SeaBIOS mailing list