[SeaBIOS] [coreboot] [SimNow] PORT_IRQ_STAT register is 0 in ahci_port_setup

WANG Siyuan wangsiyuanbuaa at gmail.com
Fri Mar 8 02:37:23 CET 2013

Thank you,
1) It is time out, the log is:

AHCI/0: probing
AHCI/0: link up
AHCI/0: send cmd ...
WARNING - Timeout at ahci_command:158!
AHCI/0: send cmd ...
WARNING - Timeout at ahci_command:158!

in line 158(src/ahci.c) is warn_timeout();

2) If ahci is disabled, the simulator can not find hard disk image.
The hard disk image is added as a sata device.

3) The attachment is the log of seabios stage.

Thank you again!

On Fri, Mar 8, 2013 at 7:34 AM, Kevin O'Connor <kevin at koconnor.net> wrote:
> On Thu, Mar 07, 2013 at 04:59:43PM +0800, WANG Siyuan wrote:
>> Hi,
>> I am trying to boot a hard disk image using coreboot and seabios on
>> SimNow Simulator.
>> The system stops at seabios stage.
>> PORT_CMD_START fails in function ahci_port_setup (seabios/src/ahci.c),
>> Then I traced into function ahci_command (seabios/src/ahci.c), I found
>> the value of register ORT_IRQ_STAT is always 0:
>> intbits = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT);
>> intbits returns 0 all the time, so system stops here until time out.
>> Any comments would be appreciated.
> There is a 32 second timeout in that code (which may be a longer wall
> time if run under a simulator) - are you sure it didn't eventually
> time out.  As to why it is taking so long - could be an error in the
> simulator or in the seabios driver.  You could try disabling the ahci
> code in seabios via kconfig.
> -Kevin

Yours sincerely,
WANG Siyuan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: seabios.log
Type: application/octet-stream
Size: 10559 bytes
Desc: not available
URL: <http://www.seabios.org/pipermail/seabios/attachments/20130308/b8519dba/attachment.obj>

More information about the SeaBIOS mailing list