[SeaBIOS] [RFC PATCH v3 07/19] acpi_piix4: Implement memory device hotplug registers
Blue Swirl
blauwirbel at gmail.com
Sat Sep 22 15:49:05 CEST 2012
On Fri, Sep 21, 2012 at 11:17 AM, Vasilis Liaskovitis
<vasilis.liaskovitis at profitbricks.com> wrote:
> A 32-byte register is used to present up to 256 hotplug-able memory devices
> to BIOS and OSPM. Hot-add and hot-remove functions trigger an ACPI hotplug
> event through these. Only reads are allowed from these registers.
>
> An ACPI hot-remove event but needs to wait for OSPM to eject the device.
> We use a single-byte register to know when OSPM has called the _EJ function
> for a particular dimm. A write to this byte will depopulate the respective dimm.
> Only writes are allowed to this byte.
>
> v1->v2:
> mems_sts address moved from 0xaf20 to 0xaf80 (to accomodate more space for
> cpu-hotplugging in the future).
> _EJ array is reduced to a single byte.
> Add documentation in docs/specs/acpi_hotplug.txt
>
> v2->v3:
> minor name changes
>
> Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis at profitbricks.com>
> ---
> docs/specs/acpi_hotplug.txt | 22 +++++++++++++
> hw/acpi_piix4.c | 73 ++++++++++++++++++++++++++++++++++++++++--
> 2 files changed, 91 insertions(+), 4 deletions(-)
> create mode 100644 docs/specs/acpi_hotplug.txt
>
> diff --git a/docs/specs/acpi_hotplug.txt b/docs/specs/acpi_hotplug.txt
> new file mode 100644
> index 0000000..cf86242
> --- /dev/null
> +++ b/docs/specs/acpi_hotplug.txt
> @@ -0,0 +1,22 @@
> +QEMU<->ACPI BIOS hotplug interface
> +--------------------------------------
> +This document describes the interface between QEMU and the ACPI BIOS for non-PCI
> +space. For the PCI interface please look at docs/specs/acpi_pci_hotplug.txt
> +
> +QEMU<->ACPI BIOS memory hotplug interface
> +--------------------------------------
> +
> +Memory Dimm status array (IO port 0xaf80-0xaf9f, 1-byte access):
> +---------------------------------------------------------------
> +Dimm hot-plug notification pending. One bit per slot.
> +
> +Read by ACPI BIOS GPE.3 handler to notify OS of memory hot-add or hot-remove
> +events. Read-only.
> +
> +Memory Dimm ejection success notification (IO port 0xafa0, 1-byte access):
> +---------------------------------------------------------------
> +Dimm hot-remove _EJ0 notification. Byte value indicates Dimm slot that was
> +ejected.
> +
> +Written by ACPI memory device _EJ0 method to notify qemu of successfull
> +hot-removal. Write-only.
> diff --git a/hw/acpi_piix4.c b/hw/acpi_piix4.c
> index c56220b..8776669 100644
> --- a/hw/acpi_piix4.c
> +++ b/hw/acpi_piix4.c
> @@ -28,6 +28,8 @@
> #include "range.h"
> #include "ioport.h"
> #include "fw_cfg.h"
> +#include "sysbus.h"
> +#include "dimm.h"
>
> //#define DEBUG
>
> @@ -45,9 +47,15 @@
> #define PCI_DOWN_BASE 0xae04
> #define PCI_EJ_BASE 0xae08
> #define PCI_RMV_BASE 0xae0c
> +#define MEM_BASE 0xaf80
> +#define MEM_EJ_BASE 0xafa0
>
> +#define PIIX4_MEM_HOTPLUG_STATUS 8
> #define PIIX4_PCI_HOTPLUG_STATUS 2
>
> +struct gpe_regs {
GPERegs
> + uint8_t mems_sts[DIMM_BITMAP_BYTES];
> +};
> struct pci_status {
> uint32_t up; /* deprecated, maintained for migration compatibility */
> uint32_t down;
> @@ -69,6 +77,7 @@ typedef struct PIIX4PMState {
> Notifier machine_ready;
>
> /* for pci hotplug */
> + struct gpe_regs gperegs;
> struct pci_status pci0_status;
> uint32_t pci0_hotplug_enable;
> uint32_t pci0_slot_device_present;
> @@ -93,8 +102,8 @@ static void pm_update_sci(PIIX4PMState *s)
> ACPI_BITMASK_POWER_BUTTON_ENABLE |
> ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
> ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
> - (((s->ar.gpe.sts[0] & s->ar.gpe.en[0])
> - & PIIX4_PCI_HOTPLUG_STATUS) != 0);
> + (((s->ar.gpe.sts[0] & s->ar.gpe.en[0]) &
> + (PIIX4_PCI_HOTPLUG_STATUS | PIIX4_MEM_HOTPLUG_STATUS)) != 0);
>
> qemu_set_irq(s->irq, sci_level);
> /* schedule a timer interruption if needed */
> @@ -499,7 +508,16 @@ type_init(piix4_pm_register_types)
> static uint32_t gpe_readb(void *opaque, uint32_t addr)
> {
> PIIX4PMState *s = opaque;
> - uint32_t val = acpi_gpe_ioport_readb(&s->ar, addr);
> + uint32_t val = 0;
> + struct gpe_regs *g = &s->gperegs;
> +
> + switch (addr) {
> + case MEM_BASE ... MEM_BASE+DIMM_BITMAP_BYTES:
> + val = g->mems_sts[addr - MEM_BASE];
> + break;
> + default:
> + val = acpi_gpe_ioport_readb(&s->ar, addr);
> + }
>
> PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
> return val;
> @@ -509,7 +527,13 @@ static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
> {
> PIIX4PMState *s = opaque;
>
> - acpi_gpe_ioport_writeb(&s->ar, addr, val);
> + switch (addr) {
> + case MEM_EJ_BASE:
> + dimm_notify(val, DIMM_REMOVE_SUCCESS);
> + break;
> + default:
> + acpi_gpe_ioport_writeb(&s->ar, addr, val);
> + }
> pm_update_sci(s);
>
> PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
> @@ -560,9 +584,11 @@ static uint32_t pcirmv_read(void *opaque, uint32_t addr)
>
> static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
> PCIHotplugState state);
> +static int piix4_dimm_hotplug(DeviceState *qdev, DimmDevice *dev, int add);
>
> static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
> {
> + int i = 0;
>
> register_ioport_write(GPE_BASE, GPE_LEN, 1, gpe_writeb, s);
> register_ioport_read(GPE_BASE, GPE_LEN, 1, gpe_readb, s);
> @@ -576,7 +602,15 @@ static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
>
> register_ioport_read(PCI_RMV_BASE, 4, 4, pcirmv_read, s);
>
> + register_ioport_read(MEM_BASE, DIMM_BITMAP_BYTES, 1, gpe_readb, s);
> + register_ioport_write(MEM_EJ_BASE, 1, 1, gpe_writeb, s);
> +
> + for(i = 0; i < DIMM_BITMAP_BYTES; i++) {
> + s->gperegs.mems_sts[i] = 0;
> + }
> +
> pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
> + dimm_bus_hotplug(piix4_dimm_hotplug, &s->dev.qdev);
> }
>
> static void enable_device(PIIX4PMState *s, int slot)
> @@ -591,6 +625,37 @@ static void disable_device(PIIX4PMState *s, int slot)
> s->pci0_status.down |= (1U << slot);
> }
>
> +static void enable_mem_device(PIIX4PMState *s, int memdevice)
> +{
> + struct gpe_regs *g = &s->gperegs;
> + s->ar.gpe.sts[0] |= PIIX4_MEM_HOTPLUG_STATUS;
> + g->mems_sts[memdevice/8] |= (1 << (memdevice%8));
> +}
> +
> +static void disable_mem_device(PIIX4PMState *s, int memdevice)
> +{
> + struct gpe_regs *g = &s->gperegs;
> + s->ar.gpe.sts[0] |= PIIX4_MEM_HOTPLUG_STATUS;
> + g->mems_sts[memdevice/8] &= ~(1 << (memdevice%8));
> +}
> +
> +static int piix4_dimm_hotplug(DeviceState *qdev, DimmDevice *dev, int
> + add)
> +{
> + PCIDevice *pci_dev = DO_UPCAST(PCIDevice, qdev, qdev);
> + PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, pci_dev);
> + DimmDevice *slot = DIMM(dev);
> +
> + if (add) {
> + enable_mem_device(s, slot->idx);
> + }
> + else {
} else {
> + disable_mem_device(s, slot->idx);
> + }
> + pm_update_sci(s);
> + return 0;
> +}
> +
> static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
> PCIHotplugState state)
> {
> --
> 1.7.9
>
More information about the SeaBIOS
mailing list