[SeaBIOS] Minimal config for booting GRUB2 from SATA drive
kevin at koconnor.net
Fri Mar 15 00:35:49 CET 2013
On Thu, Mar 14, 2013 at 03:57:00PM +0100, Paul Menzel wrote:
> Dear SeaBIOS folks,
> I am using coreboot on the ASRock E350M1  with a SATA hard drive, I
> want to boot from using the GRUB2 bootloader. For now I’d like to use
> SeaBIOS 220.127.116.11 for jumping to the hard drive and execute(?) GRUB2.
> Using the default config file created by `make menuconfig` and selecting
> a coreboot build and serial debug, everything works fine.
> As I am using Debian GNU/Linux I do not need any BIOS calls provided by
> SeaBIOS and want to disable as much as possible too. So I disabled most
> stuff, but could not boot from the hard drive.
Can you up the debug level to 8 on the failed boot case and report the
More information about the SeaBIOS