[SeaBIOS] [PATCH 01/15] Access DC registers via geode_mem[Read|Write]

[Christian Gmeiner]

Am 02.09.2012 21:50 schrieb "Kevin O'Connor" <kevin at koconnor.net>:
>
> On Sun, Sep 02, 2012 at 09:02:05PM +0200, Christian Gmeiner wrote:
> > Am 02.09.2012 19:59 schrieb "Kevin O'Connor" <kevin at koconnor.net>:
> > >
> > > On Sat, Sep 01, 2012 at 05:12:52PM +0200, Christian Gmeiner wrote:
> > > > There is no reason to access the DC registers via VGA
> > > > memory mapping if we could the access via memory.
> > >
> > > The patch series looks okay to me.  Are these patches specific to the
> > > board you have, or will they work with all the boards currently
> > > supported by the SeaVGABIOS Geode code?
> >
> > The patches are for all supported Geode devices. I try to get access to
GX
> > hardware so that I could test the patches in real hardware. I am
working on
> > a lx800 hardware. I am waiting for the edid patches get merged to come
up
> > with more patches :)
>
> Are the "edid patches" you refer to the ones from Hiroshi Miura, or
> something else?

The one from Hiroshi Miura. As I also want to do some EDID stuff for the
geode. I will have a closer look at his patches tomorrow in office.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.seabios.org/pipermail/seabios/attachments/20120902/626dc3bd/attachment.html>